ROM upgrade for the i-mate jasjar

[Guest Jeff Hriljac]

I tried to download the Latest ROM build for i-mate

Edited June 2, 2006 by Jeff Hriljac

[Guest Tech]

I think you maybe misleading the people when you write "OS upgrade" - please change to "ROM upgrade" :) just for the convenience of other users.

As for your problem - are you able to perform a hard reset?

[Guest Jeff Hriljac]

I think you maybe misleading the people when you write "OS upgrade" - please change to "ROM upgrade" :) just for the convenience of other users.

As for your problem - are you able to perform a hard reset?

Just tried it. It came up with "press 0" and went back to the Serial screen. I just re-tried the upgrade and it failed again (connection error 101).

[Guest Tech]

well I found this, give it a shot:

This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :

-Put yr device in bootloader Mode

-Disable USB in Active Sync

-Now connect woth USB cable and open mtty utility

-Select the "WESUSB... " port

-You shall see a blank white screen..press Enter to get "USB>"

-Then type ( as BUzz has informed) set 14 0

(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)

-Then I ran the ROM Upgrade directly(After enbabling the USB)

-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0

-I got them back to normal..

found this on some forum....

[Guest Jeff Hriljac]

OK, Thanks

Edited June 2, 2006 by Jeff Hriljac

[Guest Pondrew]

Moved to Pocket PC Help and Advice. If the problem still persists let us know... :)