Jump to content


Photo

blank screen after turn phone off and on.

* * - - - 1 votes

  • Please log in to reply
48 replies to this topic

#21
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
please delete

Edited by plegdroid, 19 October 2012 - 10:07 PM.

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#22
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
evening, I've put skatie rom on and that dosnt require the su command <img src='http://www.modaco.co...DIR#>/smile.png' class='bbc_emoticon' alt=':)' />

hope this has grabbed it early enough <img src='http://www.modaco.co...DIR#>/smile.png' class='bbc_emoticon' alt=':)' />

Edited by plegdroid, 20 October 2012 - 11:45 AM.

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#23
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
please advise if I need to grab earlier still than this ?

with much thanks :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#24
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
Still not enough...
Prepare the command, turn on the phone and execute it. If it gives error about device not present execute immediately again until it catches (keyboard up key will get you last command so you don't need to type it again).

  • 1
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#25
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
And be sure your command prompt has enough scroll buffer set so it doesn't trim the very first lines when output exceeds the buffer
. Or you can redirect output to a file

Edited by C3C0, 20 October 2012 - 05:53 AM.

  • 1
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#26
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4

And be sure your command prompt has enough scroll buffer set so it doesn't trim the very first lines when output exceeds the buffer
. Or you can redirect output to a file


afternoon, please excuse my ignorance, but what would be the code to redirect output to a file? iam able to get it really early, but copy n pasting the output direct from command prompt is now only copying what's on screen and not the part of the log that came before. :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#27
omegavesko

omegavesko

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 1,275 posts
  • Gender:Male
  • Location:Subotica, Serbia
  • Devices:ZTE Skate
  • Twitter:@omegavesko
On Windows, you can just do this:

<command> > filename.txt

  • 1
Posted Image
ZTE Skate // CM7.2 // 2.3.7
ZTE Crescent (P736E) // CM9 // 4.0.4
Alcatel OT-990 // MIUI // 2.3.7 Sold!

#28
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
adb shell cat /proc/kmsg > kmsg.log

To stop output press ctrl+c

Edited by C3C0, 20 October 2012 - 01:01 PM.

  • 1
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#29
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4

On Windows, you can just do this:

<command> > filename.txt

adb shell cat /proc/kmsg > kmsg.log

To stop output press ctrl+c


thank you both :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#30
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
please delete

Edited by plegdroid, 20 October 2012 - 05:03 PM.

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#31
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
Hmm... elitemovil kernel. Could I ask you to flash S2 from "S series " kernel thread and post output again?

  • 0
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#32
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4

Hmm... elitemovil kernel. Could I ask you to flash S2 from "S series " kernel thread and post output again?


will do, was that fast enough? :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#33
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
Yes. Perfect. I can see panel id being set the same as mine.
But I cannot see initialization of Lead lcd panel type so we should use S2 kernel so I can compare better your output with my output.

  • 0
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#34
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4

Yes. Perfect. I can see panel id being set the same as mine.
But I cannot see initialization of Lead lcd panel type so we should use S2 kernel so I can compare better your output with my output.


yay, I hate adb, but got it with " adb wait-for-device && adb shell cat /proc/kmsg > kmsg.log :D

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#35
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
evening, as requested :)



