Jump to content


Photo

How to flash ICS into The OSD

- - - - -

  • Please log in to reply
2 replies to this topic

#1
1744633361

1744633361

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:orange san diego & zte u950
Today i erased all data in my OSD,so it cannot in the android and stocked at "intel inside" now.(can get in fastboot and REC)
Now the trouble is how can i flash ICS into my OSD!
Thanks!

  • 0

#2
BlueMoonRising

BlueMoonRising

    Hardcore

  • Members
  • PipPipPipPipPipPip
  • 1,512 posts
  • Gender:Male
  • Location:Here, there and everywhere...
  • Devices:Orange San Diego, OSF

Today i erased all data in my OSD,so it cannot in the android and stocked at "intel inside" now.(can get in fastboot and REC)
Now the trouble is how can i flash ICS into my OSD!
Thanks!

1.Open windows task manager by pressing ctrl-alt&del and click on the processes tab and end any ADB processes.

2.Make sure the xolo update.zip(299MB in size) is in c:\sandiego\tools\bricked

3.Boot phone into fastboot by turning off and then back on holding the volume down button and the power button at the same time(you'll get a black screen with a blue android bot) and then connect it to the PC.

4.Go to c:\sandiego\tools and click on the command prompt shortcut.

5.Type: fastboot -i 0x8087 devices (to make sure the device is connected).
You may need to run step 5 a few times before the phone is recognised, just type it in the first time and if no success hit the up arrow and enter. Rinse and repeat until the device comes up.

6.Type: fastboot -i 0x8087 erase cache (wait till its finished). Be patient...

7.Type: fastboot -i 0x8087 flash update bricked\update.zip (now it will flash the update). Again be patient...

Don't try this with the Orange update.zip as you wont like the result.

  • 0
Whoever exalts himself will be humbled, and whoever humbles himself will be exalted.

Matthew 23:12

#3
1744633361

1744633361

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:orange san diego & zte u950

1.Open windows task manager by pressing ctrl-alt&del and click on the processes tab and end any ADB processes.

2.Make sure the xolo update.zip(299MB in size) is in c:\sandiego\tools\bricked

3.Boot phone into fastboot by turning off and then back on holding the volume down button and the power button at the same time(you'll get a black screen with a blue android bot) and then connect it to the PC.

4.Go to c:\sandiego\tools and click on the command prompt shortcut.

5.Type: fastboot -i 0x8087 devices (to make sure the device is connected).
You may need to run step 5 a few times before the phone is recognised, just type it in the first time and if no success hit the up arrow and enter. Rinse and repeat until the device comes up.

6.Type: fastboot -i 0x8087 erase cache (wait till its finished). Be patient...

7.Type: fastboot -i 0x8087 flash update bricked\update.zip (now it will flash the update). Again be patient...

Don't try this with the Orange update.zip as you wont like the result.


Thanks! I have solved as you post above
thank you !

  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users