695 replies to this topic

[twat4u]

99x, on 25 January 2013 - 05:17 PM, said:

Nice, better than me, what performance settings you using?

My governor is smartassv2 and cpu 748 MHz when display is on.

[HarryPirate]

daemond, on 24 January 2013 - 03:00 AM, said:

I have successfully made vsync events (i.e. Project Butter) work. This was never really implemented correctly for MDP 3.00 in the MSM7x27, but the hardware can do it, and after a bit of reading code and hacking around, it seems to work just fine! It feels a little bit smoother with vsync event timing enabled, especially touch latency appears to be reduced. But I have no good way to measure this.

The most important bits can be found in my kernel tree, but the device tree requires some additional updates, too.

Please test this, if you can.

You are on fire! Btw I was wondering if this patch also can be applied to ZTE V9?

[xondrax]

Hi,what I have to use if I want to know if downloading is 100% correct?Everytime developers are using MD5 for verify and now i dont know what to do with SHA1

[Squizzy911]

it is a hash like md5 but another

[陰莖:)]

xondrax, on 25 January 2013 - 08:12 PM, said:

Hi,what I have to use if I want to know if downloading is 100% correct?Everytime developers are using MD5 for verify and now i dont know what to do with SHA1

To check sha1sum tat the download is correct.!
U can use google sha1
Seetis: http://ja.wikipedia.org/wiki/Sha1sum.

Edited by 陰莖:), 25 January 2013 - 08:40 PM.

[xondrax]

Guys...I knew it,but what sw I have to use?I was using WinMD5 for verify but dont know what to do with SHA1.Or can some post MD5 sum for the daemond ROM?

陰莖 thanks

Edited by xondrax, 25 January 2013 - 09:16 PM.

[陰莖:)]

xondrax, on 25 January 2013 - 08:36 PM, said:

Guys...I knew it,but what sw I have to use?I was using WinMD5 for verify but dont know what to do with SHA1.Or can some post MD5 sum for the daemond ROM?

You use winsha1.

[elrond_bs]

It would be good if daemon adds MD5 sums or replace SHA with MD5. I know SHA is better, but for some people it will be confusing. Even I didn't read it's SHA the first time and had to recheck why my MD5 didn't match.

[陰莖:)]

Sha1 good. Learn how to use, not so complicated. This forum for advanced users only. Has to know which tools to use.

[99x]

AFV app can verify md5 and sha1 in android.

[peetu20]

Are we finally getting vsync and 60fps UI? How can our blade with lazy cpu qnd gpu hande 60 fps?

[DoubleM101]

I still get a problem with this version. It´s a nightmare to turn on the phone. I have to turn on and off the phone multiple times until i can get it to work properly. Sometimes it takes 10 minutes until i can use it.

When the phone should exhibit the unlock pattern, it won´t. It only shows the wallpaper (bigger than usual), without the unlock pattern and some artifacts on top. I could do a video if it helps

Edited by DoubleM101, 26 January 2013 - 11:28 AM.

[nio25]

Maybe someone could upload a build with vsync enabled to test too plz?

[99x]

DoubleM101, on 26 January 2013 - 11:28 AM, said:

I still get a problem with this version. It´s a nightmare to turn on the phone. I have to turn on and off the phone multiple times until i can get it to work properly. Sometimes it takes 10 minutes until i can use it.

When the phone should exhibit the unlock pattern, it won´t. It only shows the wallpaper (bigger than usual), without the unlock pattern and some artifacts on top. I could do a video if it helps

Definitely shouldn't be doing that, are you running a high OC or any other startup scripts? Full wipe and reflash may be the only solution

[DoubleM101]

99x, on 26 January 2013 - 02:57 PM, said:

Definitely shouldn't be doing that, are you running a high OC or any other startup scripts? Full wipe and reflash may be the only solution

The only thing i have is Link2sd. Maybe it´s the cause.I´ve uninstalled it and for two times the phone boots at first attempt.. But could be an coincidence. I´ll test better

Edited by DoubleM101, 26 January 2013 - 04:29 PM.

[elrond_bs]

Uninstalling Link2SD will not remove your apps from the ext partition on SD card nor will change anything related to the ext (apps are linked as before). Try full wipe, and install again.

[Mettafox]

peetu20, on 26 January 2013 - 08:50 AM, said:

Are we finally getting vsync and 60fps UI? How can our blade with lazy cpu qnd gpu hande 60 fps?

60fps, I don't know if is possible for our hardware, but, some improvements we will see, probably.

[C3C0]

I've been running hw vsync on my skate for couple of days and I can't see any difference myself so don't expect any drastic improvements. Anyway, at least it feels good to have.

[ziofaggio]

hi folk,
italian online sms dictation don't work and i don't find that offline.
and you?
it's a cyano bug otherwise must i do something to let it work?
thanks.

[Polys Polykarpou]

twat4u, on 25 January 2013 - 04:36 PM, said:

Just test. Antutu give 2656 points.   
Good to use your girlfriend daily, go ahead.

What performance settings are you using? (other than smartassv2)