<6>[01-01 00:00:00.000000] [0: swapper]Initializing cgroup subsys cpu
<5>[01-01 00:00:00.000000] [0: swapper]Linux version 2.6.35.7-perf+ (ceco@HP-Linux) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Sep 13 11:22:18 CEST 2012
<4>[01-01 00:00:00.000000] [0: swapper]CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[01-01 00:00:00.000000] [0: swapper]CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[01-01 00:00:00.000000] [0: swapper]Machine: skate
<6>[01-01 00:00:00.000000] [0: swapper][ZYF@FTM]parse_tag_zteftm: zte FTM disable !
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) recovery -- Offset:1cc Size:28
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) boot -- Offset:1f4 Size:28
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) splash -- Offset:21c Size:c
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) misc -- Offset:228 Size:4
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) cache -- Offset:22c Size:28
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) system -- Offset:254 Size:640
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) userdata -- Offset:894 Size:758
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) oem -- Offset:fec Size:8
<6>[01-01 00:00:00.000000] [0: swapper]Partition (from atag) persist -- Offset:ff4 Size:c
<4>[01-01 00:00:00.000000] [0: swapper]Memory policy: ECC disabled, Data cache writeback
<7>[01-01 00:00:00.000000] [0: swapper]On node 0 totalpages: 121344
<7>[01-01 00:00:00.000000] [0: swapper]free_area_init_node: node 0, pgdat 80941a98, node_mem_map 80a0a000
<7>[01-01 00:00:00.000000] [0: swapper] Normal zone: 1460 pages used for memmap
<7>[01-01 00:00:00.000000] [0: swapper] Normal zone: 0 pages reserved
<7>[01-01 00:00:00.000000] [0: swapper] Normal zone: 119884 pages, LIFO batch:31
<6>[01-01 00:00:00.000000] [0: swapper]allocating 28794880 bytes at 81033000 (3633000 physical) for mdp pmem arena
<6>[01-01 00:00:00.000000] [0: swapper]allocating 11997184 bytes at 82ba9000 (51a9000 physical) for adsp pmem arena
<6>[01-01 00:00:00.000000] [0: swapper]allocating 372736 bytes (at 80000 physical) for audio pmem arena
<6>[01-01 00:00:00.000000] [0: swapper]allocating 1536000 bytes at 8371a000 (5d1a000 physical) for fb
<6>[01-01 00:00:00.000000] [0: swapper]allocating 114688 bytes at 83900000 (5f00000 physical) for kernel ebi1 pmem arena
<6>[01-01 00:00:00.000000] [0: swapper]length = 0 ++
<6>[01-01 00:00:00.000000] [0: swapper]length = 0 --
<6>[01-01 00:00:00.000000] [0: swapper]allocating 0 M at 86700000 (8d00000 physical) for F3
<6>[01-01 00:00:00.000000] [0: swapper]L210 cache controller enabled
<1>[01-01 00:00:00.000000] [0: swapper]Initialized strongly ordered page successfully
<4>[01-01 00:00:00.000000] [0: swapper]Built 1 zonelists in Zone order, mobility grouping on. Total pages: 119884
<5>[01-01 00:00:00.000000] [0: swapper]Kernel command line: rdinit=/init console=ttyDCC0 console=ttyMSM2,115200
<6>[01-01 00:00:00.000000] [0: swapper]PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[01-01 00:00:00.000000] [0: swapper]Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[01-01 00:00:00.000000] [0: swapper]Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[01-01 00:00:00.000000] [0: swapper]Memory: 218MB 256MB = 474MB total
<5>[01-01 00:00:00.000000] [0: swapper]Memory: 429264k/429264k available, 56112k reserved, 0K highmem
<5>[01-01 00:00:00.000000] [0: swapper]Virtual kernel memory layout:
<5>[01-01 00:00:00.000000] [0: swapper] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[01-01 00:00:00.000000] [0: swapper] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[01-01 00:00:00.000000] [0: swapper] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[01-01 00:00:00.000000] [0: swapper] vmalloc : 0xae000000 - 0xfa000000 (1216 MB)
<5>[01-01 00:00:00.000000] [0: swapper] lowmem : 0x80000000 - 0xada00000 ( 730 MB)
<5>[01-01 00:00:00.000000] [0: swapper] modules : 0x7f000000 - 0x80000000 ( 16 MB)
<5>[01-01 00:00:00.000000] [0: swapper] .init : 0x80008000 - 0x80033000 ( 172 kB)
<5>[01-01 00:00:00.000000] [0: swapper] .text : 0x80033000 - 0x808c9000 (8792 kB)
<5>[01-01 00:00:00.000000] [0: swapper] .data : 0x808ee000 - 0x80942140 ( 337 kB)
<6>[01-01 00:00:00.000000] [0: swapper]NR_IRQS:261
<4>[01-01 00:00:00.000000] [0: swapper]Console: colour dummy device 80x30
<6>[01-01 00:00:00.000000] [0: swapper]Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
<6>[01-01 00:00:00.060000] [0: swapper]pid_max: default: 32768 minimum: 301
<4>[01-01 00:00:00.060000] [0: swapper]Mount-cache hash table entries: 512
<6>[01-01 00:00:00.060000] [0: swapper]Initializing cgroup subsys cpuacct
<6>[01-01 00:00:00.060000] [0: swapper]Initializing cgroup subsys freezer
<6>[01-01 00:00:00.060000] [0: swapper]Initializing cgroup subsys bfqio
<6>[01-01 00:00:00.060000] [0: swapper]Initializing cgroup subsys timer_slack
<6>[01-01 00:00:00.060000] [0: swapper]CPU: Testing write buffer coherency: ok
<3>[01-01 00:00:00.060000] [1: swapper]pm: create_suspend_sync_work 147: sync in workqueue enable
<6>[01-01 00:00:00.060000] [1: swapper]NET: Registered protocol family 16
<3>[01-01 00:00:00.060000] [1: swapper]smem_find(137, 64): wrong size 56
<6>[01-01 00:00:00.060000] [1: swapper]socinfo_init: v2, id=67, ver=1.5, raw_id=961, raw_ver=5
<6>[01-01 00:00:00.060000] [1: swapper]acpu_clock_init()
<6>[01-01 00:00:00.060000] [1: swapper]Shared PLL control available.
<6>[01-01 00:00:00.060000] [1: swapper]L val: PLL0: 50, PLL1: 12, PLL2: 41
<6>[01-01 00:00:00.060000] [1: swapper]ACPU running at 787200 KHz
<6>[01-01 00:00:00.060000] [1: swapper]Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[01-01 00:00:00.060000] [1: swapper] 0 19200 -1 1 19200 1 30720 -1 -1 -1 5 4 6
<6>[01-01 00:00:00.060000] [1: swapper] 1 120000 0 8 60000 2 61440 -1 -1 -1 7 4 6
<6>[01-01 00:00:00.060000] [1: swapper] 2 122880 1 2 61440 2 61440 1 -1 -1 7 4 6
<6>[01-01 00:00:00.060000] [1: swapper] 3 200000 2 6 66667 3 61440 1 2 -1 7 4 6
<6>[01-01 00:00:00.060000] [1: swapper] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[01-01 00:00:00.060000] [1: swapper] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[01-01 00:00:00.060000] [1: swapper] 6 396800 2 2 198400 2 200000 1 2 3 7 -1 8
<6>[01-01 00:00:00.060000] [1: swapper] 7 480000 0 2 240000 2 200000 1 2 3 -1 -1 12
<6>[01-01 00:00:00.060000] [1: swapper] 8 787200 2 1 262400 3 200000 7 -1 6 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper] 9 806400 2 1 268800 3 200000 7 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]10 825600 2 1 275200 3 200000 7 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]11 844800 2 1 281600 3 200000 7 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]12 864000 2 1 288000 3 200000 7 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]13 883200 2 1 294400 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]14 902400 2 1 300800 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]15 921600 2 1 307200 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]16 940800 2 1 313600 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]17 960000 2 1 320000 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]18 979200 2 1 326400 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]19 998400 2 1 332800 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]20 1017600 2 1 339200 3 200000 -1 -1 8 -1 -1 21
<6>[01-01 00:00:00.060000] [1: swapper]21 1036800 2 1 345600 3 200000 -1 -1 8 -1 -1 -1
<6>[01-01 00:00:00.060000] [1: swapper]19 scaling frequencies supported.
<3>[01-01 00:00:00.060000] [1: swapper]gpio_request: 21 ok!
<4>[01-01 00:00:00.060000] [1: swapper]
<4>[01-01 00:00:00.060000] [1: swapper]stone_20100302 vib00:**************************************
<6>[01-01 00:00:00.060000] [1: swapper]ram_console: got buffer at 2500000, size 100000
<6>[01-01 00:00:00.060000] [1: swapper]ram_console: found existing buffer, size 5225, start 5225
<6>[01-01 00:00:00.060000] [1: swapper]console [ram-1] enabled
<6>[01-01 00:00:00.060000] [1: swapper]hw perfevents: enabled with v6 PMU driver, 3 counters available
<4>[01-01 00:00:00.070000] [1: swapper]bio: create slab <bio-0> at 0
<5>[01-01 00:00:00.070000] [1: swapper]SCSI subsystem initialized
<6>[01-01 00:00:00.070000] [1: swapper]i2c-gpio i2c-gpio.1: using pins 93 (SDA) and 92 (SCL)
<6>[01-01 00:00:00.070000] [1: swapper]i2c-gpio i2c-gpio.2: using pins 109 (SDA) and 107 (SCL)
<6>[01-01 00:00:00.070000] [1: swapper]msm_i2c_probe
<6>[01-01 00:00:00.070000] [1: swapper] Warning: msm on-chip aux i2c bus disabled on Board mooncake!
<6>[01-01 00:00:00.070000] [1: swapper]msm_i2c_probe: clk_ctl 35d, 100000 Hz
<6>[01-01 00:00:00.070000] [1: swapper]Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>[01-01 00:00:00.070000] [1: swapper]Bluetooth: Core ver 2.15
<6>[01-01 00:00:00.070000] [1: swapper]NET: Registered protocol family 31
<6>[01-01 00:00:00.070000] [1: swapper]Bluetooth: HCI device and connection manager initialized
<6>[01-01 00:00:00.070000] [1: swapper]Bluetooth: HCI socket layer initialized
<6>[01-01 00:00:00.070000] [1: swapper]Switching to clocksource dg_timer
<6>[01-01 00:00:00.070000] [1: swapper]NET: Registered protocol family 2
<6>[01-01 00:00:00.070000] [1: swapper]IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[01-01 00:00:00.070000] [1: swapper]TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[01-01 00:00:00.070000] [1: swapper]TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[01-01 00:00:00.070000] [1: swapper]TCP: Hash tables configured (established 16384 bind 16384)
<6>[01-01 00:00:00.070000] [1: swapper]TCP reno registered
<6>[01-01 00:00:00.070000] [1: swapper]UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[01-01 00:00:00.070000] [1: swapper]UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[01-01 00:00:00.070000] [1: swapper]NET: Registered protocol family 1
<6>[01-01 00:00:00.070000] [1: swapper]RPC: Registered udp transport module.
<6>[01-01 00:00:00.070000] [1: swapper]RPC: Registered tcp transport module.
<6>[01-01 00:00:00.070000] [1: swapper]RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[01-01 00:00:00.070000] [1: swapper]Trying to unpack rootfs image as initramfs...
<6>[01-01 00:00:00.100000] [1: swapper]Freeing initrd memory: 200K
<3>[01-01 00:00:00.100000] [16: modem_notifier]Notify: smsm init
<6>[01-01 00:00:00.100000] [1: swapper]SMD Packet Port Driver Initialized.
<6>[01-01 00:00:00.100000] [1: swapper][adsp.c:adsp_init] rs3000000a -- 0
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] Number of decoder supported 5
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] Number of concurrency supported 7
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] queueid:13
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] decid:0
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] nr_codec_support:11
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] queueid:14
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] decid:1
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] nr_codec_support:5
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] queueid:15
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] decid:2
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] nr_codec_support:5
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] queueid:16
