466 replies to this topic

[Geno.Kolar]

Instructions:
ROM

• Base on offical ICS 4.0
  
• All work good
  
• This ROM is compatible with both the U8815 and U8818 models.

INSTALL OFFICAL ICS & UNLOCK PHONE

     backup your Imei let you can downgrade to offical gingerbread (http://www.modaco.co...m-now-possible/)    
     Your must upgrade to offical ICS  

• Download the official download from the Huawei site ( http://www.huaweidev...softid=NDE4NjY= )
  
• Unzip the file and copy the dload folder and (optional) vendor folder on to your SD card.
  
• Go to Settings > Storage > Software upgrade to start the ICS upgrade - make sure you have enough battery before going any further!
  
• (Optional )Flash the vendor package from the official download from the Huawei site - (this is optional but I didn't do it and my ICS works great)
  
• Boot in to freshly installed ICS, install ADB drivers from the ISO mounted on the phone, enable USB debugging and then connect USB cable - make sure adb works.
  
• Download Attached Files  'unlockbootloader.exe'
  
• Ran 'unlockbootloader.exe' and clicked 'ROOT Your Phone'.
  
• Ran 'unlockbootloader.exe' and clicked 'Unlock BOOTLOADER' - app closed on completion.
  
• Power off your phone, remove battery for a few seconds and replace, then power on whilst holding vol. down and power to go in to fastboot - the phone will hang on the splash screen whilst in fastboot.
  
• Then go to this thread ( http://www.modaco.co...15ascend-g-300/ ) and follow the instructions to install clockworkmod recovery.

INSTALL

• Grab the ROM and stick them on your SD.
  
• Boot in to Recovery by turning the phone off, and turning it on while holding the volume up key (not volume down like a lot of phones, volume down takes you to the bootloader).
  
• 'Wipe Data/Factory Reset'
  
• NB: I advise you reboot recovery here, CWM seems a bit broken with flashes after wipes, it seems.
  
• 'Install zip from sdcard' -> 'Choose zip from sdcard' -> ROM
  
• 'Reboot System Now'
  
• Give it time - first boot takes longer than usual.
  
• Run through the first time setup, language, date/time, Google account etc.
  
• Have fun!

Downloads:

http://sourceforge.n....0.zip/download


HUAWEI APP
maybe some body need the huawei app,this can work on Miuiv4

Attached Files

•  device-2012-07-04-213952.png   31.41K   766 downloads
•  device-2012-07-04-213935.png   507.42K   842 downloads
•  device-2012-07-04-213925.png   43.06K   703 downloads
•  unlockbootloader.exe   1.86MB   6505 downloads

Edited by Geno.Kolar, 05 July 2012 - 12:09 AM.

[Hans Gruber]

Good work. I've never tried MIUI so I look forward to having a play with it

[FrankieADZ]

nice

good to see more ICS roms heading to the G300

[Cyda]

Nice one. Thanks for this.

Edit: Oh, just for the record, when updating with the official update, there is no need to flash the vendor files. I didn't nor did most other people from what I have read.

Edited by Hpez, 04 July 2012 - 01:55 PM.

[Dazzozo]

I recognise those instructions in the OP from somewhere...

[haxxbaxx]

always wanted miui on my blade, awesome that someone has done it, will try once all this gets simplified

[omegamoon]

Ah, now we're talking. I'm using MIUI as my daily ROM on my Acer Liquid E and I just love it.
By the way, it's just amazing the speed of development the last day or two, it's hard to keep up the reading if you also need to work a bit now and then

[Tec_Fil]

after use unlockbootloader.exe for root and unlock bootloader, bootloader remains locked...

[FrankieADZ]

Tec_Fil, on 04 July 2012 - 03:08 PM, said:

after use unlockbootloader.exe for root and unlock bootloader, bootloader remains locked...

not if u use the unlockbootloader.exe correctly according to people who have used/done it.

[Tec_Fil]

I folowed the instructions at the 1st post and now when i try to do a forced update device show me a pink screen

[pumemule]

could you please make an picture from the lang settings?
I ask to know if it have hebrew(עברית)?

[Tec_Fil]

to use unlockbootloader.exe device had to be in download mode or what? This isn´t specified in instructions

[Cyda]

Tec_Fil, on 04 July 2012 - 03:33 PM, said:

to use unlockbootloader.exe device had to be in download mode or what? This isn´t specified in instructions

To use unlockbootloader.exe you want to boot into ICS and enable USB debugging, then use the tool to root and then to unlock bootloader.

[wrtease]

no .you can do it normal through usb.

[FrankieADZ]

Tec_Fil, on 04 July 2012 - 03:19 PM, said:

I folowed the instructions at the 1st post and now when i try to do a forced update device show me a pink screen

u need to place the ICS update.app file in a dload file on the root of ur external SD card.

[Geno.Kolar]

Dazzozo, on 04 July 2012 - 01:52 PM, said:

I recognise those instructions in the OP from somewhere...

I'm lazy, very easy to copy, never mind

[FrankieADZ]

Geno.Kolar, on 04 July 2012 - 03:49 PM, said:

I'm lazy, very easy to copy, never mind

dont blame ya, think just about everyone else would have done the same(thanks btw)

[Cyda]

The upgrade instructions for ICS look a little confusing as they are missing a couple of things so I have added a few more steps to clear things up.

These are the steps I took:

• Download the official download from the Huawei site ( http://www.huaweidev...softid=NDE4NjY= )
  
• Unzip the file and copy the dload folder and (optional) vendor folder on to your SD card.
  
• Go to Settings > Storage > Software upgrade to start the ICS upgrade - make sure you have enough battery before going any further!
  
• (Optional )Flash the vendor package from the official download from the Huawei site - (this is optional but I didn't do it and my ICS works great)
  
• Boot in to freshly installed ICS, install ADB drivers from the ISO mounted on the phone, enable USB debugging and then connect USB cable - make sure adb works.
  
• Download 'unlockbootloader.exe' from http://www.mediafire...v9a6xmvz1ut832a
  
• Ran 'unlockbootloader.exe' and clicked 'ROOT Your Phone'.
  
• Ran 'unlockbootloader.exe' and clicked 'Unlock BOOTLOADER' - app closed on completion.
  
• Power off your phone, remove battery for a few seconds and replace, then power on whilst holding vol. down and power to go in to fastboot - the phone will hang on the splash screen whilst in fastboot.
  
• Then go to this thread ( http://www.modaco.co...15ascend-g-300/ ) and follow the instructions to install clockworkmod recovery.

Edited by Hpez, 04 July 2012 - 04:16 PM.

[wrtease]

very good post and should be pinned for ics for new members

Edited by wrtease, 04 July 2012 - 04:18 PM.

[flibblesan]

Nice to see you here, Genokolar! I really enjoyed your work on the Huawei U8800 so I'm happy to see you with the G300.