28 replies to this topic

[GuyOverThere]

mikeioannina, on 10 October 2012 - 04:56 PM, said:

Thanks, I did the corrections but I'm on my laptop now so I can't compile to see if it works

Here, I've uploaded the device files I use for my rom device_zte_mooncake. It has a few modifications here and there but nothing big, the kernel it uses is my own, based on the sources of my github but with different touchscreen driver and it's for racer1 phones (don't know what Carl is compatible with), it boots out of the box so you can check and compare it with what you're using (if Carl is racer2 like then you'll need to change the kernel to boot)

Divinetoaura said:

how to create a proprietary file from my phone and uploaded on github

I'm not sure I follow you, what do you mean exactly?

[mikeioannina]

GuyOverThere, on 11 October 2012 - 12:02 AM, said:

Here, I've uploaded the device files I use for my rom device_zte_mooncake. It has a few modifications here and there but nothing big, the kernel it uses is my own, based on the sources of my github but with different touchscreen driver and it's for racer1 phones (don't know what Carl is compatible with), it boots out of the box so you can check and compare it with what you're using (if Carl is racer2 like then you'll need to change the kernel to boot)

Carl also has two generations as it shipped with 2.1 and later with 2.2. Mine is Gen2. I've built CWM recovery for it too because the ones for Racer didn't work

[Divinetoaura]

GuyOverThere, on 11 October 2012 - 12:02 AM, said:

Here, I've uploaded the device files I use for my rom device_zte_mooncake. It has a few modifications here and there but nothing big, the kernel it uses is my own, based on the sources of my github but with different touchscreen driver and it's for racer1 phones (don't know what Carl is compatible with), it boots out of the box so you can check and compare it with what you're using (if Carl is racer2 like then you'll need to change the kernel to boot)



I'm not sure I follow you, what do you mean exactly?

okay rather difficult indeed,,

[Divinetoaura]

mikeioannina, on 11 October 2012 - 12:47 AM, said:

Carl also has two generations as it shipped with 2.1 and later with 2.2. Mine is Gen2. I've built CWM recovery for it too because the ones for Racer didn't work

Your phone seems similar to phone me

Edited by Divinetoaura, 11 October 2012 - 01:35 AM.

[mikeioannina]

Divinetoaura, on 11 October 2012 - 01:33 AM, said:

Your phone seems similar to phone me

Yes, I'm pretty sure they are the same, V852/Dreamer/Freddo/Carl. They all look exactly the same and the specs are the same except the camera

Edited by mikeioannina, 11 October 2012 - 01:44 AM.

[Divinetoaura]

mikeioannina, on 11 October 2012 - 01:41 AM, said:

Yes, I'm pretty sure they are the same, V852/Dreamer/Freddo/Carl. They all look exactly the same and the specs are the same except the camera

What no proprietary file for zte carl / freddo?

I've been building CM7 on freedo but the problem is still the kernel will not boot

[mikeioannina]

Can you get the kernel config from the stock 2.2 kernel?

Do:

adb pull /proc/config.gz

And attach it here so I can see the differences between mine and yours...

[Divinetoaura]

ok later on I will try and post here

[Divinetoaura]

This is a stock rom zte ori freddo

http://www.mediafire...7hl78ttijqlu4c4

flash through cwm n restore

config.gz original freddo here

http://www.4shared.c...qDP/config.html

Edited by Divinetoaura, 11 October 2012 - 08:37 PM.