16 replies to this topic

[KasioPC]

After installing the B888 ROM, I tried restoring a nandorid backup. It restored fine, but will now only boot into CWM.

I've tried flashing all the Huawei ROMS, but they get stuck on "Update failed"

The only one I can get booting is Seb404's debranded ROM flashed via CWM.

I think maybe the partitions were somehow changed - anyone have any ideas for this?

[G300]

I'm getting the same as you KasioPC best put a warning in the B888 rom topic.
I like the B888 so not to bothered as log as don't need to send back phone

[KasioPC]

G300, on 08 May 2012 - 09:18 AM, said:

I'm getting the same as you KasioPC best put a warning in the B888 rom topic.
I like the B888 so not to bothered as log as don't need to send back phone

Done and done. I think we need someone to post a list of the partition sizes from one not flashed with B888, and compare it with ours.

[FrownBreaker]

KasioPC, on 08 May 2012 - 09:28 AM, said:

Done and done. I think we need someone to post a list of the partition sizes from one not flashed with B888, and compare it with ours.

$ export PATH=/data/local/bin:$PATH
$ df
Filesystem Size   Used   Free   Blksize
/dev    197M 64K   197M   4096
/mnt/asec   197M 0K   197M   4096
/mnt/obb    197M 0K   197M   4096
/system 295M   258M 36M   4096
/data   755M   213M   542M   4096
/cache 188M 4M   184M   4096
/cust    59M 12M 46M   4096
/HWUserData   2G 96K 2G   32768
/mnt/sdcard 29G 18G 10G   8192
/mnt/secure/asec: Permission denied
/mnt/asec/com.techploy.twitplay-1 2M   126K 1M   512
/mnt/asec/com.SwannView-1 2M   737K 1M   512
/mnt/asec/com.quoord.tapatalkpro.activity-1 6M 4M 1M   512
$

This is the output from DF note there is a permission denied. Not sure what the /mnt/asec stuff is looks like a couple of apps I'm running Swannview, Twitplay and Tapatalk.
Might be something related to apps stored on the SD card being mounted on launch?

Edited by FrownBreaker, 08 May 2012 - 09:42 AM.

[FrankieADZ]

i didnt do any nandorid backup, i wonder if it will affect you if u restore a rom created now u have b888

[Frankish]

I'm confused. Can you not just wipe data etc and stick with B888 or does that not boot now? Maybe there is something blocking downgrading? Maybe get a rom dump of B888, copy over the system folder to your system and then wipe data see if that boots?

[KasioPC]

Frankish, on 08 May 2012 - 09:53 AM, said:

I'm confused. Can you not just wipe data etc and stick with B888 or does that not boot now? Maybe there is something blocking downgrading? Maybe get a rom dump of B888, copy over the system folder to your system and then wipe data see if that boots?

Nope, cannot flash the B888 ROM the normal way after trying to restore my CWM backup. The partition sizes of /system and /cust are different:

Filesystem			 Size   Used   Free   Blksize
/dev				   197M	64K   197M   4096
/mnt/asec			  197M	 0K   197M   4096
/mnt/obb			   197M	 0K   197M   4096
/system				377M   263M   114M   4096
/data				  755M	71M   684M   4096
/cache				 188M	 4M   184M   4096
/cust				   78M	 9M	69M   4096
/HWUserData			  2G	96K	 2G   32768
/mnt/sdcard			  1G   477M   925M   4096

[G300]

$ export PATH=/data/local/bin:$PATH
$ df
Filesystem Size   Used   Free   Blksize
/dev    197M 64K   197M   4096
/mnt/asec   197M 0K   197M   4096
/mnt/obb    197M 0K   197M   4096
/system 295M   253M 41M   4096
/data   755M 87M   668M   4096
/cache 188M 4M   184M   4096
/HWUserData   2G 96K 2G   32768
/cust    59M 25M 33M   4096
/mnt/sdcard   1G   915M  1018M   4096
/mnt/secure/asec: Permission denied

Posted from phone had to copy paste.

