29 replies to this topic

[siggey]

josh Coghlan, on 14 March 2012 - 06:39 PM, said:

What Would Be The Best Settings For This Program ??

Thanks

every liquid is different, try. my max voltage is 1450mV

[siggey]

philippe75017, on 14 March 2012 - 07:00 PM, said:

hello siggey

1) i specify that i have a custom kernel on LCR-F 2.0
lcrf20_ritchen_921_v1.zip  (i try lcrf20_ritchen_998.zip but it is unstable ; possibly undervolt will help)
and there various available (chocolate, ritchen etc)

try it, if it can't work it simply tell you a message



3) i think i understand now : higher the frequence is, higher the voltage must be, still you can lower the voltage with incredicontrol but not too much low ; is this correct ?
yes

[LUVLiquid]

GREAT APP! mine can run @1228, and it's flying!

but, my settings wont save after every reboot, even  I Set on boot, I'm on liquidnext mix 1.9.2 with a2sd
do any of you got the same problem as mine?

[siggey]

LUVLiquid, on 16 March 2012 - 04:12 AM, said:

GREAT APP! mine can run @1228, and it's flying!

but, my settings wont save after every reboot, even  I Set on boot, I'm on liquidnext mix 1.9.2 with a2sd
do any of you got the same problem as mine?

Strange, are you sure that setting aren't save? Does your phone freeze at reboot? because if settings aren't saved and you boot at 1228 the phone surely freezes.

[LUVLiquid]

I set all the settings as your screenshot, check the set on boot box, apply and quit the app. Then get back in incredicontrol without any reboot, the settings are all reset, set on boot isn't selected anymore, but i can still overclock to 1228 with setCPU, and cm setting shown I'm on 1228 as well.
everything works fine.
but once I reboot, and after it's done booting up, I straight to setcpu and overclock to 1228, it just hang, I need to pull the battery, then try it on CM settings again after the reboot, it's excatly the same so the set on boot setting in increditcontrol apprently not working. I have LNP installed but doesn't enable the use undervolt settings in it.
Really don't know what cause this.

[dr3amz]

fast like hell 2yrs ago club - let your liquid die a peaceful old death

[siggey]

dr3amz, on 16 March 2012 - 08:08 PM, said:

fast like hell 2yrs ago club - let your liquid die a peaceful old death

how with your new Iphone? Faster and stable???
If you don't like your liquid, change it. And write in some other forum.

Edited by siggey, 18 March 2012 - 12:55 PM.

[siggey]

LUVLiquid, on 16 March 2012 - 03:28 PM, said:

I set all the settings as your screenshot, check the set on boot box, apply and quit the app. Then get back in incredicontrol without any reboot, the settings are all reset, set on boot isn't selected anymore, but i can still overclock to 1228 with setCPU, and cm setting shown I'm on 1228 as well.
everything works fine.
but once I reboot, and after it's done booting up, I straight to setcpu and overclock to 1228, it just hang, I need to pull the battery, then try it on CM settings again after the reboot, it's excatly the same so the set on boot setting in increditcontrol apprently not working. I have LNP installed but doesn't enable the use undervolt settings in it.
Really don't know what cause this.

I don't know why, but you can try another app, voltagecontrol, on market.

[Tonza133]

Since I have my liquid running at 1.2Ghz at 1400mV I was wondering how I could raise the maximum speed of the processor?

[elixir.amrit]

Can u place post the settings u used to reach 1.2 Ghz. I can only make it to 1.1Ghz with ondemand on miui - ikroutdroid 2.3.16?

Edited by elixir.amrit, 27 March 2012 - 09:33 PM.