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] decid:3
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] nr_codec_support:4
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] queueid:17
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] decid:4
<6>[01-01 00:00:00.100000] [1: swapper][audpp.c:audpp_probe] nr_codec_support:1
<4>[01-01 00:00:00.110000] [1: swapper]pm_monitor_init enter
<6>[01-01 00:00:00.130000] [22: krpcserversd]RPC_TIME_TOD_SET_APPS_BASES:
<6>[01-01 00:00:00.130000] [22: krpcserversd] tick = 71399
<6>[01-01 00:00:00.130000] [22: krpcserversd] stamp = 0
<3>[01-01 00:00:00.130000] [22: krpcserversd]drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[01-01 00:00:00.130000] [1: swapper]ashmem: initialized
<5>[01-01 00:00:00.140000] [1: swapper]Slow work thread pool: Starting up
<5>[01-01 00:00:00.140000] [1: swapper]Slow work thread pool: Ready
<4>[01-01 00:00:00.140000] [1: swapper]yaffs Sep 13 2012 11:20:53 Installing.
<6>[01-01 00:00:00.140000] [1: swapper]msgmni has been set to 838
<6>[01-01 00:00:00.140000] [39: cryptomgr_test]alg: No test for stdrng (krng)
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler noop registered
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler deadline registered
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler cfq registered
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler bfq registered
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler vr registered
<6>[01-01 00:00:00.210000] [1: swapper]io scheduler sio registered (default)
<6>[01-01 00:00:00.210000] [1: swapper]msm_fb_probe: phy_Addr = 0x5d1a000 virt = 0xae400000
<6>[01-01 00:00:00.210000] [1: swapper]MDP HW Base phy_Address = 0xaa200000 virt = 0xae100000
<4>[01-01 00:00:00.210000] [1: swapper]spi_init
<4>[01-01 00:00:00.210000] [1: swapper]!truly id is 0x6904
<4>[01-01 00:00:00.240000] [1: swapper]lead id 0xDA00 is 0x0
<4>[01-01 00:00:00.240000] [1: swapper][ZGC]:init_lcd_proc
<6>[01-01 00:00:00.240000] [1: swapper]lcdc config
<4>[01-01 00:00:00.240000] [1: swapper]spi_init
<4>[01-01 00:00:00.240000] [1: swapper]![ZYF] lcdc_set_bl level=5, 1
<4>[01-01 00:00:00.310000] [1: swapper][LY] send_bkl_address
<4>[01-01 00:00:00.310000] [1: swapper][LY] send_bkl_data
<6>[01-01 00:00:00.310000] [1: swapper]FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!
<4>[01-01 00:00:00.310000] [1: swapper][ZGC]:LcdPanleID = 60
<7>[01-01 00:00:00.310000] [1: swapper]Registered led device: lcd-backlight
<6>[01-01 00:00:00.310000] [1: swapper]msm_serial_hs: Cannot create debugfs dir
<6>[01-01 00:00:00.310000] [1: swapper]msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[01-01 00:00:00.310000] [1: swapper]msm_serial_hs module loaded
<6>[01-01 00:00:00.310000] [1: swapper]brd: module loaded
<6>[01-01 00:00:00.310000] [1: swapper]loop: module loaded
<6>[01-01 00:00:00.310000] [1: swapper]pmem: Initializing pmem_kernel_ebi1 (in-kernel)
<6>[01-01 00:00:00.310000] [1: swapper]pmem: Initializing pmem (user-space) as cached
<6>[01-01 00:00:00.320000] [1: swapper]pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[01-01 00:00:00.320000] [1: swapper]pmem: Initializing pmem_audio (user-space) as non-cached
<6>[01-01 00:00:00.320000] [1: swapper][FM][FYA@FM_SI4708]register fm_si4708 device successful!
<6>[01-01 00:00:00.320000] [1: swapper][FM][FYA@FM_SI4708]fm_si4708 add driver successful
<6>[01-01 00:00:00.320000] [1: swapper]SCSI Media Changer driver v0.25
<6>[01-01 00:00:00.320000] [1: swapper]msm_nand_probe: phys addr 0xa0a00000
<6>[01-01 00:00:00.320000] [1: swapper]msm_nand_probe: dmac 0x7
<6>[01-01 00:00:00.320000] [1: swapper]msm_nand_probe: allocated dma buffer at ffc0f000, dma_addr 2ff32000
<6>[01-01 00:00:00.320000] [1: swapper]ONFI probe : Found a nonONFI Compliant device
<6>[01-01 00:00:00.320000] [1: swapper]status: c00020
<6>[01-01 00:00:00.320000] [1: swapper]nandid: 5500bcec maker ec device bc
<6>[01-01 00:00:00.320000] [1: swapper]Found a supported NAND device
<6>[01-01 00:00:00.320000] [1: swapper]NAND Id : 0x5500bcec
<6>[01-01 00:00:00.320000] [1: swapper]Buswidth : 16 Bits
<6>[01-01 00:00:00.320000] [1: swapper]Density : 512 MByte
<6>[01-01 00:00:00.320000] [1: swapper]Pagesize : 2048 Bytes
<6>[01-01 00:00:00.320000] [1: swapper]Erasesize: 131072 Bytes
<6>[01-01 00:00:00.320000] [1: swapper]Oobsize : 64 Bytes
<6>[01-01 00:00:00.320000] [1: swapper]CFG0 Init : 0xa85408c0
<6>[01-01 00:00:00.320000] [1: swapper]CFG1 Init : 0x0004745e
<6>[01-01 00:00:00.320000] [1: swapper]ECCBUFCFG : 0x00000203
<5>[01-01 00:00:00.320000] [1: swapper]Creating 9 MTD partitions on "msm_nand":
<5>[01-01 00:00:00.320000] [1: swapper]0x000003980000-0x000003e80000 : "recovery"
<5>[01-01 00:00:00.320000] [1: swapper]0x000003e80000-0x000004380000 : "boot"
<5>[01-01 00:00:00.330000] [1: swapper]0x000004380000-0x000004500000 : "splash"
<5>[01-01 00:00:00.330000] [1: swapper]0x000004500000-0x000004580000 : "misc"
<5>[01-01 00:00:00.330000] [1: swapper]0x000004580000-0x000004a80000 : "cache"
<5>[01-01 00:00:00.330000] [1: swapper]0x000004a80000-0x000011280000 : "system"
<5>[01-01 00:00:00.440000] [1: swapper]0x000011280000-0x00001fd80000 : "userdata"
<5>[01-01 00:00:00.570000] [1: swapper]0x00001fd80000-0x00001fe80000 : "oem"
<5>[01-01 00:00:00.570000] [1: swapper]0x00001fe80000-0x000020000000 : "persist"
<6>[01-01 00:00:00.570000] [1: swapper]PPP generic driver version 2.4.2
<6>[01-01 00:00:00.570000] [1: swapper]PPP Deflate Compression module registered
<6>[01-01 00:00:00.570000] [1: swapper]PPP BSD Compression module registered
<6>[01-01 00:00:00.570000] [1: swapper]PPP MPPE Compression module registered
<6>[01-01 00:00:00.570000] [1: swapper]NET: Registered protocol family 24
<6>[01-01 00:00:00.570000] [1: swapper]SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[01-01 00:00:00.570000] [1: swapper]CSLIP: code copyright 1989 Regents of the University of California.
<6>[01-01 00:00:00.570000] [1: swapper]tun: Universal TUN/TAP device driver, 1.6
<6>[01-01 00:00:00.570000] [1: swapper]tun: © 1999-2004 Max Krasnyansky <[email protected]>
<4>[01-01 00:00:00.580000] [1: swapper]smc91x: not found (-19).
<4>[01-01 00:00:00.580000] [1: swapper]rmnet_init
<6>[01-01 00:00:00.580000] [1: swapper]msm_otg_probe: rpc_connect(0)
<6>[01-01 00:00:00.580000] [1: swapper]__msm_rpc_connect: server not found 30000060:20001
<6>[01-01 00:00:00.580000] [1: swapper]msm_hsusb_ldo_enable: 1
<6>[01-01 00:00:00.580000] [1: swapper]__msm_rpc_connect: server not found 3000001a:30001
<6>[01-01 00:00:00.580000] [1: swapper]__msm_rpc_connect: server not found 3000001a:20001
<6>[01-01 00:00:00.580000] [1: swapper]peripheral driver registered w/ tranceiver
<3>[01-01 00:00:00.580000] [1: swapper]android init
<6>[01-01 00:00:00.580000] [1: swapper]android_probe pdata: 80904358
<4>[01-01 00:00:00.580000] [1: swapper]usb: config_ftm_from_tag, 323
<4>[01-01 00:00:00.580000] [1: swapper]usb: config_ftm_from_tag, 331: ftm_mode disable
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 usb_mass_storage
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 diag
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 modem
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 nmea
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 at
<6>[01-01 00:00:00.580000] [1: swapper]f_adb init
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 adb
<6>[01-01 00:00:00.580000] [1: swapper]f_rndis init
<3>[01-01 00:00:00.580000] [1: swapper]register_android_function 944 rndis
<6>[01-01 00:00:00.580000] [1: swapper]diagfwd initializing ..
<6>[01-01 00:00:00.580000] [1: swapper]diag opened SMD port ; r = 0
<6>[01-01 00:00:00.580000] [1: swapper]diagchar initializing ..
<6>[01-01 00:00:00.580000] [1: swapper]diagchar initialized
<6>[01-01 00:00:00.720000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: idle flags 0x2
<6>[01-01 00:00:00.840000] [1: swapper]function_number=0x34, query_base=0x8a, cmd_base=0x0, ctrl_base=0x0, data_base=0x0, intr_src_count=0x1
<6>[01-01 00:00:00.840000] [1: swapper]function_number=0x1, query_base=0x93, cmd_base=0x88, ctrl_base=0x35, data_base=0x13, intr_src_count=0x1
<6>[01-01 00:00:00.840000] [1: swapper]function_number=0x11, query_base=0xa8, cmd_base=0x89, ctrl_base=0x37, data_base=0x15, intr_src_count=0x1
<6>[01-01 00:00:00.840000] [1: swapper]synaptics_rmi4_get_pdt: max_x=1143, max_y=1892
<6>[01-01 00:00:00.840000] [1: swapper]synaptics_ts:5, points_supported=5
<6>[01-01 00:00:00.840000] [1: swapper]function_number=0x0, query_base=0x0, cmd_base=0x0, ctrl_base=0x0, data_base=0x0, intr_src_count=0x0
<6>[01-01 00:00:00.840000] [1: swapper]synaptics_rmi4_get_pdt: data_base=0x13, data_len=33
<6>[01-01 00:00:00.850000] [1: swapper]Synaptics: Manufacturer : synaptics_rmi4_get_pdt
<6>[01-01 00:00:00.850000] [1: swapper]synaptics_rmi4_get_pdt: Product ID : TM1792-001
<6>[01-01 00:00:00.850000] [1: swapper]synaptics_rmi4_get_pdt: Firmware Revision : 0x4
<4>[01-01 00:00:00.850000] [1: swapper]synaptics_rmi4_probe: max_x=1143 max_y=1863
<4>[01-01 00:00:00.850000] [1: swapper]xres=480, yres=800
<6>[01-01 00:00:00.850000] [1: swapper]input: synaptics-rmi4-ts as /devices/virtual/input/input0
<6>[01-01 00:00:00.850000] [1: swapper]Received IRQ!
<4>[01-01 00:00:00.850000] [1: swapper]syna_fwupdate_init, xiayc: client=ad670ba0 syna_i2c_client=ad670ba0
<6>[01-01 00:00:00.850000] [1: swapper]syna_fwupdate_init:fts firmware update init succeed!
<6>[01-01 00:00:00.850000] [1: swapper]synaptics_rmi4_probe: Start ts synaptics-rmi4-ts in interrupt mode
<6>[01-01 00:00:00.850000] [1: swapper]atmel_ts_init():
<3>[01-01 00:00:01.060000] [1: swapper]atmel_ts_probe: unable to request gpio 29 (-16)
<4>[01-01 00:00:01.060000] [1: swapper]atmel_qt602240: probe of 0-004a failed with error -16
<3>[01-01 00:00:01.320000] [1: swapper]msm_i2c msm_i2c.0: (007c) Error during data xfer (-5)
<3>[01-01 00:00:01.340000] [1: swapper]msm_i2c msm_i2c.0: (007c) Error during data xfer (-5)
<3>[01-01 00:00:01.360000] [1: swapper]msm_i2c msm_i2c.0: (007c) Error during data xfer (-5)
<4>[01-01 00:00:01.379999] [1: swapper]wly: focaltech touch is not exsit.
<6>[01-01 00:00:01.379999] [1: swapper]GPIO Matrix Keypad Driver: Start keypad matrix for skate_keypad in interrupt mode
<6>[01-01 00:00:01.379999] [1: swapper]input: skate_keypad as /devices/virtual/input/input1
<7>[01-01 00:00:01.379999] [1: swapper]RTC Registering with rs30000048
<3>[01-01 00:00:01.379999] [1: swapper]msm_rpc_client_req: RPC call was not successful (3)
<7>[01-01 00:00:01.379999] [1: swapper]msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>[01-01 00:00:01.379999] [1: swapper]rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
<6>[01-01 00:00:01.379999] [1: swapper]using rtc device, msm_rtc, for alarms
<7>[01-01 00:00:01.379999] [1: swapper]msm_rtc: dev (254:0)
<6>[01-01 00:00:01.379999] [1: swapper]rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
<7>[01-01 00:00:01.379999] [1: swapper]msm_rtc_secure: dev (254:1)
<6>[01-01 00:00:01.379999] [1: swapper]rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
<6>[01-01 00:00:01.379999] [1: swapper]i2c /dev entries driver
<6>[01-01 00:00:01.379999] [1: swapper]AKM8962 compass driver: initialize
<6>[01-01 00:00:01.379999] [1: swapper]akm8962_init: akmd_device register success
