22 replies to this topic

[zecinikolaz]

Hi guys, does anyone heard for ZTE blade 3,  is there any custom roms for new blade, and could it flash roms from old blade?

[hydo1]

No ROMs are designed very specifically for one device. The only similarities hardware wise between the Blade and the Blade and the Blade III is the screen resolution because the hardware in it is so different Blade ROMs will not be compatible so DO NOT TRY AND FLASH THEM ON A BLADE III

[HuaweiUnlockNCK]

ZTE Blade 3 / ZTE Blade III / P772N

Model Build Prop Country Download Date Version
ZTE Blade 3 Build Prop Albania Download 10.09.2012 ICS_P772N10V1.0.0B08
ZTE Blade 3 Build Prop Moldova Download 16.10.2012 P772N10_OMDV1.0.0B02
ZTE Blade 3 Build Prop Serbia Download 09.11.2012 P772N10_SRBV1.0.0B02
ZTE Blade 3 Build Prop Sweden Download 08.11.2012 COMVIQ_P772N10V1.0.0B02
ZTE Blade 3 Build Prop Sweden Download 07.11.2012 P772N10_TELENORV1.0.0B04
ZTE Blade 3 Build Prop Austria Download 10.09.2012 ICS_P772N10V1.0.0B08
ZTE Blade 3 Build Prop Belgium Download 10.09.2012 ICS_P772N10V1.0.0B08
ZTE Blade 3 Build Prop Croatia Download 22.10.2012 P772N10_TELE2V1.0.0B02
ZTE Blade 3 Build Prop Czech Download 18.10.2012 ICS_O2_P772N10V1.0.0B02
ZTE Blade 3 Build Prop Finland Download 10.09.2012 ICS_P772N10V1.0.0B08
ZTE Blade 3 Build Prop Greece Download 11.10.2012 P772N10_COSMOTEV1.0.0B02
ZTE Blade 3 Build Prop Hungary Download 10.09.2012 ICS_P772N10V1.0.0B08
ZTE Blade 3 Build Prop Romania Download 23.10.2012 ICS_P772N10V1.0.0B09
ZTE Blade 3 Build Prop Serbia Download 27.09.2012 P772N10_VIPV1.0.0B02
ZTE Blade 3 Build Prop Sweden Download 23.10.2012 ICS_P772N10V1.0.0B09
ZTE Blade 3 Build Prop Israel Download 02.11.2012 EUROCOM_P772N10V1.0.0B03

[sxp]

only one custom rom Zte Blade3  Telenor Hungary
de odexed and pre-rooted and little mod ...
CWM recovery install

[sxp]

CWM recovery blade3


Usb debug enable
run exe file
1 select install cwm recovery
2 select restore original

enter recovery : volume down+power

[sxp]

deodexed pre rooted hungary telenor rom
part1
part2

copy phone
full wipe
and install

install only work Cwm recovery, Not 3e recovery

[Lost_Animal]

I can Confirm that all the procedure from sxp above, is correct ....
Now my new ZTE BLADE is CWModed.

Thanks my friend.

Now its time to test this deodexed telenor ROM.

[Tomsy]

The new Blade III is much more slower, than my genuine OSF. I will only buy the new one, after a nice custom rom is released.

[apeelme]

sxp, on 16 December 2012 - 06:01 PM, said:

CWM recovery blade3


Usb debug enable
run exe file
1 select install cwm recovery
2 select restore original

enter recovery : volume down+power

Thanks to share my work...
I worked a lot with this, just mention my name...as many is enough.

CWM source is here: link

The modded rom original site: link

and i made some patches here (modded callscreen, lockscreen, battery percentage in status bar, extended power menu)

video: link

The original stock recovery installer this product name only works: P772N10

Albania: build.prop
Austria: build.prop
Belgium: build.prop
Finland: build.prop
Hungary: build.prop
Romania: build.prop
Serbia MTS:

Edited by apeelme, 26 December 2012 - 11:20 AM.

[apeelme]

ClockworkMod recovery, patches, drivers....

http://zteblade3.blogspot.com

[apeelme]

Yes, we made it! We have OverClocked kernel for ZTE Blade 3!!!
A very inhabited ROM in AnTuTu Benchmark v3.0.3 (without SD I/O test!) I tested only the kernel speed. You can see the test results on my site. For a while I test the functions, and if all right then I publish!

http://zteblade3.blo...-good-news.html

[KonstaT]

apeelme, on 20 January 2013 - 09:20 PM, said:

Yes, we made it! We have OverClocked kernel for ZTE Blade 3!!!
A very inhabited ROM in AnTuTu Benchmark v3.0.3 (without SD I/O test!) I tested only the kernel speed. You can see the test results on my site. For a while I test the functions, and if all right then I publish!

http://zteblade3.blo...-good-news.html

Lol, what? Is that some kind of a joke. What you probably meant was that I made it - there was no we in that. And I already published it and I already published the source code for it!

On the first day I release something for this device and someone already tries to screw me over... off to a great start.

