215 replies to this topic

[bryfly]

mack_, on 16 September 2012 - 08:59 PM, said:

you need to flash a new version of cwm that has the charging fix
here is  link: http://www.solidfile...m/d/9dae488372/
just flash it in cwm and reboot recovery and you should have the updated version with the charging fix

cheers for that, cured that prob, now the 3 touch buttons at the bottom stay alight for about a minute or two then go into a mad flashing on and off mode, is there a cure for that ???

[mack_]

bryfly, on 16 September 2012 - 09:29 PM, said:

cheers for that, cured that prob, now the 3 touch buttons at the bottom stay alight for about a minute or two then go into a mad flashing on and off mode, is there a cure for that ???

Sadly, i dont think so but it stops after a while anyway

[bryfly]

mack_, on 16 September 2012 - 09:32 PM, said:

Sadly, i dont think so but it stops after a while anyway

ok cheers, didnt seem to have these probs when i was on n/z rom 936, might go back as there doesnt seem to be much diff anyway,, thanks for your help..

[nsmacd1]

dragpyre, on 16 September 2012 - 08:58 PM, said:

Install the apps you want, then clear the cache and data for the 2D Launcher. It might do the whole tutorial thing again, but it alphabetises the apps in the drawer.

It does, but it loses all shortcuts from the home screens too (in my case anyway!) - As I have all screens filled I had to restore it via Titanium backup and this jumbled up the order of the apps again.

Is there any other way to put the apps in alphabetical order that people know of, without using a Launcher program?

Edited by nsmacd1, 16 September 2012 - 09:47 PM.

[bryfly]

bryfly, on 16 September 2012 - 09:29 PM, said:

cheers for that, cured that prob, now the 3 touch buttons at the bottom stay alight for about a minute or two then go into a mad flashing on and off mode, is there a cure for that ???

mack_, on 16 September 2012 - 09:32 PM, said:

Sadly, i dont think so but it stops after a while anyway

bryfly, on 16 September 2012 - 09:34 PM, said:

ok cheers, didnt seem to have these probs when i was on n/z rom 936, might go back as there doesnt seem to be much diff anyway,, thanks for your help..

Went back to 936 and touch buttons lights still erratic, stay alight for about a minute or two then go into a mad flashing on and off, left 20 mins and still did not go out, went back to 940, problem still there,

However noticed when i touch the screen, 3 touch button lights go steady on, remove touch and they flash again, almost like they are in a loop switch off/ switch on, anybody got any ideas or seen a fix????

Edited by bryfly, 17 September 2012 - 08:43 AM.

[Faelon]

Well, I have been using the B940 almost for a day! It seems a bit slower than the NZ B936 rom.

[Dellboy2012]

I had antutu score 3228 with 936, but with 940 only 3085. How come? Is it really slower (personally I can't tell)?

[luismiyu]

Dellboy2012, on 17 September 2012 - 02:00 PM, said:

I had antutu score 3228 with 936, but with 940 only 3085. How come? Is it really slower (personally I can't tell)?

I have 3227 in antutu with B940 and It looks much faster than my old B934.

[Colossae3.23]

All the experts on here say that antutu scores are too variable to give an accurate comparison. One of those variable is that sd card read/write speeds have big impact on the antutu scores.

I flashed omegamoon's kernel and with oc this rom is really quick: -)

[schkinx]

bigbossbols, on 16 September 2012 - 08:45 PM, said:

I updated via update.app. now I cant get any root. anyone got the same problem?

Having the same problem , Cant Root Or install CWM  

[Dellboy2012]

I did it with update.app just following guide for up dwn between ics, gb and jb. If that doesn't help try using tool for rooting linked in the first post of this thread.

[mack_]

schkinx, on 17 September 2012 - 05:01 PM, said:

Having the same problem , Cant Root Or install CWM  

You need to download the unlockbootloader.exe application from the how install ics 4.0.3. Thread and then use that to root and unlock bootloader, next time i would advise just flashing a zip.... It's just easier

[nick_sub]

I also had the wifi problem with this ROM but managed to get it working in the end. This is what I did.

Phone from new - followed the guide for 5 year olds to get to stock vodafone 936 (very good guide by the way).
Followed same guide to install this repacked 940 ROM. Wifi didn't work.
Reflashed ROM In CWM formatted davlik cache, cache and data. Still didn't work.
Formatted davlik, cache, data and SYSTEM then re-flashed ROM in cwm (in that order). Then it worked.

So maybe formatting system before flashing the ROM was the key, or maybe doing the formats before the flashing, or maybe it was just luck!

[fr0do]

I just revisited this. 936 update.app gave me voda-bloat. 936 cwm on top broke wifi, but removed vb. 940 cwm wifi still broke. Wipes > wifi still broke. Wipes > battery pull for 20 secs > wifi back.

940 update app = no voda bloat.

Definitely pulling the battery in between in future.

[Colossae3.23]

I think this rom is a bit "un-sung". I've had no problems with it. I flashed this straight on top of infusion with just a davlik wipe. Then added omegamoon's kernel for oc. Switching wifi on freezes the phone every now and then, but (I'm only guessing) I think it could be cause I had the cpu ramped up to 1.3. I've lowered it to 1.229 and it hasn't happen since.

FYI: Then after installing 940 and the kernel, I decided to flash the Infusion battery mod (ICS) and all the notification toggles came with it! (perhaps this is because I didn't do the full wipe???). There was no settings for them anymore, but I had them as I wanted them anyway. They all worked fine.

[TangerineTractor]

I blasted this last night, and it's working fabulously. Fastest rom to date.

[pOcHa]

Can someone on this version please type this in their chrome chrome://gpu-internals and post the results, thank you...

[fr0do]

pOcHa, on 28 September 2012 - 03:30 PM, said:

Can someone on this version please type this in their chrome chrome://gpu-internals and post the results, thank you...

didn't come pre installed, just in case you thought it did. But sure, I'll do that for ya babes

[fr0do]

Graphics Feature Status
Canvas: Software only, hardware acceleration unavailable
HTML Rendering: Hardware accelerated
3D CSS: Hardware accelerated
WebGL: Unavailable. Hardware acceleration disabled.
WebGL multisampling: Hardware accelerated
Problems Detected
WebGL has been disabled, either via about:flags or command line.
Version Information
Data exported Fri Sep 28 2012 16:41:19 GMT+0100 (BST)
Chrome version 18.0.1025.166 (Official Build 143067)
Operating system Linux 3.0.8-perf-00240-g6df6f4c
Software rendering list version
ANGLE revision 988
2D graphics backend Skia
Performance Information
Graphics 0.0
Gaming 0.0
Overall 0.0
Driver Information
Initialization time 12993320438477
Vendor Id 0x0000
Device Id 0x0000
Optimus false
Driver vendor
Driver version
Driver date
Pixel shader version 1.00
Vertex shader version 1.00
GL version 2.0
GL_VENDOR Qualcomm
GL_RENDERER Adreno ™ 200
GL_VERSION OpenGL ES 2.0 2184622
GL_EXTENSIONS GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture

[fr0do]

^^ This is B940 full upgrade with no strange anomalies after flashing