<6>[01-01 00:00:01.379999] [1: swapper]akm8962_init: akm_aot_device register success
<6>[01-01 00:00:01.379999] [1: swapper]akm8962_probe is starting in akm8962_probe
<6>[01-01 00:00:01.379999] [1: swapper]AKM8962 akm8962_probe: Success to allocate input device
<6>[01-01 00:00:01.379999] [1: swapper]input: compass as /devices/virtual/input/input2
<6>[01-01 00:00:01.379999] [1: swapper]AKM8962 akm8962_probe: Register input device success
<6>[01-01 00:00:01.379999] [1: swapper]AKM8962 successfully probed.
<6>[01-01 00:00:01.379999] [1: swapper][@gsensor]G-sensor driver: init
<4>[01-01 00:00:01.379999] [1: swapper][gsensor]Start to debug gsensor driver in adxl34x_i2c_probe
<3>[01-01 00:00:01.379999] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.379999] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.389999] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.389999] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.389999] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.399999] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.399999] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.399999] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.399999] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.410000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.410000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.410000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.410000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.420000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.420000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.420000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.420000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.430000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.430000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.430000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.430000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.440000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<4>[01-01 00:00:01.440000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read: retry over 10
<3>[01-01 00:00:01.440000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read chipid fail in adxl34x_i2c_probe,ret = -5
<3>[01-01 00:00:01.440000] [1: swapper][adxl34x@gsensor]Cheackout chipid failed!
<3>[01-01 00:00:01.440000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.440000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.440000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.450000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.450000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.450000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.450000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.460000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.460000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.460000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.460000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.470000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.470000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.470000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.470000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.480000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.480000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.480000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.480000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.490000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<3>[01-01 00:00:01.490000] [1: swapper]msm_i2c msm_i2c.0: (00a6) Error during data xfer (-5)
<4>[01-01 00:00:01.490000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read-->i2c_transfer ret = -5
<4>[01-01 00:00:01.490000] [1: swapper][adxl34x@gsensor]adxl34x_i2c_read: retry over 10
<4>[01-01 00:00:01.490000] [1: swapper][adxl34x@gsensor]i2c read chipid fail,ret = -5
<4>[01-01 00:00:01.490000] [1: swapper][adxl34x@gsensor]Read revid = 0 ,Failed to probe
<4>[01-01 00:00:01.490000] [1: swapper]adxl34x: probe of 0-0053 failed with error -12
<3>[01-01 00:00:01.490000] [1: swapper]ONA: comes into ONA_init
<3>[01-01 00:00:01.490000] [1: swapper]ISL: comes into ISL_init
<3>[01-01 00:00:01.530000] [1: swapper]ISL: chip id of isl29026 that was read matches expected id in ISL_probe()
<3>[01-01 00:00:01.530000] [1: swapper]ISL: i2c_smbus_write_byte() to control reg failed in ISL_probe()
<4>[01-01 00:00:01.530000] [1: swapper]isl29026: probe of 1-0045 failed with error 1
<3>[01-01 00:00:01.530000] [1: swapper]TAOS: comes into taos_init
<3>[01-01 00:00:01.640000] [1: swapper]TAOS: taos_device_name is 1
<3>[01-01 00:00:01.640000] [1: swapper]TAOS: chip id of taos that was read matches expected id in taos_probe()
<2>[01-01 00:00:01.650000] [1: swapper]taos use gpio 42
<6>[01-01 00:00:01.650000] [1: swapper]input: light as /devices/virtual/input/input3
<6>[01-01 00:00:01.650000] [1: swapper]input: proximity as /devices/virtual/input/input4
<6>[01-01 00:00:01.650000] [1: swapper][hp@gsensor]:lis302dl G-sensor driver: init
<6>[01-01 00:00:01.650000] [1: swapper][hp@gsensor]:device id is 59
<3>[01-01 00:00:01.650000] [1: swapper][hp@gsensor]:lis302dl_probe: lis302dl_device register OK
<6>[01-01 00:00:01.650000] [1: swapper]IR NEC protocol handler initialized
<6>[01-01 00:00:01.650000] [1: swapper]IR RC5(x) protocol handler initialized
<6>[01-01 00:00:01.650000] [1: swapper]IR RC6 protocol handler initialized
<6>[01-01 00:00:01.650000] [1: swapper]IR JVC protocol handler initialized
<6>[01-01 00:00:01.650000] [1: swapper]IR Sony protocol handler initialized
<6>[01-01 00:00:01.650000] [1: swapper]Linux video capture interface: v2.00
<4>[01-01 00:00:01.670000] [1: swapper]zt debug: ov5640_init
<6>[01-01 00:00:01.670000] [1: swapper]device-mapper: uevent: version 1.0.3
<6>[01-01 00:00:01.670000] [1: swapper]device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[01-01 00:00:01.680000] [1: swapper]device-mapper: multipath: version 1.1.1 loaded
<6>[01-01 00:00:01.680000] [1: swapper]device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[01-01 00:00:01.680000] [1: swapper]device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[01-01 00:00:01.680000] [1: swapper]device-mapper: multipath service-time: version 0.2.0 loaded
<6>[01-01 00:00:01.680000] [1: swapper]device-mapper: dm-log-userspace: version 1.0.0 loaded
<6>[01-01 00:00:01.680000] [1: swapper]Bluetooth: HCI UART driver ver 2.2
<6>[01-01 00:00:01.680000] [1: swapper]Bluetooth: HCI H4 protocol initialized
<6>[01-01 00:00:01.680000] [1: swapper]Bluetooth: HCI BCSP protocol initialized
<6>[01-01 00:00:01.680000] [1: swapper]Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[01-01 00:00:01.680000] [1: swapper]Bluetooth: BCM Sleep Mode Driver Ver 1.1
<7>[01-01 00:00:01.680000] [1: swapper]bcm_power_init
<7>[01-01 00:00:01.680000] [1: swapper]bcm_power_probe
<6>[01-01 00:00:01.690000] [1: swapper][imoseyon] interactiveX enter
<6>[01-01 00:00:01.700000] [1: swapper]cpuidle: using governor ladder
<6>[01-01 00:00:01.700000] [1: swapper]cpuidle: using governor menu
<3>[01-01 00:00:01.700000] [1: swapper]mmc0: No card detect facilities available
<4>[01-01 00:00:01.700000] [1: swapper]shaohua add check host ad986800
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: 8 bit data mode disabled
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: 4 bit data mode enabled
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: polling status mode enabled
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: Slot eject status = 0
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: Power save feature enable = 1
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: DM non-cached buffer at ffc13000, dma_addr 0x2ffbb000
<6>[01-01 00:00:01.700000] [1: swapper]mmc0: DM cmd busaddr 0x2ffbb000, cmdptr busaddr 0x2ffbb300
<3>[01-01 00:00:01.710000] [1: swapper]mmc1: No card detect facilities available
<4>[01-01 00:00:01.710000] [1: swapper]select_sdio_host: sdio_host assigned. (ad986400)
<4>[01-01 00:00:01.710000] [1: swapper]shaohua add check host ad986400
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: 8 bit data mode disabled
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: 4 bit data mode enabled
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: polling status mode disabled
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: Slot eject status = 0
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: Power save feature enable = 1
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: DM non-cached buffer at ffc14000, dma_addr 0x2ffe4000
<6>[01-01 00:00:01.710000] [1: swapper]mmc1: DM cmd busaddr 0x2ffe4000, cmdptr busaddr 0x2ffe4300
<7>[01-01 00:00:01.710000] [1: swapper]Registered led device: button-backlight
<7>[01-01 00:00:01.710000] [1: swapper]Registered led device: red
<7>[01-01 00:00:01.710000] [1: swapper]Registered led device: green
<6>[01-01 00:00:01.710000] [1: swapper]__msm_rpc_connect: server not found 30000061:30001
<6>[01-01 00:00:01.710000] [1: swapper]__msm_rpc_connect: server not found 30000061:20001
<6>[01-01 00:00:01.730000] [1: swapper]logger: created 64K log 'log_main'
<6>[01-01 00:00:01.730000] [1: swapper]logger: created 256K log 'log_events'
<6>[01-01 00:00:01.730000] [1: swapper]logger: created 64K log 'log_radio'
<6>[01-01 00:00:01.730000] [1: swapper]logger: created 64K log 'log_system'
<6>[01-01 00:00:01.730000] [1: swapper]zram: Creating 1 devices ...
<4>[01-01 00:00:01.730000] [1: swapper]No device for DAI CODEC_DAI
<4>[01-01 00:00:01.730000] [1: swapper]No device for DAI CPU_DAI
<3>[01-01 00:00:01.730000] [1: swapper]msm_soc: create pcms
<6>[01-01 00:00:01.730000] [1: swapper]asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[01-01 00:00:01.730000] [1: swapper]msm_soc: ALSA MSM Mixer Setting
<6>[01-01 00:00:01.730000] [1: swapper]ALSA device list:
<6>[01-01 00:00:01.730000] [1: swapper] #0: msm-audio (MSM-CARD)
<6>[01-01 00:00:01.730000] [1: swapper]u32 classifier
<6>[01-01 00:00:01.730000] [1: swapper]Netfilter messages via NETLINK v0.30.
<6>[01-01 00:00:01.730000] [1: swapper]nf_conntrack version 0.5.0 (6710 buckets, 26840 max)
<6>[01-01 00:00:01.730000] [1: swapper]ctnetlink v0.93: registering with nfnetlink.
<6>[01-01 00:00:01.730000] [1: swapper]xt_time: kernel timezone is -0000
<6>[01-01 00:00:01.730000] [1: swapper]IPv4 over IPv4 tunneling driver
<6>[01-01 00:00:01.730000] [1: swapper]GRE over IPv4 tunneling driver
<6>[01-01 00:00:01.730000] [1: swapper]ip_tables: © 2000-2006 Netfilter Core Team
<6>[01-01 00:00:01.730000] [1: swapper]arp_tables: © 2002 David S. Miller
<6>[01-01 00:00:01.730000] [1: swapper]TCP cubic registered
<6>[01-01 00:00:01.730000] [1: swapper]NET: Registered protocol family 10
<6>[01-01 00:00:01.730000] [1: swapper]lo: Disabled Privacy Extensions
<6>[01-01 00:00:01.730000] [1: swapper]tunl0: Disabled Privacy Extensions
<6>[01-01 00:00:01.730000] [1: swapper]Mobile IPv6
<6>[01-01 00:00:01.730000] [1: swapper]ip6_tables: © 2000-2006 Netfilter Core Team
<6>[01-01 00:00:01.730000] [1: swapper]IPv6 over IPv4 tunneling driver
<6>[01-01 00:00:01.730000] [1: swapper]sit0: Disabled Privacy Extensions
<6>[01-01 00:00:01.730000] [1: swapper]ip6tnl0: Disabled Privacy Extensions
