106 replies to this topic

[hecatae]

currently checking caf for:

hardware/qcom/media/mm-core/omxcore/Android.mk:47: *** Unsupported target platform msm7x27a. Stop.

[yayakuya]

hecatae, on 26 December 2012 - 10:49 PM, said:

currently checking caf for:

hardware/qcom/media/mm-core/omxcore/Android.mk:47: *** Unsupported target platform msm7x27a. Stop.

i see, how about another sources? or this is a best available one ported to L3? i just try to change zimage from CM9's kernel into this, and i thought that's works because it pass a LG logo (not stuck)... but LOL, it's bootloop and screen goes to 4bit layer  
is the problem on boot image? would you tell me which one (ramdisk root) i have to change???
i'm sorry if you feel pushed by this, but i can't install CM9 properly (blurred screen problem) and stock rom make me so borred even has any tweaks. i still not satisfied....
please, make it real......

[hecatae]

yayakuya, on 27 December 2012 - 02:48 AM, said:

i see, how about another sources? or this is a best available one ported to L3? i just try to change zimage from CM9's kernel into this, and i thought that's works because it pass a LG logo (not stuck)... but LOL, it's bootloop and screen goes to 4bit layer  
is the problem on boot image? would you tell me which one (ramdisk root) i have to change???
i'm sorry if you feel pushed by this, but i can't install CM9 properly (blurred screen problem) and stock rom make me so borred even has any tweaks. i still not satisfied....
please, make it real......

Make sure you have:

Ubuntu 12.04 (Precise Pangolin) 64-bit
Your computer has  at least 4GB RAM
Good Internet connection

install dependencies:

$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
  zip curl zlib1g-dev zlib1g-dev:i386 libc6-dev lib32ncurses5-dev \
  ia32-libs x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 \
  lib32z-dev libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 \
  tofrodos python-markdown libxml2-utils xsltproc readline-common \
  libreadline6-dev libreadline6 lib32readline-gplv2-dev libncurses5-dev \
  lib32readline5 lib32readline6 libreadline-dev libreadline6-dev:i386 \
  libreadline6:i386 bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev lib32bz2-dev \
  libsdl1.2-dev libesd0-dev squashfs-tools pngcrush schedtool libwxgtk2.6-dev
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so

Configure USB:

$ gksudo gedit /etc/udev/rules.d/51-android.rules

add this to the above:

Quote

#Garmin-Asus
SUBSYSTEM==usb", ATTR{idVendor}==091E", MODE=0666"

#Google
SUBSYSTEM==usb", ATTR{idVendor}==18d1", MODE=0666"

#HTC
SUBSYSTEM==usb", ATTR{idVendor}==0bb4", MODE=0666"

#Huawei
SUBSYSTEM==usb", ATTR{idVendor}==12d1", MODE=0666"

#K-Touch
SUBSYSTEM==usb", ATTR{idVendor}==24e3", MODE=0666"

#KT Tech
SUBSYSTEM==usb", ATTR{idVendor}==2116", MODE=0666"

#Kyocera
SUBSYSTEM==usb", ATTR{idVendor}==0482", MODE=0666"

#Lenovo
SUBSYSTEM==usb", ATTR{idVendor}==17EF", MODE=0666"

#LG
SUBSYSTEM==usb", ATTR{idVendor}==1004", MODE=0666"

#Motorola
SUBSYSTEM==usb", ATTR{idVendor}==22b8", MODE=0666"

#NEC
SUBSYSTEM==usb", ATTR{idVendor}==0409", MODE=0666"

#Nook
SUBSYSTEM==usb", ATTR{idVendor}==2080", MODE=0666"

#Nvidia
SUBSYSTEM==usb", ATTR{idVendor}==0955", MODE=0666"

#OTGV
SUBSYSTEM==usb", ATTR{idVendor}==2257", MODE=0666"

#Pantech
SUBSYSTEM==usb", ATTR{idVendor}==10A9", MODE=0666"

#Philips
SUBSYSTEM==usb", ATTR{idVendor}==0471", MODE=0666"

