Jump to content


Photo

HELP! I think my LIQUID E is bricked, but I don't give up....

- - - - -

  • Please log in to reply
11 replies to this topic

#1
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100
Hi!

I've a big problem with my Liquid. After this phone was installing some updates in the evening it doesn't work the next day. It doesn't start..... :( So i pressed the reset-button under the battery and then it suddenly starts to vibrate continous, the 3 LED's on top were blinking all together and the screen was stil black.
This "button-combo's" didn't work. So i tryed to flash te OS....with ADT ...... it works until the massage appears " CHANGE MODE, PLEASE WAIT [Download mode => OS download mode]" I was waiting, but nothing happened.....?????
Meanwhile i have expanded the vibration-motor, because i thought this thing break while the battery loading process ( Battery is only loadig when i press this reset-button, but then it vibrates....blinking..... :( )
Malez doesn`t detect this mobile (waitng for device).
Is this a hardware or a software problem?
Thank you for some good ideas!
Here is a log from ADT:

//=======================================================//
//================== Debug Log Start!! ==================//
//=======================================================//
[Info] : Program version is : ACER Download Tool [Intra][Single] v3.100 (2009.10.27)
[Warning] : Process started in AMSS Download mode



[Info] : Get AMSS Download Port Start!
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM4
[Info] : Port for AMSS Download is : COM4
[Info] : Beginning to Open AMSS COM Port : UsbConnect()


-----------------------------------------------------------
--------------- [Info] : Hex file Start !! ----------------
-----------------------------------------------------------
[Hex] : Receiver thread is ready !
[Hex] : Transfer thread is ready !
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM4
-----------------------------------------------------------
------------- [Info] : Hex file Finished !! ---------------
-----------------------------------------------------------


-----------------------------------------------------------
---------------- [Info] : AMSS Start !! ------------------
-----------------------------------------------------------
[AMSS] : AMSS Receiver Ready !
[AMSS] : No matter the partition table is the same or diff, Restoration is always needed !
[AMSS] : AMSS Start !
-----------------------------------------------------------
--------------- [Info] : AMSS Finished !! -----------------
-----------------------------------------------------------


[Info] : Change mode Start! (AMSS Download to Fastboot mode)
[Info] : Command is ready. (AMSS Download to Fastboot mode)
[Info] : Close AMSS com port


sorry for my bad english!

POLO

Edited by Polomaik, 06 April 2013 - 05:37 PM.

  • 0

#2
Master_T

Master_T

    Addict

  • Members
  • PipPipPipPipPip
  • 591 posts
Can you enter recovery? (camera + volume- + power) What recovery do you have installed?


  • 0

#3
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100
I did anything, but, it doesn't do work. The screen is still black. OMG i`m hardly ready to throw this brick into my TV....;) WTF It must exist a solution to fix this problem....or even not..! No RECOVERY, no ......nothing.......!

  • 0

#4
Master_T

Master_T

    Addict

  • Members
  • PipPipPipPipPip
  • 591 posts
Ok, in that case you have to directly access the fastboot bootloader. To do this connect the usb cable, then:


If you are/were on a Foryo/Gingerbread build press and hold Camera, then press the "Back" soft key
If you are/were on Donut/Eclair build, press and hold Camera + "Back" softkey and press power

If you do it correctly a black screen with some text in white will appear. From there:

1)If you have Acer Download Tool stuck in phase "Rebooting in OS download mode" it will resume and complete the flash
2)IF ADT doesn't recognise the phone or you can't start the flashing procedure, you can install a recovery manually by opening a command prompt in the folder where you extracted the recovery and typing:


fastboot-windows.exe -i 0x0502 flash recovery recovery.img


If it flashes correctly, remove cable and battery, reinstert battery and you can enter recovery with "Camera + Voume - + Power

  • 0

#5
malez

malez

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 1,423 posts
  • Gender:Male
  • Devices:Acer Liquid - Galaxy S2
  • Twitter:@malez2000
Master t is righ. You can boot in bootloader mode with combo. Sorry cant write more due to forum bug. Contact me by mail if you want

  • 0
If you enjoy what i do, i would really apprecite that you place a little gift
Posted ImagePosted Image Follow me on twitter http://twitter.com/malez2000Posted Image

LCR-F(royo)
malez recovery 0.6.1

#6
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100

Ok, in that case you have to directly access the fastboot bootloader. To do this connect the usb cable, then:


If you are/were on a Foryo/Gingerbread build press and hold Camera, then press the "Back" soft key
If you are/were on Donut/Eclair build, press and hold Camera + "Back" softkey and press power

If you do it correctly a black screen with some text in white will appear. From there:

1)If you have Acer Download Tool stuck in phase "Rebooting in OS download mode" it will resume and complete the flash
2)IF ADT doesn't recognise the phone or you can't start the flashing procedure, you can install a recovery manually by opening a command prompt in the folder where you extracted the recovery and typing:




If it flashes correctly, remove cable and battery, reinstert battery and you can enter recovery with "Camera + Voume - + Power



....at first thx for helping....but it does't work! Where can i find this command prompt to flash it manually? i can't find a file with the name recovery.img. only a file named malezRecovery_0.6.2.img. tryed to flash this one but the message <waiting for device> appears! hmmm.....

Edited by Polomaik, 07 April 2013 - 09:03 AM.

  • 0

#7
tnciw

tnciw

    Newbie

  • Members
  • Pip
  • 9 posts
  • Devices:acer liquid a1
Did you install liquid's driver on your computer?? sorry for my bad English

  • 0
hello everybody. I'm using acer liquid a1(white). And don't laugh at my english.english is not my first lauguage.(I'm a Taiwanese)

#8
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100
Yes, drivers are installed. Could it be that the battery is damaged? Must i have a loaded battery to flash a new OS? Or works it wthout battery too? It always stops at the same time :CHANGE MODE, PLEASE WAIT [Download mode => OS download mode .... There must be a solution.....damn!!! :(

  • 0

#9
Daimao94

Daimao94

    Regular

  • Members
  • PipPip
  • 96 posts
  • Devices:Acer Liquid
When you have this message in ADT, try to unplug and replug the USB cable.

  • 0
Device : Acer Liquid A1 (rooted)
ROM : CM7.2 Remix V2
microSD : Swap : 256Mb / EXT : 128Mb / FAT32 : rest
Recovery : TWRP

I'm so sorry for my bad English : i'm French.

#10
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100
This method doesn't work. When i unplug and replug the USB-Cable the ADT does not response, the LIQUID also.....

  • 0

#11
Master_T

Master_T

    Addict

  • Members
  • PipPipPipPipPip
  • 591 posts
Replace this script with the one in your malez recovery folder.

Then connect the phone. send it in bootloader mode as I said above and when you see the black screen with white text on the liquid screen, double click the file you just replaced and it will flash recovery.

Edited by Master_T, 07 April 2013 - 05:07 PM.

  • 0

#12
Polomaik

Polomaik

    Newbie

  • Members
  • Pip
  • 6 posts
  • Devices:ACER S100
i never have seen any text on the screen since this problem, this is my problem... i can't interact with this phone....no way ( it must be a secret path anywhere to go,but this path has nobody found yet ...i think it's dead...but my intuition say there is a solution......i cant't believe this!

Greetz from Germany

Edited by Polomaik, 07 April 2013 - 06:48 PM.

  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users