<6>[01-01 00:00:01.730000] [1: swapper]NET: Registered protocol family 17
<6>[01-01 00:00:01.730000] [1: swapper]NET: Registered protocol family 15
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: L2CAP ver 2.14
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: L2CAP socket layer initialized
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: SCO (Voice Link) ver 0.6
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: SCO socket layer initialized
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: RFCOMM TTY layer initialized
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: RFCOMM socket layer initialized
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: RFCOMM ver 1.11
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: BNEP filters: protocol multicast
<6>[01-01 00:00:01.740000] [1: swapper]Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[01-01 00:00:01.740000] [1: swapper]input: 7k_handset as /devices/virtual/input/input5
<6>[01-01 00:00:01.740000] [1: swapper]__msm_rpc_connect: server not found 30000091:30001
<3>[01-01 00:00:01.750000] [89: khsclntd]--keycode from A9(charger)
<3>[01-01 00:00:01.750000] [89: khsclntd] key:143 keycode:121
<4>[01-01 00:00:01.750000] [89: khsclntd]No pity! update battery event
<3>[01-01 00:00:01.750000] [89: khsclntd]--keycode from A9(charger)
<3>[01-01 00:00:01.750000] [89: khsclntd] key:143 keycode:255
<4>[01-01 00:00:01.750000] [89: khsclntd]No pity! update battery event
<3>[01-01 00:00:01.750000] [89: khsclntd]--keycode from A9(charger)
<3>[01-01 00:00:01.750000] [89: khsclntd] key:143 keycode:120
<4>[01-01 00:00:01.750000] [89: khsclntd]No pity! update battery event
<3>[01-01 00:00:01.750000] [89: khsclntd]--keycode from A9(charger)
<3>[01-01 00:00:01.750000] [89: khsclntd] key:143 keycode:255
<4>[01-01 00:00:01.750000] [89: khsclntd]No pity! update battery event
<3>[01-01 00:00:01.750000] [1: swapper]msm_rpc_client_req: RPC call was not successful (4)
<3>[01-01 00:00:01.750000] [1: swapper]hs_rpc_cb_init: RPC client request failed for pwr key delay cmd, using normal mode
<6>[01-01 00:00:01.750000] [1: swapper]VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<7>[01-01 00:00:01.760000] [1: swapper]msmrtc_tod_proc_result: 10/20/2012 16:53:04 (05)
<6>[10-20 16:53:04.500000] [1: swapper]rs30000048 rs30000048.65536: setting system clock to 2012-10-20 16:53:04 UTC (1350751984)
<6>[10-20 16:53:04.500000] [1: swapper]msm_v4l2: msm_v4l2_init
<4>[10-20 16:53:04.500000] [1: swapper]Warning: unable to open an initial console.
<6>[10-20 16:53:04.500000] [1: swapper]Freeing init memory: 172K
<3>[10-20 16:53:04.500000] [1: init]init: /init.skate.rc: 231: ignored duplicate definition of service 'qmuxd'
<3>[10-20 16:53:04.500000] [1: init]init: /init.skate.rc: 315: ignored duplicate definition of service 'usbconfig'
<3>[10-20 16:53:04.500000] [1: init]init: /init.skate.rc: 359: invalid command '/system/bin/log'
<3>[10-20 16:53:04.500000] [1: init]init: slf2012_001 bootmode=
<4>[10-20 16:53:04.660000] [13: kmmcd]mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[10-20 16:53:04.660000] [13: kmmcd]mmc0: new SDHC card at address e624
<6>[10-20 16:53:04.670000] [13: kmmcd]mmcblk0: mmc0:e624 SU08G 7.40 GiB
<6>[10-20 16:53:04.670000] [13: kmmcd] mmcblk0: p1 p2 p3
<3>[10-20 16:53:04.740000] [1: init]init: load_565rle_image
<6>[10-20 16:53:04.830000] [1: init]yaffs: dev is 32505861 name is "mtdblock5"
<6>[10-20 16:53:04.830000] [1: init]yaffs: passed flags ""
<4>[10-20 16:53:04.830000] [1: init]yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[10-20 16:53:04.880000] [1: init]yaffs: restored from checkpoint
<4>[10-20 16:53:04.880000] [1: init]yaffs_read_super: isCheckpointed 1
<6>[10-20 16:53:04.890000] [1: init]yaffs: dev is 32505862 name is "mtdblock6"
<6>[10-20 16:53:04.890000] [1: init]yaffs: passed flags ""
<4>[10-20 16:53:04.890000] [1: init]yaffs: Attempting MTD mount on 31.6, "mtdblock6"
<4>[10-20 16:53:05.110000] [1: init]block 636 is bad
<4>[10-20 16:53:05.210000] [1: init]block 1387 is bad
<3>[10-20 16:53:05.480000] [69: mt9p111_wq]msm_i2c msm_i2c.0: (007a) Error during data xfer (-5)
<3>[10-20 16:53:05.490000] [69: mt9p111_wq]mt9p111_workqueue: rc != -ENOINIT
<3>[10-20 16:53:06.180000] [71: ov5640_wq]ov5640_sensor_dev_probe: entry
<3>[10-20 16:53:06.190000] [70: ov5642_wq]__ov5642_probe_internal: rc != -ENOINIT
<3>[10-20 16:53:06.870000] [71: ov5640_wq]zt debug: ov5640_sensor_dev_probe : model_id 5640
<4>[10-20 16:53:06.870000] [71: ov5640_wq]zt debug: ov5640_sensor_probe_init
<3>[10-20 16:53:06.870000] [71: ov5640_wq]ov5640_sensor_dev_probe: entry
<3>[10-20 16:53:07.570000] [71: ov5640_wq]zt debug: ov5640_sensor_dev_probe : model_id 5640
<4>[10-20 16:53:07.570000] [71: ov5640_wq]zt debug: ov5640_reg_init
<4>[10-20 16:53:08.560000] [1: init]yaffs_read_super: isCheckpointed 0
<6>[10-20 16:53:08.560000] [1: init]yaffs: dev is 32505860 name is "mtdblock4"
<6>[10-20 16:53:08.560000] [1: init]yaffs: passed flags ""
<4>[10-20 16:53:08.560000] [1: init]yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>[10-20 16:53:08.590000] [1: init]yaffs_read_super: isCheckpointed 0
<4>[10-20 16:53:08.700000] [1: init]save exit: isCheckpointed 1
<4>[10-20 16:53:08.820000] [95: usbconfig]usb: config_pid_from_nv, 309
<4>[10-20 16:53:08.820000] [95: usbconfig]======return value=100
<4>[10-20 16:53:08.820000] [95: usbconfig]
<3>[10-20 16:53:08.820000] [95: usbconfig]msm_hsusb_get_set_usb_conf_nv_value: rpc call success
<3>[10-20 16:53:08.830000] [95: usbconfig]usb: linux_pid value=0x1354
<3>[10-20 16:53:08.830000] [95: usbconfig]usb: switch_pid value=0x1354
<6>[10-20 16:53:08.830000] [95: usbconfig]msm_hsusb_store_enable_cdrom: Requested enable_cdrom = 0 0x0
<3>[10-20 16:53:08.830000] [95: usbconfig]got val = 0x83
<3>[10-20 16:53:08.830000] [95: usbconfig]pid is 131
<3>[10-20 16:53:08.830000] [95: usbconfig]android_set_bind_functions: product id = 83 num functions = 1 curr pid 0x83
<3>[10-20 16:53:08.830000] [95: usbconfig]android_switch_composition: 1357: composite unregister
<3>[10-20 16:53:08.830000] [95: usbconfig]android_switch_composition: 1362: composite register
<3>[10-20 16:53:08.830000] [95: usbconfig] usb_gadget_register_driver 2671
<3>[10-20 16:53:08.830000] [95: usbconfig] usb_gadget_register_driver 2695
<6>[10-20 16:53:08.840000] [95: usbconfig]android_bind
<3>[10-20 16:53:08.840000] [95: usbconfig]device_desc.product_id = 83
<3>[10-20 16:53:08.840000] [95: usbconfig]_android_dev.product_id = 83
<4>[10-20 16:53:08.840000] [95: usbconfig]android_usb gadget: using random self ethernet address
<4>[10-20 16:53:08.840000] [95: usbconfig]android_usb gadget: using random host ethernet address
<3>[10-20 16:53:08.840000] [1: init]init: cannot find '/system/bin/DrmHost', disabling 'DrmHost'
<6>[10-20 16:53:08.850000] [95: usbconfig]usb0: MAC 2e:4c:4d:ec:22:a3
<6>[10-20 16:53:08.850000] [95: usbconfig]usb0: HOST MAC 3a:a9:d7:67:16:fd
<7>[10-20 16:53:08.850000] [95: usbconfig]android_bind_config
<3>[10-20 16:53:08.850000] [95: usbconfig]function usb_mass_storage in bind_functions
<6>[10-20 16:53:08.850000] [95: usbconfig]android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[10-20 16:53:08.850000] [95: usbconfig]android_usb gadget: Number of LUNs=2
<6>[10-20 16:53:08.850000] [95: usbconfig] lun0: LUN: removable file: (no medium)
<6>[10-20 16:53:08.850000] [95: usbconfig] lun1: LUN: removable read only CD-ROM file: (no medium)
<6>[10-20 16:53:08.860000] [95: usbconfig]android_usb gadget: android_usb ready
<6>[10-20 16:53:08.860000] [95: usbconfig]msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
<3>[10-20 16:53:08.860000] [95: usbconfig] usb_gadget_register_driver 2731
<6>[10-20 16:53:08.860000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: idle flags 0x1
<6>[10-20 16:53:08.860000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
<3>[10-20 16:53:08.880000] [1: init]init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[10-20 16:53:08.890000] [1: init]init: cannot find '/system/bin/recEvent', disabling 'dbgar6003'
<3>[10-20 16:53:08.890000] [1: init]init: cannot find '/system/bin/iqmsd', disabling 'iqmsd'
<3>[10-20 16:53:08.900000] [1: init]init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
<3>[10-20 16:53:08.930000] [1: init]init: service 'console' requires console
<6>[10-20 16:53:08.940000] [114: adbd]enabling adb
<3>[10-20 16:53:08.940000] [114: adbd]android_set_bind_functions: product id = 83 num functions = 1 curr pid 0x83
<3>[10-20 16:53:08.940000] [114: adbd]android_switch_composition: 1357: composite unregister
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x42
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: ONLINE -> STOP
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: stop flags 0x2
<6>[10-20 16:53:08.990000] [114: adbd]usb: android_unbind 1240 unbind
<3>[10-20 16:53:08.990000] [114: adbd]usb: android_unbind 1245 unbind usb_mass_storage
<3>[10-20 16:53:08.990000] [114: adbd]unregistered gadget driver 'android_usb'
<3>[10-20 16:53:08.990000] [114: adbd]android_switch_composition: 1362: composite register
<3>[10-20 16:53:08.990000] [114: adbd] usb_gadget_register_driver 2671
<3>[10-20 16:53:08.990000] [114: adbd] usb_gadget_register_driver 2695
<6>[10-20 16:53:08.990000] [114: adbd]android_bind
<3>[10-20 16:53:08.990000] [114: adbd]device_desc.product_id = 83
<3>[10-20 16:53:08.990000] [114: adbd]_android_dev.product_id = 83
<7>[10-20 16:53:08.990000] [114: adbd]android_bind_config
<3>[10-20 16:53:08.990000] [114: adbd]function usb_mass_storage in bind_functions
<6>[10-20 16:53:08.990000] [114: adbd]android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[10-20 16:53:08.990000] [114: adbd]android_usb gadget: Number of LUNs=2
<6>[10-20 16:53:08.990000] [114: adbd] lun0: LUN: removable file: (no medium)
<6>[10-20 16:53:08.990000] [114: adbd] lun1: LUN: removable read only CD-ROM file: (no medium)
<6>[10-20 16:53:08.990000] [114: adbd]android_usb gadget: android_usb ready
<6>[10-20 16:53:08.990000] [114: adbd]msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
<3>[10-20 16:53:08.990000] [114: adbd] usb_gadget_register_driver 2731
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: stop flags 0x1
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: STOP -> IDLE
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: idle flags 0x1
<6>[10-20 16:53:08.990000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
<6>[10-20 16:53:08.990000] [116: adbd]adb_open
<6>[10-20 16:53:09.130000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x2
<6>[10-20 16:53:09.130000] msm_hsusb msm_hsusb: suspend
<6>[10-20 16:53:09.130000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x10
<6>[10-20 16:53:09.250000] [101: rild]warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[10-20 16:53:09.360000] msm_hsusb msm_hsusb: reset
<6>[10-20 16:53:09.370000] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<4>[10-20 16:53:09.460000] [138: rild]pm_monitor_open exit
<6>[10-20 16:53:09.590000] [71: ov5640_wq]msm_sync_init: initialized ov5640
<6>[10-20 16:53:09.620000] msm_hsusb msm_hsusb: reset
<6>[10-20 16:53:09.620000] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<6>[10-20 16:53:09.930000] android_usb gadget: high speed config #1: android
