434 replies to this topic

[Jaisan888]

Backed-up my system set-up of B934 with CWM, installed Infusion (no storage-fix). Restored the device with that CWM back-up, now my phone is back showing ICS B934 with all the previous applications and settings...................................but but the performance is noticeably increased ie screen is more receptive and everything is less lethargic.
Which is why my device is "Still on ICS B934/Infusion ?". I know not why..........what has occurred.

Hope you enjoy your beer...........................................

Edited by Jaisan888, 27 September 2012 - 09:52 PM.

[BigEric]

Edit: False Alarm!!

I stumbled on this post of Cyda's:

Quote

I've given you a link to a guide that explains how to install CWM and I have just tested the links, they work fine here.

Here is a direct link to the putlocker link: http://www.putlocker...C58272EBA80A95F

That link still works and then the instructions at the top of this thread work!

Thanks :-)

E

Hi,

I'm hoping one day I'll get the hang of all of this...

I'm trying to install clockworkmod following the instructions here: http://huaweig300.co...rkmod-recovery/

I'm using a Mac, my phone's baseband is 2030 and has stock ICS installed.

I have rooted the phone already.

The section in the instructions I'm at is:

• Make sure your phone is still connected to your computer.
  
  
• From your computer, go back to the Terminal, and make sure it is still pointed to the Tools for G300 Mac folder.
  
  
• Enter the following commands into the terminal:
  
  chmod +x bootloader-g300.sh
  ./bootloader-g300.sh
  Troubleshooting
  
  If you are stuck on < waiting for device > for longer than 10 minutes, or receive error device not found, unplug the cable from your computer and plug it into another USB port. It's best to plug it into a port on the back of your computer. If this doesn't fix the problem, disconnect your phone, restart your computer and phone, and then try again.
  
  
• Wait for your phone to reboot.
  
  
• Keep the terminal window open.
  
  
• Power off your phone and disconnect it from your computer.
  
  
• Remove the battery, wait 10 seconds and then reinsert it. Make sure you do this or the following steps will not work!
  
  
• Hold the Volume Down and Power on button together for 15 seconds. Your phone should start and freeze on the splash screen.
  
  
• Reconnect your phone to your computer.
  
  
• From your computer, go back to the Terminal, and make sure it is still pointed to the Tools for G300 Mac folder.
  
  
• Enter the following commands into the terminal:
  
  chmod +x clockwork-g300.sh
  ./clockwork-g300.sh

At this point I'm getting an error in my Terminal saying:

bigeric$ ./clockwork-g300.sh
error: cannot load 'cwm.img'

rebooting...

Then I'm back at the prompt and the phone reboots?

Why can't I get CWM to install?

E

Edited by BigEric, 05 October 2012 - 06:25 PM.

[chyllyphylly]

Hi, does anyone have a link to the cwmrecovery.bat files?  I am downloading via my phone and it doesn't like the cyberloocker sites.

I tried the img one, but got confused

[chyllyphylly]

Anyone?  this is the one thing that is stopping me installing gapps

[fmgc13]

Hi. I currently am using the latest version of Infusion ROM but I want to overclock.. so do I install a custom kernel and which one?

[chyllyphylly]

chyllyphylly, on 19 October 2012 - 11:34 AM, said:

Hi, does anyone have a link to the cwmrecovery.bat files?  I am downloading via my phone and it doesn't like the cyberloocker sites.

I tried the img one, but got confused

Sorry to be a pain,  but anyone able to help...... please?

[tcpaulh]

chyllyphylly, on 24 October 2012 - 06:58 PM, said:

Sorry to be a pain,  but anyone able to help...... please?

This any good? http://www.solidfile...m/d/f25248ea3c/

[chyllyphylly]

Thats perfect, just downloaded via my phone.

Ill let you later if it works :-)

[only1carra]

I have today recieved my Huawei G330 after having a G300 before.
The phone arrived from China Unlocked and rooted with a recovery called GENO mod recovery installed.

Unfortunately the recovery was in Chinese and the ICS software had Chinese elements. SOO.......
I flashed the ICS software rom I was using on my G300, I thought it could handle the same software but seems not!

