[ICS] [REPACK] [4.0.3] B936 U8815 Vodafone OTA release [ROM]
Started by
Dazzozo
, Sep 07 2012 12:21 AM
#161
Posted 07 September 2012 - 10:50 PM
This rom is working brilliantly, fast smooth, no problems - except that I'm not sure if the actual phone signal itself is weaker than in other roms. Is this even possible, as the baseband hasn't changed! Is it just my imagination? My data keeps flicking from the 3G indicator to H, sometimes drops off completely. Like I said, might just be my imagination. Anyone else noticed anything similar?
I'm saving up for a sofa so I can sit in the other room and tweak my phone without my wife nagging... thanks!
#162
Posted 07 September 2012 - 10:51 PM
Hi guys!
I've been reading this thread all day long...
Please correct me on these conclusions I've made so far:
Thanks everyone!
I've been reading this thread all day long...
Please correct me on these conclusions I've made so far:
- It runs better/smoother than B934
- Battery usage is the same if not better
- Has no Vodafone Bloatware/Software on it (?!)
- The boot logo is Vodafone
- Has more available ram.
- Video recording is still down to 640x480 on B936?
Thanks everyone!
#163
Posted 07 September 2012 - 10:51 PM
nsmacd1, on 07 September 2012 - 10:33 PM, said:
I have noticed that my screen locks after a set time and need re-awakening via either pin or password as the 'slide', 'none' and 'pattern' options are disabled by 'Administrator, encryption policy or credential storage' - Anyone know how to fix this as it gets annoying having to enter a PIN/PW every time the screen locks?
I'm saving up for a sofa so I can sit in the other room and tweak my phone without my wife nagging... thanks!
#164
Posted 07 September 2012 - 10:53 PM
its a Vodafone NZ update.Unless you have a stock vodafone nz rom with all stock apps, it will fail and other methods will need to be used.If your coming from a leaked rom or another foreign rom, then it won't be on the version list of applicable updates.
A NZ rom update isn't going to include a check for a UK released rom for example. Its going to see a version number it doesn't recognise and stall.
Try the force update method or other methods already covered in the forum
A NZ rom update isn't going to include a check for a UK released rom for example. Its going to see a version number it doesn't recognise and stall.
Try the force update method or other methods already covered in the forum
#165
Posted 07 September 2012 - 10:53 PM
maninhas, on 07 September 2012 - 10:20 PM, said:
Ive downloaded two times same result dont get it all my updates were by updatte.app and never had problems:wacko:
i dont know why .app doesnt work for you coz i always use .zip via cwm.. mayb you can try it too, for me works flawlessly.. no need to repeat same step with faulty result if you have another option..
#166
Posted 07 September 2012 - 10:56 PM
Little bug I found, on slide to unlock screen, pressing menu unlocks the phone.
#167
Posted 07 September 2012 - 11:17 PM
#168
Posted 07 September 2012 - 11:22 PM
Cobble, on 07 September 2012 - 11:17 PM, said:
Not on my phone.
I have noticed that powering off the phone just puts it into hibernation.
I have noticed that powering off the phone just puts it into hibernation.
it should be above developer settings
Edited by mack_, 07 September 2012 - 11:22 PM.
I was once a noob like you.... until i bricked my G300. ^_^
If i helped you or you just like my topic/post ,give me some rep with the green button
If i helped you or you just like my topic/post ,give me some rep with the green button
#169
Posted 07 September 2012 - 11:28 PM
#170
Posted 07 September 2012 - 11:34 PM
#171
Posted 07 September 2012 - 11:36 PM
Cobble, on 07 September 2012 - 11:34 PM, said:
Settings > Security
No joy there - I only have the PIN & Password options available - All the rest are greyed out and say :-
'Disabled by administrator,encryption policy or credential storage'
Edited by nsmacd1, 07 September 2012 - 11:37 PM.
Currently using:-
#172
Posted 07 September 2012 - 11:37 PM
Well i just updated using the middle package way and it is installing now, not sure if it works without though...plus i have what i think is the vendor.update.app(flashing that next,hopefully it works)
nope the vendor.app failed
oh well
nope the vendor.app failed
oh well
Edited by mack_, 07 September 2012 - 11:50 PM.