<6>[10-20 16:53:09.930000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x20
<3>[10-20 16:53:10.110000] [115: file-storage]usb:rms:do_switch_mode 1932: 0
<3>[10-20 16:53:10.110000] [115: file-storage]usb:rms:do_switch_mode 1932: 0
<4>[10-20 16:53:10.210000] [63: usb_workqueue]usb:rms:usb_switch_work 1814: pid 0x83 switch_pid 0x1354
<3>[10-20 16:53:10.210000] [63: usb_workqueue]android_set_bind_functions: product id = 1355 num functions = 2 curr pid 0x1354
<3>[10-20 16:53:10.210000] [63: usb_workqueue]android_switch_composition: 1357: composite unregister
<6>[10-20 16:53:10.210000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x40
<6>[10-20 16:53:10.210000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: ONLINE -> STOP
<6>[10-20 16:53:10.210000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: stop flags 0x2
<6>[10-20 16:53:10.210000] [63: usb_workqueue]usb: android_unbind 1240 unbind
<3>[10-20 16:53:10.210000] [63: usb_workqueue]usb: android_unbind 1245 unbind usb_mass_storage
<3>[10-20 16:53:10.210000] [63: usb_workqueue]unregistered gadget driver 'android_usb'
<3>[10-20 16:53:10.210000] [63: usb_workqueue]android_switch_composition: 1362: composite register
<3>[10-20 16:53:10.210000] [63: usb_workqueue] usb_gadget_register_driver 2671
<3>[10-20 16:53:10.210000] [63: usb_workqueue] usb_gadget_register_driver 2695
<6>[10-20 16:53:10.210000] [63: usb_workqueue]android_bind
<3>[10-20 16:53:10.210000] [63: usb_workqueue]device_desc.product_id = 1354
<3>[10-20 16:53:10.210000] [63: usb_workqueue]_android_dev.product_id = 1354
<7>[10-20 16:53:10.210000] [63: usb_workqueue]android_bind_config
<3>[10-20 16:53:10.210000] [63: usb_workqueue]function modem in bind_functions
<3>[10-20 16:53:10.230000] [63: usb_workqueue]function usb_mass_storage in bind_functions
<6>[10-20 16:53:10.230000] [63: usb_workqueue]android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[10-20 16:53:10.230000] [63: usb_workqueue]android_usb gadget: Number of LUNs=1
<6>[10-20 16:53:10.230000] [63: usb_workqueue] lun0: LUN: removable file: (no medium)
<3>[10-20 16:53:10.230000] [63: usb_workqueue]function adb in bind_functions
<6>[10-20 16:53:10.230000] [63: usb_workqueue]adb_bind_config
<6>[10-20 16:53:10.230000] [63: usb_workqueue]android_usb gadget: android_usb ready
<6>[10-20 16:53:10.230000] [63: usb_workqueue]msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
<3>[10-20 16:53:10.230000] [63: usb_workqueue] usb_gadget_register_driver 2731
<6>[10-20 16:53:10.230000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: stop flags 0x1
<6>[10-20 16:53:10.230000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: STOP -> IDLE
<6>[10-20 16:53:10.230000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: idle flags 0x1
<6>[10-20 16:53:10.230000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
<6>[10-20 16:53:10.370000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x2
<6>[10-20 16:53:10.370000] msm_hsusb msm_hsusb: suspend
<6>[10-20 16:53:10.370000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x10
<6>[10-20 16:53:10.490000] msm_hsusb msm_hsusb: reset
<6>[10-20 16:53:10.490000] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] snd_avc_ctl 1
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] snd_agc_ctl 1
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.510000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[10-20 16:53:10.520000] [103: mediaserver][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.540000] [153: Playback Thread][snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[10-20 16:53:10.540000] [153: Playback Thread][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.540000] [152: ApmCommandThrea][snd.c:snd_ioctl] snd_set_volume 28 0 7
<6>[10-20 16:53:10.540000] [152: ApmCommandThrea][snd.c:snd_ioctl] chenjun:rc = 0
<6>[10-20 16:53:10.740000] msm_hsusb msm_hsusb: reset
<6>[10-20 16:53:10.740000] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<6>[10-20 16:53:11.000000] android_usb gadget: high speed config #1: android
<6>[10-20 16:53:11.010000] [5: events/0]msm_hsusb msm_hsusb: msm72k_udc: online flags 0x20
<6>[10-20 16:53:12.960000] [166: SurfaceFlinger]msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
<6>[10-20 16:53:13.000000] [111: akmd8962]AKM8962 AKECS_GetOpenStatus returned (1)
<6>[10-20 16:53:13.000000] [111: akmd8962]AKM8962 AKECS_GetCloseStatus returned (0)
<6>[10-20 16:53:13.000000] [158: system_server]AKM8962 AFLAG is set to 0
<6>[10-20 16:53:13.000000] [158: system_server]AKM8962 Delay is set to 200
<6>[10-20 16:53:13.000000] [158: system_server]AKM8962 MVFLAG is set to 0
<6>[10-20 16:53:13.000000] [158: system_server]AKM8962 Delay is set to 200
<6>[10-20 16:53:13.000000] [158: system_server]AKM8962 MFLAG is set to 0
<4>[10-20 16:53:21.030000] [212: WifiService]shaohua enter gpio_wlan_ctrl ----------------
<4>[10-20 16:53:21.030000] [212: WifiService]request success
<6>[10-20 16:53:21.190000] [152: ApmCommandThrea][snd.c:snd_ioctl] snd_set_volume 28 0 6
<6>[10-20 16:53:21.190000] [152: ApmCommandThrea][snd.c:snd_ioctl] chenjun:rc = 0
<2>[10-20 16:53:21.350000] [174: er.ServerThread][taos]light on while prox off
<2>[10-20 16:53:21.370000] [174: er.ServerThread][taos]TAOS_IOCTL_ALS_ON,lux=0
<6>[10-20 16:53:21.460000] [174: er.ServerThread]request_suspend_state: wakeup (3->0) at 18744525003 (2012-10-20 16:53:21.467346668 UTC)
<6>[10-20 16:53:21.460000] [174: er.ServerThread][early_suspend] wq status=-1
<4>[10-20 16:53:21.470000] [8: suspend][ZYF] lcdc_set_bl level=13, 1
<4>[10-20 16:53:21.470000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:21.470000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:21.500000] [212: WifiService]bcm_detect_card: (ad986400), call
<4>[10-20 16:53:21.520000] [212: WifiService]shaohua power on -------------------------
<4>[10-20 16:53:21.520000] [212: WifiService]
<4>[10-20 16:53:21.520000] [212: WifiService]Dongle Host Driver, version 4.218.248.6
<2>[10-20 16:53:21.660000] [5: events/0]TAOS: als_interrupt =30
<6>[10-20 16:53:21.670000] [13: kmmcd]mmc1: new SDIO card at address 0001
<4>[10-20 16:53:21.670000] [13: kmmcd]dhd_customer_oob_irq_map: customer specific Host GPIO number is (19)
<4>[10-20 16:53:21.670000] [13: kmmcd]shaohua read chip 0x18000000=0x16914319
<4>[10-20 16:53:21.680000] [13: kmmcd]DHD: dongle ram size is set to 294912(orig 294912)
<4>[10-20 16:53:21.680000] [13: kmmcd]chip is /system/etc/fw_4319.bin ,/system/etc/nv_4319.txt
<4>[10-20 16:53:21.970000] [13: kmmcd]shaohua get new mac success
<4>[10-20 16:53:21.970000] [13: kmmcd]Firmware version = wl0: Jun 8 2011 23:53:39 version 4.218.248.6
<4>[10-20 16:53:21.970000] [13: kmmcd]dhd reset infra mode 1
<4>[10-20 16:53:22.110000] [13: kmmcd]wlan0: Broadcom Dongle Host Driver mac=38:46:08:08:6a:75
<4>[10-20 16:53:22.110000] [13: kmmcd]Exited wl_control_wl_start
<6>[10-20 16:53:22.530000] [174: er.ServerThread][ZYF@pmic-leds]DISABLE red led blink
<6>[10-20 16:53:22.530000] [174: er.ServerThread][ZYF@pmic-leds]DISABLE green led blink
<4>[10-20 16:53:24.940000] [244: dhd_dpc]STA connect received 1
<6>[10-20 16:53:27.650000] [158: system_server][ZYF@pmic-leds]ENABLE red led blink
<6>[10-20 16:53:28.340000] [326: Binder Thread #][ZYF@pmic-leds]DISABLE red led blink
<6>[10-20 16:53:28.340000] [326: Binder Thread #][ZYF@pmic-leds]DISABLE green led blink
<4>[10-20 16:53:28.800000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<4>[10-20 16:53:28.870000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<4>[10-20 16:53:28.870000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<4>[10-20 16:53:28.870000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<4>[10-20 16:53:28.870000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<4>[10-20 16:53:28.970000] [304: wpa_supplicant]Unkown PRIVATE command, ignored
<6>[10-20 16:53:30.000000] [361: sh]CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
<6>[10-20 16:53:30.000000] [361: sh]CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
<7>[10-20 16:53:33.090000] wlan0: no IPv6 routers present
<3>[10-20 16:53:54.870000] [22: krpcserversd]--keycode from A9
<3>[10-20 16:53:54.870000] [22: krpcserversd] key:116 keycode:81
<2>[10-20 16:53:54.900000] [5: events/0]TAOS: als_interrupt =8
<3>[10-20 16:53:55.010000] [22: krpcserversd]--keycode from A9
<3>[10-20 16:53:55.010000] [22: krpcserversd] key:116 keycode:255
<4>[10-20 16:53:55.010000] [8: suspend][ZYF] lcdc_set_bl level=12, 1
<4>[10-20 16:53:55.010000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.010000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.040000] [8: suspend][ZYF] lcdc_set_bl level=11, 1
<4>[10-20 16:53:55.040000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.040000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.060000] [8: suspend][ZYF] lcdc_set_bl level=10, 1
<4>[10-20 16:53:55.060000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.060000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.080000] [8: suspend][ZYF] lcdc_set_bl level=9, 1
<4>[10-20 16:53:55.080000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.080000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.100000] [8: suspend][ZYF] lcdc_set_bl level=8, 1
<4>[10-20 16:53:55.100000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.100000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.110000] [8: suspend][ZYF] lcdc_set_bl level=7, 1
<4>[10-20 16:53:55.120000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.120000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.140000] [8: suspend][ZYF] lcdc_set_bl level=6, 1
<4>[10-20 16:53:55.140000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.140000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.150000] [8: suspend][ZYF] lcdc_set_bl level=5, 1
<4>[10-20 16:53:55.150000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.150000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.170000] [8: suspend][ZYF] lcdc_set_bl level=4, 1
<4>[10-20 16:53:55.170000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.170000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.180000] [8: suspend][ZYF] lcdc_set_bl level=3, 1
<4>[10-20 16:53:55.190000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.190000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.210000] [8: suspend][ZYF] lcdc_set_bl level=2, 1
<4>[10-20 16:53:55.210000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.210000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:55.240000] [8: suspend][ZYF] lcdc_set_bl level=1, 1
<4>[10-20 16:53:55.240000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:55.240000] [8: suspend][LY] send_bkl_data
<6>[10-20 16:53:55.250000] [197: ScreenOffThread]request_suspend_state: sleep (0->3) at 52530658336 (2012-10-20 16:53:55.253480001 UTC)
<6>[10-20 16:53:55.250000] [197: ScreenOffThread][early_suspend] wq status=1
<4>[10-20 16:53:55.250000] [8: suspend][ZYF] lcdc_set_bl level=0, 1
<6>[10-20 16:53:55.250000] [8: suspend]early_suspend: call handlers
<6>[10-20 16:53:55.250000] [8: suspend]early_suspend: handlers level=0
<4>[10-20 16:53:55.250000] [8: suspend][FYA@MSENSOR]akm8962_early_suspend[FYA@MSENSOR]suspended with flag = 0
<6>[10-20 16:53:55.250000] [8: suspend]early_suspend: handlers level=0
<2>[10-20 16:53:55.260000] [197: ScreenOffThread][taos]TAOS_IOCTL_ALS_OFF