#PMC-Sierra
SUBSYSTEM==usb", ATTR{idVendor}==04da", MODE=0666"

#Qualcomm
SUBSYSTEM==usb", ATTR{idVendor}==05c6", MODE=0666"

#SK Telesys
SUBSYSTEM==usb", ATTR{idVendor}==1f53", MODE=0666"

#Samsung
SUBSYSTEM==usb", ATTR{idVendor}==04e8", MODE=0666"

#Sharp
SUBSYSTEM==usb", ATTR{idVendor}==04dd", MODE=0666"

#Sony Ericsson
SUBSYSTEM==usb", ATTR{idVendor}==0fce", MODE=0666"

#Toshiba
SUBSYSTEM==usb", ATTR{idVendor}==0930", MODE=0666"

#ZTE
SUBSYSTEM==usb", ATTR{idVendor}==19D2", MODE=0666"

Set proper permissions:

$ sudo chmod a+r /etc/udev/rules.d/51-android.rules

JAVA JDK Installation:
http://www.oracle.co...ds-1637591.html

$ sudo apt-get purge openjdk-\* icedtea-\* icedtea6-\*

install Java JDK:

$ sudo mkdir -p /opt/java/64/
$ sudo cp jdk-6u34-linux-x64.bin /opt/java/64
$ sudo su -
$ cd /opt/java/64
$ chmod +x jdk-6u34-linux-x64.bin
$ ./jdk-6u34-linux-x64.bin
$ exit

Add JDK PATH to .bashrc:

$ gksudo gedit ~/.bashrc

Add these lines:

# Java PATHs
export JAVA_HOME=/opt/java/64/jdk1.6.0_34
export PATH=$PATH:$JAVA_HOME/bin

Android SDK:

Download the SDK here:

http://developer.and.../sdk/index.html

Extract the SDK and place it in your home directory.

Add AndroidSDK PATH to .bashrc:

$ gksudo gedit .bashrc

Add the following lines:

# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin

Add PATH to .profile:

$ gksudo gedit .profile

Add these lines:

PATH=$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"

To use the ADB Update software (or to verify a working adb path), use the following command:

$ android

Install the Repo:

$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo ] ~/bin/repo
$ chmod a+x ~/bin/repo

Initialize the CyanogenMOD 9 Repo:

$ mkdir android
$ cd android
$ mkdir system
$ cd system
$ repo init -u git://github.com/CyanogenMod/android.git -b gingerbread

Finally:

$ repo sync -j16

borrowed and adapted from Compile ParanoidAndroid

[hecatae]

next

~/android/system/vendor/cyanogen/get-rommanager

then

cd ~/android/system
. build/envsetup.sh
breakfast p350
breakfast mimmi
breakfast robyn
breakfast tass

or any other qvga device, there is no e400 device tree for cm7.2 so you have options of grabbing the e400 device tree from cm9 and dropping it into /devices/lge or modifying an existing device tree.

if you drop cm9 e400 device tree in, you will need to change all wpa supplicant 8 lib references to wpa supplicant 6 lib.

edit alternatively just delete it:

Package complete: /home/hecatae/cm7.2/out/target/product/e400/cm-7-20121227-UNOFFICIAL-e400.zip
5b840ab733f432f8a0152260b9e38369  cm-7-20121227-UNOFFICIAL-e400.zip

http://www.multiupload.nl/MMLRI3O6UI

testers welcome

[yayakuya]

hecatae, on 27 December 2012 - 06:59 PM, said:

next

~/android/system/vendor/cyanogen/get-rommanager

then

cd ~/android/system
. build/envsetup.sh
breakfast p350
breakfast mimmi
breakfast robyn
breakfast tass

or any other qvga device, there is no e400 device tree for cm7.2 so you have options of grabbing the e400 device tree from cm9 and dropping it into /devices/lge or modifying an existing device tree.

if you drop cm9 e400 device tree in, you will need to change all wpa supplicant 8 lib references to wpa supplicant 6 lib.

edit alternatively just delete it:

Package complete: /home/hecatae/cm7.2/out/target/product/e400/cm-7-20121227-UNOFFICIAL-e400.zip
5b840ab733f432f8a0152260b9e38369  cm-7-20121227-UNOFFICIAL-e400.zip

http://www.multiupload.nl/MMLRI3O6UI

testers welcome

I'm so appreciate it master, i glad that you disposed to keep this work. but i was broke my Ubuntu couple months ago...
now i just have win xp with dsixda kitchen installed. i was try to port cm7 based on p350 last night, but nothing... same problem with your last update (it won't boot) . i think i'll try this one and i'll let you now if it works...
once again i'd like to say, thanks...

[yayakuya]

no changing.... it still won't boot  

[hecatae]

yayakuya, on 28 December 2012 - 10:07 AM, said:

no changing.... it still won't boot  

same problem here, thinking vmheap was set too high 76mb, so changed to 32mb, I wonder if we can get adb logcat out of it,

new one, ics adreno drivers replaced with gingerbread ones, vmheap set to 32mb

03b8f7c533ad77615ee9c98a3dedf80e  cm-7-20121227-UNOFFICIAL-e400.zip

http://www.multiupload.nl/2ETLQQ7AB3

next job is to disable genlock, as I think only ics needs that and it maybe screwing up the boot of cm7

[yayakuya]

it's same result....
but hey dude, you know what... keep that works and i'll be here for tested any update you done....

[hecatae]

Package complete: /home/hecatae/CyanogenMOD/out/target/product/e400/cm-7-20121230-UNOFFICIAL-e400.zip
e6a30becb58cf9d9dcc9bba099299dcc  cm-7-20121230-UNOFFICIAL-e400.zip

http://www.multiupload.nl/LOJSEPFFB9

[Ygreck]

hecatae, on 30 December 2012 - 06:44 PM, said:

Package complete: /home/hecatae/CyanogenMOD/out/target/product/e400/cm-7-20121230-UNOFFICIAL-e400.zip
e6a30becb58cf9d9dcc9bba099299dcc  cm-7-20121230-UNOFFICIAL-e400.zip

http://www.multiupload.nl/LOJSEPFFB9

sry, doesn't boot

[yayakuya]

same in here.....
keep rocks!!!

[hecatae]

Package complete: /home/hecatae/CyanogenMOD/out/target/product/e400/cm-7-20121230-UNOFFICIAL-e400.zip
18de9bc32808b318087f6bb19d5b1997  cm-7-20121230-UNOFFICIAL-e400.zip

http://www.multiupload.nl/COR3837RHC

[Ygreck]

LG Logo... doesn't boot

[yayakuya]

same result.....

[elxexu98]

plz. work fast! I can't wait for this rom. I love it
luck for the work and thanks for it.

Happy new year

(I'm Spanish, please excuse me for my poor English)

[yayakuya]

we hope so much to Hecatae for this great job....  

[armindojr]

work hard , i need this cm7. GOGOGOGO

[Raixs]

Thanks for your effort
There is a large community of users waiting for this ...
Please do not give up
I'll be here to help in any way ^ ^

[viking_kong]

wow.i can't beleive someone is still working on this.i'll keep an eye on this.go hecatae.our LG L3 would be so greatful if we have cm7.goodluck!

[yayakuya]

someone please help....
when i change updater-script build by dsixda kitchen, it's always give me
aborted installation (0)....??? i try
to port cm7 from another device,
when i add lines for set_perm using
note pad++ or word pad. it's look
like rejected by cwm recovery. if
someone could tell me, i will make
it asap... how about you Hecatae? what programs you use for make the META-INF folder with updater-script instead???
thanks in advance....

--edit--
[solved] i was found it on Google that i have to change the update binary with a new one that working on my phone. anyway, could you guys suggest me what kitchen i have to work for this stuff? coz I'm using old kitchen from my sgs2 and it's seems use MTD partitions. not for our phone that use EMMC partitions to formatted...
thanks again annd sorry for wasting times  

Edited by yayakuya, 07 January 2013 - 01:40 PM.