Guest aig Posted August 7, 2012 Report Share Posted August 7, 2012 i upgraded to huawei ics 4.0.3 found it sluggish followed the instructions to downgrade got it to a stock rom, but possibly earlier than the one I had on my phone when I first backed up the IEMI. Restored IEMI but to no luck as it would not work. I then mistakenly restored it to ICS IEMIE, now phone is stuck in a loop after having wiped itself automatically. Can I do anything to repair it, or am I stuck with an expensive paperweight? thanks. Link to comment Share on other sites More sharing options...
Guest animal666 Posted August 7, 2012 Report Share Posted August 7, 2012 Put a Rom on SD card in dload folder, Pull battery,,,,, replace and powerup with Vol up and Down pressed. You should get the firmware upgrade screen, if you dont try a different SD card. Try a few different Roms if it stops at about 30%.... B926 ICS was the only one i could load. all others stopped at 30%. Good luck Link to comment Share on other sites More sharing options...
Guest dragpyre Posted August 7, 2012 Report Share Posted August 7, 2012 (edited) Put a Rom on SD card in dload folder, Pull battery,,,,, replace and powerup with Vol up and Down pressed. You should get the firmware upgrade screen, if you dont try a different SD card. Try a few different Roms if it stops at about 30%.... B926 ICS was the only one i could load. all others stopped at 30%. Good luck You forgot that he should flash the middle package .app before flashing an older ROM. Thread is here, my friend: http://www.modaco.co...ade-tool-found/ Don't forget to give Kudos for solutions! Edited August 7, 2012 by dragpyre Link to comment Share on other sites More sharing options...
Guest animal666 Posted August 7, 2012 Report Share Posted August 7, 2012 Sorry, didn't include it because i've never found the middle package any use when ive Boot loop'd my phone. Haven't found it any use ever, maybe others have? Have boot loop'd mine 5 times now trying to get away from ICS, I've downgraded a few times, but the phone is always buggy, crashing apps, no wifi and crap phone reception. So i'm stuck on B926 with clockwork mod & the google apps zip package installed, until a newer official rom is out. Link to comment Share on other sites More sharing options...
Guest aig Posted August 12, 2012 Report Share Posted August 12, 2012 Trying this now without middle patch. Will report back shortly. Link to comment Share on other sites More sharing options...
Guest aig Posted August 12, 2012 Report Share Posted August 12, 2012 @Animal666: thanks. It worked. Link to comment Share on other sites More sharing options...
Guest aig Posted August 12, 2012 Report Share Posted August 12, 2012 I think I spoke too soon ........ I can;t root it anymore: install-superrecovery-windows.bat fastboot-windows.exe flash recovery recovery.superrecovery.img sending 'recovery' (5074 KB)... OKAY writing 'recovery'... FAILED (remote: Command not allowed) Link to comment Share on other sites More sharing options...
Guest Davidoff59 Posted August 12, 2012 Report Share Posted August 12, 2012 If you have changed the recovery, just download superuser apk and binary from here and flash in recovery http://androidsu.com/superuser/ Link to comment Share on other sites More sharing options...
Guest Davidoff59 Posted August 12, 2012 Report Share Posted August 12, 2012 sorry got mixed up. There are 2 different root methods, one for gingerbread and one for ics. Link to comment Share on other sites More sharing options...
Guest Davidoff59 Posted August 12, 2012 Report Share Posted August 12, 2012 recovery recovery.img sending 'recovery' (5172 KB)... OKAY writing 'recovery'... FAILED (remote: Command not allowed) Afterwards it reboots. I feel my fastboot can reach the phone, hence the reboot command works. But not sure why its not able to write recovery? (USB debugging is ON) Your bootloader is still locked. You need to unlock it before you can flash a recovery. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now