<6>[10-20 16:53:55.260000] [8: suspend][hp@gsensor]:lis302dl suspend
<6>[10-20 16:53:55.260000] [8: suspend]early_suspend: handlers level=0
<6>[10-20 16:53:55.260000] [8: suspend]early_suspend: handlers level=0
<6>[10-20 16:53:55.260000] [8: suspend]early_suspend: handlers level=50
<6>[10-20 16:53:55.260000] [8: suspend]early_suspend: handlers level=51
<6>[10-20 16:53:55.260000] [8: suspend]early_suspend: handlers level=70
<4>[10-20 16:53:55.260000] [8: suspend]dhd_early_suspend: enter
<4>[10-20 16:53:55.260000] [8: suspend]dhd_set_suspend: enter, value = 1 in_suspend=1
<4>[10-20 16:53:55.260000] [8: suspend]dhd_set_suspend: force extra Suspend setting
<4>[10-20 16:53:55.270000] [8: suspend]suspend, KEEP_ALIVE
<4>[10-20 16:53:55.270000] [8: suspend]dhd_set_suspend result:41
<6>[10-20 16:53:55.270000] [8: suspend]early_suspend: handlers level=100
<6>[10-20 16:53:55.270000] [8: suspend]early_suspend: handlers level=148
<4>[10-20 16:53:55.270000] [8: suspend][ZYF] lcdc_set_bl level=0, 1
<2>[10-20 16:53:55.320000] [5: events/0]TAOS: als_interrupt =6
<4>[10-20 16:53:55.480000] [8: suspend]lcdc_panel_off , g_lcd_panel_type is 1(1 LEAD. 2 TRULY. 3 OLED. )
<6>[10-20 16:53:55.510000] [8: suspend]early_suspend: handlers level=149
<6>[10-20 16:53:55.510000] [8: suspend]early_suspend: handlers level=150
<6>[10-20 16:53:55.510000] [8: suspend]early_suspend: handlers level=150
<6>[10-20 16:53:55.510000] [8: suspend]early_suspend: handlers level=151
<6>[10-20 16:53:55.510000] [8: suspend]early_suspend: sync
<4>[10-20 16:53:55.550000] [9: suspend_sync]save exit: isCheckpointed 1
<4>[10-20 16:53:55.560000] [9: suspend_sync]save exit: isCheckpointed 1
<6>[10-20 16:53:55.560000] [8: suspend]early_suspend: sync end
<6>[10-20 16:53:55.560000] [8: suspend]active wake lock PowerManagerService
<6>[10-20 16:53:55.560000] [8: suspend]active wake lock usb_bus_active
<6>[10-20 16:53:55.560000] [8: suspend]active wake lock dhd_wake_lock, time left 2
<3>[10-20 16:53:56.230000] [22: krpcserversd]--keycode from A9
<3>[10-20 16:53:56.230000] [22: krpcserversd] key:116 keycode:81
<6>[10-20 16:53:56.230000] [203: WindowManagerPo]request_suspend_state: wakeup (3->0) at 53515486669 (2012-10-20 16:53:56.238310001 UTC)
<6>[10-20 16:53:56.230000] [203: WindowManagerPo][early_suspend] wq status=1
<6>[10-20 16:53:56.230000] [8: suspend]late_resume: call handlers
<6>[10-20 16:53:56.230000] [8: suspend]late_resume: handlers level=151
<6>[10-20 16:53:56.230000] [8: suspend]late_resume: handlers level=150
<6>[10-20 16:53:56.230000] [8: suspend]late_resume: handlers level=150
<6>[10-20 16:53:56.230000] [8: suspend]late_resume: handlers level=148
<6>[10-20 16:53:56.230000] [8: suspend]lcdc config
<2>[10-20 16:53:56.230000] [203: WindowManagerPo][taos]light on while prox off
<2>[10-20 16:53:56.250000] [203: WindowManagerPo][taos]TAOS_IOCTL_ALS_ON,lux=1510
<4>[10-20 16:53:56.260000] [8: suspend]spi_init
<4>[10-20 16:53:56.260000] [8: suspend]!
<3>[10-20 16:53:56.370000] [22: krpcserversd]--keycode from A9
<3>[10-20 16:53:56.370000] [22: krpcserversd] key:116 keycode:255
<4>[10-20 16:53:56.840000] [8: suspend][ZYF] lcdc_set_bl level=0, 1
<6>[10-20 16:53:56.840000] [8: suspend]late_resume: handlers level=100
<6>[10-20 16:53:56.850000] [8: suspend]late_resume: handlers level=70
<4>[10-20 16:53:56.850000] [8: suspend]dhd_late_resume: enter
<4>[10-20 16:53:56.850000] [8: suspend]dhd_set_suspend: enter, value = 0 in_suspend=0
<4>[10-20 16:53:56.850000] [8: suspend]dhd_set_suspend: Remove extra suspend setting
<4>[10-20 16:53:56.860000] [8: suspend]resume, KEEP_ALIVE
<4>[10-20 16:53:56.860000] [8: suspend]dhd_set_suspend result:41
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=51
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=50
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=0
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=0
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=0
<6>[10-20 16:53:56.860000] [8: suspend][hp@gsensor]:lis302dl resume
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: handlers level=0
<4>[10-20 16:53:56.860000] [8: suspend][FYA@MSENSOR]akm8962_early_resume[FYA@MSENSOR]resumed with flag = 0
<6>[10-20 16:53:56.860000] [8: suspend]late_resume: done
<4>[10-20 16:53:56.860000] [8: suspend][ZYF] lcdc_set_bl level=1, 1
<4>[10-20 16:53:56.860000] [8: suspend][LY] before select_1wire_mode
<4>[10-20 16:53:56.860000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.860000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.870000] [8: suspend][ZYF] lcdc_set_bl level=2, 1
<4>[10-20 16:53:56.870000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.870000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.870000] [8: suspend][ZYF] lcdc_set_bl level=3, 1
<4>[10-20 16:53:56.870000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.870000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.880000] [8: suspend][ZYF] lcdc_set_bl level=4, 1
<4>[10-20 16:53:56.880000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.880000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.890000] [8: suspend][ZYF] lcdc_set_bl level=5, 1
<4>[10-20 16:53:56.890000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.890000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.890000] [8: suspend][ZYF] lcdc_set_bl level=6, 1
<4>[10-20 16:53:56.890000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.890000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.900000] [8: suspend][ZYF] lcdc_set_bl level=7, 1
<4>[10-20 16:53:56.900000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.900000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.910000] [8: suspend][ZYF] lcdc_set_bl level=8, 1
<4>[10-20 16:53:56.910000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.910000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.920000] [8: suspend][ZYF] lcdc_set_bl level=9, 1
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.920000] [8: suspend][ZYF] lcdc_set_bl level=10, 1
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.920000] [8: suspend][ZYF] lcdc_set_bl level=11, 1
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.920000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.930000] [8: suspend][ZYF] lcdc_set_bl level=12, 1
<4>[10-20 16:53:56.930000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.930000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:53:56.930000] [8: suspend][ZYF] lcdc_set_bl level=13, 1
<4>[10-20 16:53:56.930000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:53:56.930000] [8: suspend][LY] send_bkl_data
<2>[10-20 16:53:57.020000] [5: events/0]TAOS: als_interrupt =32
<4>[10-20 16:54:01.270000] [8: suspend][ZYF] lcdc_set_bl level=12, 1
<4>[10-20 16:54:01.270000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.270000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.280000] [8: suspend][ZYF] lcdc_set_bl level=11, 1
<4>[10-20 16:54:01.280000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.280000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.300000] [8: suspend][ZYF] lcdc_set_bl level=10, 1
<4>[10-20 16:54:01.300000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.300000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.310000] [8: suspend][ZYF] lcdc_set_bl level=9, 1
<4>[10-20 16:54:01.310000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.310000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.330000] [8: suspend][ZYF] lcdc_set_bl level=8, 1
<4>[10-20 16:54:01.330000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.330000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.360000] [8: suspend][ZYF] lcdc_set_bl level=7, 1
<4>[10-20 16:54:01.360000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.360000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.380000] [8: suspend][ZYF] lcdc_set_bl level=6, 1
<4>[10-20 16:54:01.380000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.380000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.400000] [8: suspend][ZYF] lcdc_set_bl level=5, 1
<4>[10-20 16:54:01.400000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.400000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.410000] [8: suspend][ZYF] lcdc_set_bl level=4, 1
<4>[10-20 16:54:01.410000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.410000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.430000] [8: suspend][ZYF] lcdc_set_bl level=3, 1
<4>[10-20 16:54:01.430000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.430000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.460000] [8: suspend][ZYF] lcdc_set_bl level=2, 1
<4>[10-20 16:54:01.460000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.460000] [8: suspend][LY] send_bkl_data
<4>[10-20 16:54:01.480000] [8: suspend][ZYF] lcdc_set_bl level=1, 1
<4>[10-20 16:54:01.480000] [8: suspend][LY] send_bkl_address
<4>[10-20 16:54:01.480000] [8: suspend][LY] send_bkl_data
<6>[10-20 16:54:01.490000] [197: ScreenOffThread]request_suspend_state: sleep (0->3) at 58776778336 (2012-10-20 16:54:01.499600001 UTC)
<6>[10-20 16:54:01.490000] [197: ScreenOffThread][early_suspend] wq status=1
<2>[10-20 16:54:01.500000] [197: ScreenOffThread][taos]TAOS_IOCTL_ALS_OFF
<4>[10-20 16:54:01.500000] [8: suspend][ZYF] lcdc_set_bl level=0, 1
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: call handlers
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=0
<4>[10-20 16:54:01.500000] [8: suspend][FYA@MSENSOR]akm8962_early_suspend[FYA@MSENSOR]suspended with flag = 0
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=0
<6>[10-20 16:54:01.500000] [8: suspend][hp@gsensor]:lis302dl suspend
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=0
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=0
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=50
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=51
<6>[10-20 16:54:01.500000] [8: suspend]early_suspend: handlers level=70
<4>[10-20 16:54:01.500000] [8: suspend]dhd_early_suspend: enter
<4>[10-20 16:54:01.500000] [8: suspend]dhd_set_suspend: enter, value = 1 in_suspend=1
<4>[10-20 16:54:01.500000] [8: suspend]dhd_set_suspend: force extra Suspend setting
<4>[10-20 16:54:01.520000] [8: suspend]suspend, KEEP_ALIVE
<4>[10-20 16:54:01.520000] [8: suspend]dhd_set_suspend result:41
<6>[10-20 16:54:01.520000] [8: suspend]early_suspend: handlers level=100
<6>[10-20 16:54:01.520000] [8: suspend]early_suspend: handlers level=148
<4>[10-20 16:54:01.520000] [8: suspend][ZYF] lcdc_set_bl level=0, 1
<4>[10-20 16:54:01.730000] [8: suspend]lcdc_panel_off , g_lcd_panel_type is 1(1 LEAD. 2 TRULY. 3 OLED. )
<6>[10-20 16:54:01.760000] [8: suspend]early_suspend: handlers level=149
<6>[10-20 16:54:01.760000] [8: suspend]early_suspend: handlers level=150
<6>[10-20 16:54:01.760000] [8: suspend]early_suspend: handlers level=150
<6>[10-20 16:54:01.760000] [8: suspend]early_suspend: handlers level=151
<6>[10-20 16:54:01.760000] [8: suspend]early_suspend: sync
<4>[10-20 16:54:01.790000] [9: suspend_sync]save exit: isCheckpointed 1
<6>[10-20 16:54:01.790000] [8: suspend]early_suspend: sync end
<6>[10-20 16:54:01.790000] [8: suspend]active wake lock PowerManagerService
<6>[10-20 16:54:01.790000] [8: suspend]active wake lock usb_bus_active
<6>[10-20 16:54:01.790000] [8: suspend]active wake lock dhd_wake_lock, time left 1


