713 replies to this topic

[sam tyler]

sergiuv, on 05 February 2013 - 03:51 PM, said:

I also got a 5 MP camera. But I'm not happy with the video. I can see half of frames overallping previous ones. Is it just my phone ? I didn't noticed anyone complaining and I tried 3 ROMS ... Thanks.

never used the video cam so far,just did a quick test (20 second clip)i did noticed the the frames shifting to one side,maybe because this ROM is based with an apk for a 3 m.p phone? i also noticed that if i didn't move the phone around fast,the shifting stopped or happened infrequently  i did a reboot,but it still did it.maybe if someone has the original camera apk or if the a standard zte blade ROM(with 5 m.p.camera )  is available i did check list for ROM with 5 m.p even the rbm1 rom from here  http://www.modaco.co...k-roms/���� but i could not see it.as i said i think the camera app on this ROM  was made just for a 3 m.p. camera.but strange that it detect that my phone is a 5 m.p.(in photo mode) could KonstaT or daemond offer any advice?

Edited by sam tyler, 05 February 2013 - 05:18 PM.

[daemond]

KonstaT, on 05 February 2013 - 02:18 PM, said:

@daemond
I noticed little something while playing with my new toy. On Android 4.2 surfaceflinger reports vsync period that it gets from fb HAL. This is from my Blade running CM10.1.

W/SurfaceFlinger( 99): getting VSYNC period from fb HAL: 21739130

That translates to 46 Hz.

On my other device I get solid 16666666 -> 60 Hz. Any idea what's up with that?

I already noticed this earlier when implementing vsync events, there's a funny glitch with the Blade's display: on boot up, the refresh rate is just ~46 Hz. If turned off and then on again, the display reinitializes to the correct rate of 61 Hz. It's easy to test with this app. Probably there's something off in the framebuffer driver...

[jventura]

daemond, on 05 February 2013 - 07:15 PM, said:

I already noticed this earlier when implementing vsync events, there's a funny glitch with the Blade's display: on boot up, the refresh rate is just ~46 Hz. If turned off and then on again, the display reinitializes to the correct rate of 61 Hz. It's easy to test with this app. Probably there's something off in the framebuffer driver...

I get ~46 Hz in CM9 also.. No vsync there, though..

[daemond]

Sure you have vsync. Don't confuse vsync event timing with vsync'ed refresh. Android has always used vsync'ed display refresh to avoid tearing.

[W0jt1]

short question.
i broke my blade volume keys, can i set in navigation bar buttons for volume up\down like some android tablets have? (if not, have pa jb such an option?)
i thought that there was an option like that, but i may me be wrong


EDIT
or can be added volume up\down option to statusbar widgets? that would be very useful ^^

EDIT 2
some random app i found in store i saving me, it is giving possibility to set volume in it

Edited by W0jt1, 05 February 2013 - 09:03 PM.

[ehleh]

bro can you make a sony theme ui ? .. thanks !

[GenSek]

Second icon in dock disappears when setting number of homescreens to "2".
Konstat's doesn't have this bug, AFAIR.
 2.JPG   19.77K   44 downloads

[C3C0]

daemond, on 05 February 2013 - 07:15 PM, said:

I already noticed this earlier when implementing vsync events, there's a funny glitch with the Blade's display: on boot up, the refresh rate is just ~46 Hz. If turned off and then on again, the display reinitializes to the correct rate of 61 Hz. It's easy to test with this app. Probably there's something off in the framebuffer driver...

Hmm. Just tested in on my PJ2 which is a mix of CM10.1 and AOSPA2.99 and it gives me max of 55 FPS. Haven't checked on CM10, yet.

[merc1800k]

i am trying to play web tv but its close..

i n older roms working (ant1 tv app from store)

check it pls

[ztnej]

can i use s2e from google play for this rom?

[elrond_bs]

merc1800k, on 06 February 2013 - 03:07 PM, said:

i am trying to play web tv but its close..
i n older roms working (ant1 tv app from store)
check it pls

Nobody checks apps on request, least of all developers! AFAIK, video streaming is working, so if your app doesn't work, there could be many reasons. Did it work on any 4.1 ROM? If not - ask the author of the app, if it supports 4.1. You could use Android 2.3, Android 4.x is not officially supported on our phones and if you use it, you agree to the possibility that some app may not work.

Edited by elrond_bs, 06 February 2013 - 06:16 PM.

[De@n]

ztnej, on 06 February 2013 - 05:37 PM, said:

can i use s2e from google play for this rom?

Yes.

[ztnej]

De@n, on 06 February 2013 - 07:43 PM, said:

Yes.

Thank you and also thank you daemond, KonstaT and everyone else involved!

[TheQuest193]

Hi, i have installed cm-10.1-20130129-KonstaKANG-blade.zip.
Initially everything looks fine.
But later discoverd that below stuffs are not working
1. USB Tethering is working, but its not carrying the internet from mobile to PC
2. Wifi hotspot also not carrying internet to PC
Can anyone please suggest me a stable ROM or fix for the above items.

Even i re-installed the ROM by formatting Cache, Data, System, but no luck.

I tried with USB debugging enabled, but no luck.

Any suggestion is really helpful.

[merc1800k]

elrond_bs, on 06 February 2013 - 06:00 PM, said:

Nobody checks apps on request, least of all developers! AFAIK, video streaming is working, so if your app doesn't work, there could be many reasons. Did it work on any 4.1 ROM? If not - ask the author of the app, if it supports 4.1. You could use Android 2.3, Android 4.x is not officially supported on our phones and if you use it, you agree to the possibility that some app may not work.

thanks..this app work at other roms 4.0 and 2.3 ..but no at roms 4.1 , 4.2

[xeqL]

Hi, new user here, I'm not sure if I understood properly, but is this rom for Gen1 or Gen2? Thanks.

[De@n]

xeqL, on 07 February 2013 - 09:27 AM, said:

Hi, new user here, I'm not sure if I understood properly, but is this rom for Gen1 or Gen2? Thanks.

Gen2.

[xeqL]

De@n, on 07 February 2013 - 09:38 AM, said:

Gen2.

Thanks for the quick reply !

[encore.neil]

Somebody please help!
I just upgraded to this rom from Swedish Snow RLS7.
sd-ext was working fine in Swedish Snow RLS7 cut after installing this rom under partition info i kept on getting ext partition unavailable
I formatted my whole sd card(using magic partition creator) and again created a new partition using CWM 5.0.2
Installed s2e from playstore.
But still i kept on getting ext partition unavailable under partition info.
How can i mount my sd-ext ???

[James Horny]

encore.neil, on 07 February 2013 - 02:48 PM, said:

Somebody please help!
I just upgraded to this rom from Swedish Snow RLS7.
sd-ext was working fine in Swedish Snow RLS7 cut after installing this rom under partition info i kept on getting ext partition unavailable
I formatted my whole sd card(using magic partition creator) and again created a new partition using CWM 5.0.2
Installed s2e from playstore.
But still i kept on getting ext partition unavailable under partition info.
How can i mount my sd-ext ???

Install https://docs.google....eVJRSmFIdEc1T1E
in CWM.

...and prefer SuperSU to Superuser.

Edited by James Horny, 07 February 2013 - 03:35 PM.