I was once a noob like you.... until i bricked my G300. ^_^
If i helped you or you just like my topic/post ,give me some rep with the green button
If i helped you or you just like my topic/post ,give me some rep with the green button
#173
Posted 08 September 2012 - 12:10 AM
I have updated from Official non rooted B934 to this B936 via dload folder.
As I did not have weather widget and system tray shortcuts for wifi, etc after 2.3.6 - 4.0.3 (B934) upgrade, I have flashed vendor file and the shortcuts and weather appeared.
Now, on B936 I have weather widget, but there is no shorctus. I have tried to flash vendor file again, it shows like its installing, but no effects after finish. There are no shortcuts
Can I now without any trouble go back on 934 via dload folder again? or do I need other steps? is there possibility that my IMEI can be deleted? (I dont have rooted device so I did not made backup.)
As I did not have weather widget and system tray shortcuts for wifi, etc after 2.3.6 - 4.0.3 (B934) upgrade, I have flashed vendor file and the shortcuts and weather appeared.
Now, on B936 I have weather widget, but there is no shorctus. I have tried to flash vendor file again, it shows like its installing, but no effects after finish. There are no shortcuts
Can I now without any trouble go back on 934 via dload folder again? or do I need other steps? is there possibility that my IMEI can be deleted? (I dont have rooted device so I did not made backup.)
#174
Posted 08 September 2012 - 01:18 AM
nsmacd1 have you tried removing your pin unlock first under security then do whatever it is you want to do?
#175
Posted 08 September 2012 - 03:25 AM
Is it worthy enough to go from 934 to 936?
#176
Posted 08 September 2012 - 05:01 AM
MiguelPereira, on 07 September 2012 - 10:51 PM, said:
Hi Thanks for pulling the files,want to go back to the std Huawei ani files, have downloaded both files, i guess i just put both files on my sd card then go to cwm and install from sd card 1 then 2 followed by reboot, can anybody advise is my assumption the right way.....
Tried this and says sig verification failed and also tried Sebastian404 splash screen also says sig verification failed
2nd question
I prefer the way messaging shows messages in B892, in that one message shows in green and the other is plain, wifes phone still runs b892 can it be pulled from her phone and reinstall on B936, if so anybody can somebody advise how....thanks
Edited by bryfly, 08 September 2012 - 08:23 AM.
#177
Posted 08 September 2012 - 05:49 AM
#178
Posted 08 September 2012 - 07:35 AM
Andymac1969, on 07 September 2012 - 08:18 PM, said:
I have a problem with the system on my phone (B936) has no space at all, I have installed AdAway, but it cannot install the update files as there is no space at all, I have looked through Rom Toolbox Pro, but cannot really see much to remove.
Any thoughts?
Andrew
Just noticed the Huawei weather app no longer makes any sounds??? Does anyone else's on this ROM
Any thoughts?
Andrew
Just noticed the Huawei weather app no longer makes any sounds??? Does anyone else's on this ROM
I had the same issue, the .apk file included in the NZ update is older...4.0.26, i flashed to the Ascend P1 version 4.0.27 and sounds are back.
I also tried to update the HwCamera.apk but it was unstable and always reverted back to stock 1.0.14 when the app crashed. Ascend P1 is version 1.0.3
#180
Posted 08 September 2012 - 08:59 AM
bryfly, on 08 September 2012 - 05:01 AM, said:
Hi Thanks for pulling the files,want to go back to the std Huawei ani files, have downloaded both files, i guess i just put both files on my sd card then go to cwm and install from sd card 1 then 2 followed by reboot, can anybody advise is my assumption the right way.....
Tried this and says sig verification failed and also tried Sebastian404 splash screen also says sig verification failed
2nd question
I prefer the way messaging shows messages in B892, in that one message shows in green and the other is plain, wifes phone still runs b892 can it be pulled from her phone and reinstall on B936, if so anybody can somebody advise how....thanks
Tried this and says sig verification failed and also tried Sebastian404 splash screen also says sig verification failed
2nd question
I prefer the way messaging shows messages in B892, in that one message shows in green and the other is plain, wifes phone still runs b892 can it be pulled from her phone and reinstall on B936, if so anybody can somebody advise how....thanks
Hi....
I've changed the boot animation on my wife's Vodafone Smart II... All I did was through Root Explorer, search for the files and with /System mounted as R/W, simply swapped the zip's making sure that they were named the same...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users







Sign In
Create Account

Back to top