thanks for looking at this Ceco, and the crash adb course. :D :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#36
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
OK. So here is the difference.
Yours:
<4>[01-01 00:00:00.210000] [1: swapper]spi_init
<4>[01-01 00:00:00.210000] [1: swapper]!truly id is [color=#ff0000][b]0x6904[/b][/color]
<4>[01-01 00:00:00.240000] [1: swapper]lead id 0xDA00 is 0x0

Mine:
<4>[01-01 00:00:00.210000] [1: swapper]spi_init
<4>[01-01 00:00:00.210000] [1: swapper]!truly id is [color=#ff0000][b]0x0[/b][/color]
<4>[01-01 00:00:00.240000] [1: swapper]lead id 0xDA00 is 0x0

I went through all available kernel sources of 4.3 wvga zte devices but could
not find a track of 0x6904... Only 0x6902 and 0x6903 which are TRULY lcds. So yours could be also truly but since there is no lcd init for id 0x6904 it fallbacks to LEAD...
Where did you get the panel from? Can you link me to it?
What I could do is to include 0x6904 in init function to force your LCD to be identified as truly although I am kind of sceptic here. But it is worth a try.

  • 1
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#37
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
evening, I'll have to clarify with the Mrs, but me iam thinking one like this from Hong Kong

http://item.mobilewe...nid=25327857527

:)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#38
C3C0

C3C0

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,179 posts
  • Gender:Male
  • Location:Slovakia (Bratislava)
  • Devices:Nexus 5
Here is the experimental S2 kernel. It's possible it won't even boot so be prepared :)
Don't forget to make a kmsg log again.
http://ceco.sk.eu.or...id-20121021.zip

  • 1
Links to my stuff: SlimBean (Android 4.2.2), RootBox (CM/AOKP/PA mix 4.2.2), ParanoidJelly2 (AOSPA 4.2.2), ParanoidJelly (JB), ParanoidAndroid (ICS), MokeeOS (GB), CM7.2 (GB), SKatie (GB), SwedishSnow (GB), Kernels
If you like my contribution to Android community, click donate button on my page at: http://ceco.sk.eu.org
Please, do not use personal conversation to solve your problems. Use forum - its power is often underestimated. If I can't help somebody else will certainly try to. Thanks.

#39
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4

Here is the experimental S2 kernel. It's possible it won't even boot so be prepared :)
Don't forget to make a kmsg log again.
http://ceco.sk.eu.or...id-20121021.zip


thank you will test. I'll have to grab kmsg on the morning. but will post boot result in about 10 minutes.

thank you Ceco :)

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.

#40
plegdroid

plegdroid

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 3,338 posts
  • Gender:Male
  • Location:manchester
  • Interests:house music, science, technology ,history
  • Devices:LG Nexus 4 . PA. 4.4
Ceco, your a genious, works a dream. And has also reset screen dimentions also.it was previously cutting half the status bar off.

Could this mod be translated to S3 /S4 kernal? Man iam so happy and so thankful to you for your help :) :D

  • 0
ⓐⓝⓓⓡⓞⓢⓘⓓⓔ ⓘⓢ ⓝⓞⓣ ⓐ ⓢⓘⓝ
4.2.2 -Test monkey.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users