[GizmoTheGreen]

KonstaT, on 21 January 2013 - 08:40 AM, said:

Lol, what? Is that some kind of a joke. What you probably meant was that I made it - there was no we in that. And I already published it and I already published the source code for it!

On the first day I release something for this device and someone already tries to screw me over... off to a great start.

that was my first thought as well... unless he used your source and then made some other tweaks? or?

[Hjanos]

apeelme, on 20 January 2013 - 09:20 PM, said:

Yes, we made it! We have OverClocked kernel for ZTE Blade 3!!!
A very inhabited ROM in AnTuTu Benchmark v3.0.3 (without SD I/O test!) I tested only the kernel speed. You can see the test results on my site. For a while I test the functions, and if all right then I publish!

http://zteblade3.blo...-good-news.html

KonstaT, on 21 January 2013 - 08:40 AM, said:

Lol, what? Is that some kind of a joke. What you probably meant was that I made it - there was no we in that. And I already published it and I already published the source code for it!

On the first day I release something for this device and someone already tries to screw me over... off to a great start.

Let me make this clear. WE (he meant me and him of course) DID NOT STEAL YOUR WORK!!!
We have just seen that the Blade 3 section was created.
Later I will post screenshots that proves us.

Anyway I will release CyanogenMod 9 today. Do you think we have stolen that too??

We used the V889D source as base just like you, but from that our commits are different ...

We had CWM long before you, but we are not accusing you of stealing our work. We expect the same from you!

Edited by Hjanos, 23 January 2013 - 09:37 AM.

[KonstaT]

Hjanos, on 23 January 2013 - 09:20 AM, said:

Let me make this clear. WE (he meant me and him of course) DID NOT STEAL YOUR WORK!!!
We have just seen that the Blade 3 section was created.
Later I will post screenshots that proves us.

Anyway I will release CyanogenMod 9 today. Do you think we have stolen that too??

We used the V889D source as base just like you, but from that our commits are different ...

We had CWM long before you, but we are not accusing you of stealing our work. We expect the same from you!

I was just saying that the timing was a bit suspicious to say the least. Just release to source code (as GPL of course legally obligates you) if/when you release the kernel. Screenshot doesn't prove anything and I've got screenshots too.

 Screenshot_2013-01-22-16-46-10.png   236.68K   20 downloads

If you are willing to maintain open source spirit, there is no reason why we can't all work together. I want to see this device run CyanogenMod (and other things) just as much as everyone else.

And what comes to ClockWorkMod, actually I had that months before you (Acqua is basically the same device). Thread, source code.

[Hjanos]

KonstaT, on 23 January 2013 - 09:47 AM, said:

I was just saying that the timing was a bit suspicious to say the least. Just release to source code (as GPL of course legally obligates you) if/when you release the kernel. Screenshot doesn't prove anything and I've got screenshots too.

Screenshot_2013-01-22-16-46-10.png

If you are willing to maintain open source spirit, there is no reason why we can't all work together. I want to see this device run CyanogenMod (and other things) just as much as everyone else.

I see what you mean, I meant screenshots about our not yet published kernel source commits.

How is your CM9 progressing? What is left to be fixed?
I got everything working.
Only one bug presents: camera saves pictures 90° rotated.
We would be happy to work together to get CM working. I will release the source  code soon, after I clean it up a bit.

[KonstaT]

Hjanos, on 23 January 2013 - 10:17 AM, said:

I see what you mean, I meant screenshots about our not yet published kernel source commits.

How is your CM9 progressing? What is left to be fixed?
I got everything working.
Only one bug presents: camera saves pictures 90° rotated.
We would be happy to work together to get CM working. I will release the source  code soon, after I clean it up a bit.

It's been progressing nicely, I only started last weekend.

RIL is still giving me some trouble. I can also confirm the camera issue - preview is 90 degrees rotated, pictures are fine. Nothing major besides that.

[Hjanos]

KonstaT, on 23 January 2013 - 10:26 AM, said:

It's been progressing nicely, I only started last weekend.

RIL is still giving me some trouble. I can also confirm the camera issue - preview is 90 degrees rotated, pictures are fine. Nothing major besides that.

RIL is working in my build
In your build videos are also rotated. In my build videos and preview are fine, but pictures are rotated. I think we will need to port CAF camera

[KonstaT]

Hjanos, on 23 January 2013 - 10:59 AM, said:

RIL is working in my build
In your build videos are also rotated. In my build videos and preview are fine, but pictures are rotated. I think we will need to port CAF camera

Yeah, I got telephony and sms working (lge ril class seems somewhat working). Still needs mobile data.

[Hjanos]

KonstaT, on 23 January 2013 - 11:42 AM, said:

Yeah, I got telephony and sms working (lge ril class seems somewhat working). Still needs mobile data.

Use QualcommSharedRIL this has both working.
Anyway, I will try to publish my devtree today, so we can go forward from that state.
I think you could port CAF camera source if you have time, all other things are working in my devtree