Edited by G300, 08 May 2012 - 10:12 AM.

[FrankieADZ]

ok..so this all means what?
we cant flash roms via clockwork unless they are B888 or higher based or something? (i havent a clue tbh..noob)

[FrownBreaker]

FrankieADZ, on 08 May 2012 - 10:12 AM, said:

ok..so this all means what?
we cant flash roms via clockwork unless they are B888 or higher based or something? (i havent a clue tbh..noob)

The previous ROM Images assume a specific number and size of partitions. This has changed with this update. So to restore to a previous ROM a process to redefine the partitions to the old number and size is needed. Once this process has been written and tested it will be possible to restore the old ROMs.

If you look at the partions reported in the posts, there are 2 that seem to be different:

• System /system partition pre  B888 ROM was 295M post B88 is now 377M
  
• Custom /cust partition pre  B888 ROM was 59M post B88 is now 78M

Edited by FrownBreaker, 08 May 2012 - 10:24 AM.

[KasioPC]

Can someone who hasn't flashed B888 reboot into Clockwork, connect via USB and go to 'adb shell'

Then type 'parted /dev/block/mmcblk0 print' and post what you get.

[FrankieADZ]

FrownBreaker, on 08 May 2012 - 10:18 AM, said:

The previous ROM Images assume a specific number and size of partitions. This has changed with this update. So to restore to a previous ROM a process to redefine the partitions to the old number and size is needed. Once this process has been written and tested it will be possible to restore the old ROMs.

thanks alot for telling/teaching me Im learning...thanks everyone

Ah...maybe it could in preparation for ICS or something

[KasioPC]

Have just tried flashing B888 and it is working fine. Will try selectively restoring bits of my CWM backup and see what happens

[FrownBreaker]

KasioPC, on 08 May 2012 - 10:18 AM, said:

Can someone who hasn't flashed B888 reboot into Clockwork, connect via USB and go to 'adb shell'

Then type 'parted /dev/block/mmcblk0 print' and post what you get.

I'm at at work -no USB access to the phone.
parted is runnable from the phone's terminal but says access denied, tried su but the new prompt still says access denied.

Is there a way to get terminal access to parted say from recovery, I have CWR installed (at a look but could not see it)
I've 3g access at work and the G300 phone, rooted with Seb's CWR. Happy to report back the parted output but cannot run it and no ADB at work.

Edited by FrownBreaker, 08 May 2012 - 11:50 AM.

[KasioPC]

FrownBreaker, on 08 May 2012 - 11:50 AM, said:

I'm at at work -no USB access to the phone.
parted is runnable from the phone's terminal but says access denied, tried su but the new prompt still says access denied.

Is there a way to get terminal access to parted say from recovery, I have CWR installed (at a look but could not see it)
I've 3g access at work and the G300 phone, rooted with Seb's CWR. Happy to report back the parted output but cannot run it and no ADB at work.

Unfortunately not, CWR is the only way to access parted, and it needs to be done via ADB as obviously CWR doesn't have a terminal

[Sebastian404]

<p>

KasioPC, on 08 May 2012 - 10:18 AM, said:

Can someone who hasn't flashed B888 reboot into Clockwork, connect via USB and go to 'adb shell'Then type 'parted /dev/block/mmcblk0 print' and post what you get.

parted wont work with this device.. however:

EDIT: seems to be something up with posting.. see the attached file.

Attached Files

•  fdisk.txt   2.12K   12 downloads

[KasioPC]

Sebastian404, on 08 May 2012 - 06:53 PM, said:

<p>parted wont work with this device.. however:

EDIT: seems to be something up with posting.. see the attached file.

I realised after I tried it, although I thought it may have been the ROM messing up the partitions. The fdisk output should hopefully be enough to rebuild the partition table manually - I'll have a crack on my day off (after making a dd backup )