13 replies to this topic

[rammstein_08]

Hey guys,i have a Streak 5 from a market near by.i bought it very cheap since the LCD was cracked.i don't know his history.
so,i got a new LCD from ebay,replaced it easy.but when i tried to start the phone it's stuck at DELL logo.i tried flashing it with several versions of android using fastboot to install the recovery and put the update.pkg on the sd but when i hit "software upgrade via update,pkg on sd card" the screen goes black and that's all.it stays black forever.also,when i hold the camera& power button i get this for a split second:

TE Fail.Try again.
2nd TE = 48
TE pass

(sometimes instead of 48 is 500 or 50)
please help.i have spent hours on forums trying to figure this out..

[MySeLfPT]

Did you try QDL tool / streakrepair?

[80sLoveCHILD]

What recovery did you flash?

Try streakmod. You can find it @ xda

[rammstein_08]

80sLoveCHILD, on 23 February 2012 - 06:56 PM, said:

What recovery did you flash?

Try streakmod. You can find it @ xda

ok so i managed to get into streak mod and i get this:


e: can not mount / dev / block / innersd0p5
e: can not mount CACHE: recovery / log
e: can not open CACHE: recovery / log
e: can not mount / dev / block / innersd0p5

it seems it is the inner SD right?i took it apart earlier and put another SD in and still no luck.

taking it apart again right now and trying to get into strakmod and see what happens..

[80sLoveCHILD]

I think there is a tutorial about partioning a new internal sd card on modaco. Ill see if I can find it

[80sLoveCHILD]

http://android.modac...ge-up-to-62-gb/

Might be a good place to start. have a route around in this forum, i'm pretty sure there are other threads on this. See  http://android.modac...eed-Help-Please!

Edited by 80sLoveCHILD, 23 February 2012 - 09:01 PM.

[rammstein_08]

you sir,saved my streak.i was about to sell it for nothing.i replaced the internal sd card with a new 2gb (no need for special installation) and after may many tries,i managed to get into  streakmod and install the latest gingerbread thank you very much for your help! (ad sorry for my english)

80sLoveCHILD, on 23 February 2012 - 08:59 PM, said:

http://android.modac...ge-up-to-62-gb/

Might be a good place to start. have a route around in this forum, i'm pretty sure there are other threads on this. See  http://android.modac...eed-Help-Please!

[rammstein_08]

ok,another problem.the os installation went fine,everything went well until i went into gallery and selected the music animated wallpaper to view it.the back,menu and home buttons blinked 3 times and it's back to the dell logo.in the install.txt file i put only this:

adwlauncher
bios
density180

i did something wrong here?

80sLoveCHILD, on 23 February 2012 - 08:59 PM, said:

http://android.modac...ge-up-to-62-gb/

Might be a good place to start. have a route around in this forum, i'm pretty sure there are other threads on this. See  http://android.modac...eed-Help-Please!

Edited by rammstein_08, 24 February 2012 - 08:48 AM.

[80sLoveCHILD]

Blinking leds means wrong baseband or something like that.

I would head over to xda and get the DSC 0.7 ROM. Make sure you read install instructions because you need to fastboot flash an AMSS file and possibly one other file. This should fix the flashing lights. DSC is currently the most stable streak ROM imho.

[rammstein_08]

after flashing DSC 0.7 i got this on the dell logo:

/system/bin/e3fsck -y /dev/block/innersd0p6

    File system check returned status 2048,e2fsck status was8

Please send this unit to software development for debugging.

Formatting your device to repair it.Please don't remove the battery.

    Data formatted OK.

After that i get DSC logo for a fiew seconds an then a couple of restarts and stuck at dell log again...

I have flashed the required files and recovery before flashing the os.

80sLoveCHILD, on 24 February 2012 - 01:26 PM, said:

Blinking leds means wrong baseband or something like that.

I would head over to xda and get the DSC 0.7 ROM. Make sure you read install instructions because you need to fastboot flash an AMSS file and possibly one other file. This should fix the flashing lights. DSC is currently the most stable streak ROM imho.

Edited by rammstein_08, 24 February 2012 - 03:11 PM.

[rammstein_08]

that's it..i give up.i tried several SD cards for the inner slot.even a SD HC one.the same results.after flashing fail,every card needed to be formatted to be accessible.i am guessing the inner SD port is faulty or something.any sugestions? i think i'm gonna sell it for parts..

[rammstein_08]

so after i put the screws back in place i don't get the error on the dell logo.with the 2.4 gingerbread i got BIOS startup and then restart and freeze at dell logo.after battery taken out for 2 minutes,same thing,BIOS,restart,freeze.

with the DSC it restarts during installation,once during recovery screen itself.clearly has some hardware problem.no ideas left..

[80sLoveCHILD]

No ideas im afraid. Maybe ask over at xda. Seems a bit more alive than here

[rammstein_08]

thank you for your help!

80sLoveCHILD, on 24 February 2012 - 06:50 PM, said:

No ideas im afraid. Maybe ask over at xda. Seems a bit more alive than here