The phone will now not start up and wont go into recovery either. When it starts up it flashes onto a black screen for 4 seconds and then onto the white and red 3G WO screen for a secon, as if it is restarting every 4 seconds. When you try to access recovery now itjust freezes onto the Splash screen

ANy ideas how I can fix this???? If I could at leat get back into the recovery that would be a start, ive tried installing CWM recovery with no joy, is there a specific CWM recovery for this model that I can try and if so do you have a link to a direct download.
Thanks

[aarpey]

Hello,
After I successfully updated my G300 to ICS, I noticed that it is not possible to turn on or off the mobile data via the widget. Everything else works OK on widget, I can switch on and off wifi, bluetooth etc. I tried to restart the phone, to remove the battery, to remove than replace the widget on home screen but nothing helped. Has someone some advice?

[Loki86]

what version of recovery is in cmw easy installer?

Edited by Loki86, 10 November 2012 - 11:51 PM.

[pabloazazel]

please how can I use Gobackup.apk???

[funbags666]

Hello. I've been trying for the last several days to flash ICS onto my new g300. I purchased it unlocked from an Australian eBay seller. It's an Australian Vodafone version. I ran the firmware update from 'about phone' and it downloaded a 40 meg file and ran it (there was no SD card present). It successfully installed. I then got a micro sd and rooted and backed up the imei. Now ... No matter what firmwares I download and even running middle.app I get an update failed screen. It won't let me change a thing. I'm stuck in GB. What am I doing wrong?

[matthewfrosty]

So I wanted to unlock my phone to go from Vodafone to GiffGaff, I bought the phone from a Vodafone shop so obviously its locked. Now I've got an unlock code so I put the GiffGaff sim in and try to dial the unlock code but I cant because I have no service, any idea what im missing/ doing wrong?

[keynex]

What bootlogo is this? Doesn't like that

Before i installed ICS there was a huawei logo

Edited by keynex, 12 December 2012 - 07:58 PM.

[djalpha]

keynex, on 12 December 2012 - 07:56 PM, said:

What bootlogo is this? Doesn't like that

Before i installed ICS there was a huawei logo

You have installed B926 (chinese update), so bootloader image has changed. But reading through the forum, you will find a way to change it (cannot find direct link for you)
[EDIT] http://www.modaco.co...-splash-screen/

Edited by djalpha, 12 December 2012 - 08:08 PM.

[Jossel]

Hi,

New to the forum so hello.

I recently bought a g300 got it unlocked and love it, for the most part. But I want to make it faster and smoother... But I'm unsure on how to root. I use a mac, I think my main problem is not understanding terminal... Anyone able to help?

Thanks

Joe

[bnaxirl]

Posted this in another thread before I saw this, might be better suited here Really looking to get away from the official ICS update, any suggestions?

Hi guys, new to this forum and while I find it very informative I also find it very intimidating.  I'm on the official OTA ICS update and I find it buggy, I've followed the excellent tutorial on this page and have arrived at "how to install a custom ICS ROM", which contains a link back to the forum. This is where I come unstuck, how and where do I choose a rom, how do I know which is the best rom to choose? I really could do with the step by step details as given in the rest of the tutorial

[diddydavro]

bnaxirl, on 16 December 2012 - 11:01 AM, said:

Posted this in another thread before I saw this, might be better suited here Really looking to get away from the official ICS update, any suggestions?

Hi guys, new to this forum and while I find it very informative I also find it very intimidating.  I'm on the official OTA ICS update and I find it buggy, I've followed the excellent tutorial on this page and have arrived at "how to install a custom ICS ROM", which contains a link back to the forum. This is where I come unstuck, how and where do I choose a rom, how do I know which is the best rom to choose? I really could do with the step by step details as given in the rest of the tutorial

With regard to which ROM to choose, there are several custom ROM's available on the forum. I'm still on B886 (Gingerbread) so I can't advise. However I used this excellent guide to root my phone and I think you will find it useful? http://www.modaco.co...date-root-more/

[bnaxirl]

Thanks diddydavro but I've already rooted using that method, It's what to do when I get to the last stage (instal a custom rom) that I get stuck. It's what to pick and from where. A lot of what's written is not easy to understand for the newbie, which is why I was looking for a step by step guide.