Guest bdw1971 Posted December 12, 2012 Report Share Posted December 12, 2012 (edited) Hi, First time poster, long-time lurker. I bricked my SFII today - I was trying to debrand it and at some point in the process when the phone was linked to my PC there was a "fail" message - I think it was during the part when I was using QPST. **edit - it failed during the OSF flasher, patched by Radmir Result: The phone is stuck at the little green android. It will not boot to FTM or anything else. My PC recognises it in Device Manager ("ZTE Handset Diagnostic Interface") but I cannot access it via Windows Explorer. I have downloaded a firmware flasher USDL_P726CV1.00.00 - (the current ZTE update tool does not recognise the handset) and have found the following files to flash (part of "Unlock OSF2") : amss.mbn amsshd.mbn appsboot.mbn appsboothd.mbn cefs.mbn oemsbl.mbn oemsblhd.mbn partition.mbn partition_zte.mbn qcsbl.mbn qcsblhd_cfgdata.mbn boot cache recovery splash system userdata However, when I try to flash these to the phone, the first few work - it gets to 22/100 then I get an error message "Download fail, please check the log file to get fail information" This is the logfile: 2012.12.12 21:16:3¡ª¡ªDownload armprg.bin... 2012.12.12 21:16:9¡ª¡ªskip to armprg... 2012.12.12 21:16:15¡ª¡ªenter security mode... 2012.12.12 21:16:15¡ª¡ªDownload partition.mbn... 2012.12.12 21:16:15¡ª¡ªDownload qcsblhd_cfgdataPath.mbn File... 2012.12.12 21:16:16¡ª¡ªDownload OEM bootloader... 2012.12.12 21:16:17¡ª¡ªDownload AMSS... 2012.12.12 21:16:21¡ª¡ª¸ßËÙÐÒéÏ´«ËÍÊý¾Ýʧ°Ü 2012.12.12 21:16:21¡ª¡ªDownload fail, please check the log file to get fail information! Any ideas on how to revive it or should I just send it back pretending "it's gone a bit funny"? Thanks Edited December 12, 2012 by bdw1971 Link to comment Share on other sites More sharing options...
Guest bdw1971 Posted December 12, 2012 Report Share Posted December 12, 2012 Update: I've managed to get the phone back to FTM mode using the instructions here: http://www.modaco.com/topic/354290-how-tosave-your-dead-vivacity/ I then dumped a CWM image onto the SD card, booted from that and now have CWM 5 installed. I then went through the wipe cache partition, wipe data, wipe dalvik cache process and installed Fish n Chips (from the SD card). The install reported back OK but every time I reboot, remove battery etc. I boot into CWM. When I plug the phone into my PC it's recognised in Device Manager but not Windows Explorer - It feels like I'm nearly there - any ideas of how to get me out of CWM? Link to comment Share on other sites More sharing options...
Guest bdw1971 Posted December 13, 2012 Report Share Posted December 13, 2012 Aaargh! God knows which of the SF2 roms I tried to install - it looked like it was working really well from CWM - progress bar went across etc. When I rebooted I was stuck in FTM - can't get CWM back on there. The only upside is the ZTE updater recognises the device but won't download the update - it says it's doing it but after 10 minutes the indicator hasn't shifted from 0% and there's nothing in the download directory but a tiny tmp file. I think it's time to take it back. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now