8 replies to this topic

[Vlatko25]

 tpt flasher.rar   405.74K   80 downloads   Ok everything you need here is ZTE Terminal software online upgrader http://wwwen.zte.com...20277270179.zip
   Original ftm recovery (this is gen 1)
   Fastboot Racer thanks to Racer Boy   http://android.modac...very-for-racer/
   PC and of course internet connection
  1.Download software online upgrader ZTE,exctract files to drive C: on your PC,install the app on your PC
  2.Open fastboot racer files,inside is recovery img mooncake 4.0.1.0 (before this install the drivers inside Fastboot Racer folder)
  3.,Unrar my recovery from atach and rename it just like the recovery inside the fastboot racer files from RacerBoy
  4.Move the recovery img from Racerboy files somewere temporary,and put this ftm recovery img already renamed inside Fastboot Racer folder
  5.Turn off you android phone(but do not connect to pc stil),turn it on by pressing power button and volume+ to get into fastboot mode
  6.Then connect your phone with pc and open the Fastboot Racer folder,and inside is MS-DOS BATCH FILE  named windows-flash-gen1-recovery(double click this)
  7.After you have succeded flashing  recovery img to your Racer,don't disconnect it from pc,turn off the phone and then reboot into recovery by turn on button and volume-
  8.Your phone will be in FTM mode(DFU DIagnostic Interface Device)
  9.Now open the Terminal software online upgrader,it will first scan network and then device,it will take some minutes to detect phone
10.After it detecs your phone it will give you information about phone model number etc and it will tell you if you have update or your version is the latest
11.Down in the right corner you will have the option to upgrade it anyway,click on that,the upgrader will start to download files(will tell you in mb and percents)
12.After downloading the files it will extract the files and next step is upgrading,but when this starts you must cancel it and exit from upgrader program and also disconnect phone
13.Now go to drive C:,Program files,Zte Terminal Online upgrade software folder double click,inside you will find two folders with the name of the firmware that you have downloaded
14.One zip and one unzip folder,cut them and put them on safe place,they are tpt files for the current firmware and they can be used to flash tpt firmware with usdl software
15.After this you can again flash the old recovery img in the same way,and no damage to your phone
16.Unrar tpt flasher and inside is flasher,don't forget to put tpt files in this folder if you want to flash another tpt rom(this is difrerent flashing than with online upgrader)
I hope this will help to other users of Zte Racer
Feel free to share here diferent tpt firmware for Zte Racer

Attached Files

•  recovery.rar   2.71MB   80 downloads

Edited by Vlatko25, 23 November 2011 - 03:57 PM.

[Vlatko25]

Vlatko25, on 23 November 2011 - 03:13 PM, said:

tpt flasher.rar   Ok everything you need here is ZTE Terminal software online upgrader http://wwwen.zte.com...20277270179.zip
   Original ftm recovery (this is gen 1)
   Fastboot Racer thanks to Racer Boy   http://android.modac...very-for-racer/
   PC and of course internet connection
  1.Download software online upgrader ZTE,exctract files to drive C: on your PC,install the app on your PC
  2.Open fastboot racer files,inside is recovery img mooncake 4.0.1.0 (before this install the drivers inside Fastboot Racer folder)
  3.,Unrar my recovery from atach and rename it just like the recovery inside the fastboot racer files from RacerBoy
  4.Move the recovery img from Racerboy files somewere temporary,and put this ftm recovery img already renamed inside Fastboot Racer folder
  5.Turn off you android phone(but do not connect to pc stil),turn it on by pressing power button and volume+ to get into fastboot mode
  6.Then connect your phone with pc and open the Fastboot Racer folder,and inside is MS-DOS BATCH FILE  named windows-flash-gen1-recovery(double click this)
  7.After you have succeded flashing  recovery img to your Racer,don't disconnect it from pc,turn off the phone and then reboot into recovery by turn on button and volume-
  8.Your phone will be in FTM mode(DFU DIagnostic Interface Device)
  9.Now open the Terminal software online upgrader,it will first scan network and then device,it will take some minutes to detect phone
10.After it detecs your phone it will give you information about phone model number etc and it will tell you if you have update or your version is the latest
11.Down in the right corner you will have the option to upgrade it anyway,click on that,the upgrader will start to download files(will tell you in mb and percents)
12.After downloading the files it will extract the files and next step is upgrading,but when this starts you must cancel it and exit from upgrader program and also disconnect phone
13.Now go to drive C:,Program files,Zte Terminal Online upgrade software folder double click,inside you will find two folders with the name of the firmware that you have downloaded
14.One zip and one unzip folder,cut them and put them on safe place,they are tpt files for the current firmware and they can be used to flash tpt firmware with usdl software
15.After this you can again flash the old recovery img in the same way,and no damage to your phone
16.Unrar tpt flasher and inside is flasher,don't forget to put tpt files in this folder if you want to flash another tpt rom(this is difrerent flashing than with online upgrader)
I hope this will help to other users of Zte Racer
Feel free to share here diferent tpt firmware for Zte Racer

TPT files are mbn files and  image files
amss(mbn file)
appsboot(mbnfile)
amsshd(mbnfile)
appsboothd(mbnfile)
cefs(mbnfile)
oemsbl(mbnfile)
partition(mbnfile)
partition_zte(mbnfile)
oemsblhd(mbnfile)
qcsblhd_cfgdata(mbnfile)
boot(image file)
system(image file)
recovery(image file)    
THIS IS SAMPLE HOW LOOKS LIKE TPT FILES

Edited by Vlatko25, 23 November 2011 - 04:06 PM.

[Vlatko25]

Vlatko25, on 23 November 2011 - 04:05 PM, said:

TPT files are mbn files and  image files
amss(mbn file)
appsboot(mbnfile)
amsshd(mbnfile)
appsboothd(mbnfile)
cefs(mbnfile)
oemsbl(mbnfile)
partition(mbnfile)
partition_zte(mbnfile)
oemsblhd(mbnfile)
qcsblhd_cfgdata(mbnfile)
boot(image file)
system(image file)
recovery(image file)
THIS IS SAMPLE HOW LOOKS LIKE TPT FILES

Rahulj85 does this helped for youD:

[plegdroid]

thank you, just hope I'll never have to use it, but is nice to know how to, thank you for sharing:)

[Vlatko25]

when i have bought zte racer,i was null knowledge for android,but thanks to android modaco,4pda forum i learned a lot,so now i will help to anyone here,like all of you guys have done too much for me,i wish i could develop roms and kernels in the future

[Vlatko25]

no problem plegdroid:) always here for you:)

[plegdroid]

Vlatko25, on 23 November 2011 - 09:15 PM, said:

no problem plegdroid:) always here for you:)

thanks mate:D

[kiran-reddy]

whats the size of the files..? total file's size ?

[dell-xcd35]

hi to all mods.....i need urgent mods help...
by mistake i have just flashed zte-blade mbn files

now only red light i visible and dfu mode is working.

and all tpt file links are not working....
pls if any of you have these files for dellxcd28(zte racer) upload it

its urgent.