Jump to content
gkalen

[ROM] [UNOFFICIAL CM11 - 4.4.4] CM11 KKblade V , Port from N909 to Blade V

Recommended Posts

I DON'T HAVE MUCH TO SAY

Its time for something really new

 

THANKS TO

MKEYWANG , who made this build for N909 ....CM11 sources here.. https://github.com/MkeyWang/android_device_zte_n909

VIPER520 , for Viper4android ... http://forum.xda-developers.com/showthread.php?t=2191223

FeelSoGood and Lorenc.billo for testing

 

SO , ITS TIME FOR BLADE V TO HAVE A TASTE OF ....

 

post-1041787-0-80562900-1415842432_thumb

 

 

LET'S GO FOR

 

CM11 KKblade V

 

CHANGELOG

Still the begining of this port , temporarilly only basic port , not much changes.

And as i'm bored writing i'll fill "changelog" section later ...

Gapps mini Included , don't need to flash gapps , though if someone needs more gapps he can use a 4.4.4 gapps zip.

 

BUGS

Front camera cancelled , does not exist , phone is like it doesn't support front camera.

As you can understand this rom is useless for users who uses front camera , hope to find a solution.

FMradio , isn't works

 

CM11 KKbladeV - v4

Changelog

No fix needed , sim card works at first boot.

 

ROM UPDATED TO , CM11 KKbladeV-v4 ( 03/10/2015 )

DOWNLOAD

CM11 KKbladeV-v4

http://www.mediafire.com/download/tppg1ciz5zgs3ml/CM11_KKbladeV-v4.zip

 

INSTALLATION

Boot into CWM recovery

Advanced/reboot recovery

Wipe data factory reset

Wipe cache partition

Advanced/wipe dalvik cache

Mounts and storage/format system

Install zip/choose zip from external sd card

After installation completed , choose ... reboot system now

Wait few minutes until rom boot

Enjoy CM11 !!!!!

 

OTHER CM11 Based ROMS

 

1. LiquidSmooth_KKbladeV

http://www.mediafire.com/download/j57f1bz87fmn6ns/LiquidSmooth_KKbladeV.zip

 

2. NameLess_KKbladeV

http://www.mediafire.com/download/t21shp8axnsd415/NameLess_KKbladeV.zip

 

3. PacRom_KKbladeV

http://www.mediafire.com/download/mnmdpht9um69npt/PacRom_KKbladeV.zip

 

4. SlimKat_KKbladeV

http://www.mediafire.com/download/ma8uvcr02yq7buy/SlimKat_KKbladeV.zip

 

SCREENSHOTS below ...

post-1041787-0-71150400-1423442462_thumb

post-1041787-0-45408600-1423442490_thumb

post-1041787-0-83942800-1423442504_thumb

post-1041787-0-82673700-1423442522_thumb

post-1041787-0-64121100-1423442541_thumb

post-1041787-0-07452800-1423442590_thumb

post-1041787-0-22782600-1423442616_thumb

post-1041787-0-56498400-1423442651_thumb

Edited by gkalen
  • Upvote 10

Share this post


Link to post
Share on other sites

Wonderful!Congratulations and thanks for your hard work on this rom!

Finally we have kitkat for this device :D
I want to test,but missing download link :( ("CM11_KKblade_V.zip")
Thanks again!
 
 
 

Share this post


Link to post
Share on other sites

I DON'T HAVE MUCH TO SAY

Its time for something really new

THANKS TO

The guy who made this rom for N909 .... http://ui.flydev.cc/thread-5915-1-1.html

FeelSoGood and Lorenc.billo for testing

SO , ITS TIME FOR BLADE V TO HAVE A TASTE OF ....

attachicon.gif06884218ph.png

LET'S GO FOR

CM11 KKblade V

CHANGELOG

Still the begining of this port , temporarilly only basic port , not much changes.

And as i'm bored writing i'll fill "changelog" section later ...

As you know the main and major problem was calls and messaging , to avoid this problem we must flash two roms instead of one.

So , Download BOTH Roms and Follow carefully "installation" section below

DOWNLOAD BOTH ROMS

1. UpdateToCM11 ... http://www.mediafire.com/download/8c5e5et5f2gt75m/UpdateToCM11.zip

2. CM11 KKblade V ...

INSTALLATION

1. Put Both zips in your sd card

2. Boot into cwm recovery

3. Advanced/reboot recovery

4. Wipe data factory reset

5. Wipe cache partition

6. Advanced/wipe dalvik cache

7. Mounts and storage/format system

8. Install zip/choose zip from external sd card

9. NOW you will flash first the "UpdateToCM11.zip"

10. After installation finished , choose , reboot system now

11. Wait untill rom boot (4-5min ) and complete setup wizzard.

12. Power of your phone.

13. Boot into cwm recovery

14. Advanced/reboot recovery

15. Wipe cache partition

16. Advanced/wipe dalvik cache

17. Install zip/choose zip from external sd

18. Now flash the second rom , "CM11_KKblade_V.zip"

19. After installation finished , choose , reboot system now

20. ENJOY CM11 !!!!!!!

Hmm interesting but i think this is not real cm 11!  Why? We need CWM 6.0.4.5 for install Android 4.4 roms !!!!

Share this post


Link to post
Share on other sites

Hmm interesting but i think this is not real cm 11!  Why? We need CWM 6.0.4.5 for install Android 4.4 roms !!!!

 

If this Rom source got TLS support then you are true, if not or removed than possible make install with an a old recovery with one hack on the source http://review.androidarmv6.org/#/c/6074/

Edited by fagyi

Share this post


Link to post
Share on other sites

Reporting for duty..

 

Battery seems ok (lasts about 1 day) but after each reset (if i reset) i lost almost 10%

Default camera gives FC (Using CameraZoom)

Having no external sd card gives error -2 (Please mount sdcard) - i have sd but tested without

 

In rest its all GooD

Share this post


Link to post
Share on other sites

Hmm interesting but i think this is not real cm 11! Why? We need CWM 6.0.4.5 for install Android 4.4 roms !!!!

If this Rom source got TLS support then you are true, if not or removed than possible make install with an a old recovery with one hack on the source http://review.androidarmv6.org/#/c/6074/

Guys , i'm so sorry but i don't know what do you mean by Fake or True ??????

I found the rom in chinese site , i have the link in first post , all i did is making the port for work to Blade V , i didn't build this rom from sources , it's easy to understand it if you read first post.

If you mean that this rom is a themed stock rom, then the man who did it, is unbelievable great guy , but it doesn't seem to me that this is a themed stock rom.

I own a Huawei U8800pro ( i make some roms for this phone , froyo , CM7 , Miui gb , GB , ICS ) , a month before i owned Blade V a guy made a kernel and build a cm11 rom , i can told you that i flash all Roms with old cwm recovery , even last cm11 , i just did the needed changes to updater.script for flash it with old cwm.

But i'm not sure about this rom , i just did all needed things to make this rom to work for our Blade V , personaly i don't give a s**t if its fake or not , i really don't care.

I repeat , i just found this rom and port it succesfully to BladeV , nothing more.

So , if it's fake or true , i don't care , all i care is that , if rom goes well if has bugs and if i can fix them.

Fake or Not , it seems just fine on my BladeV !!!!!!!!

I also don't think that anyone else cares about "Fake or True".

Though i would like an explanation about "true" and "fake" , i really don't know what the difference on this.

Best Regards !

Edited by gkalen
  • Upvote 2

Share this post


Link to post
Share on other sites

First post updated by adding CM11 KKbladeV rom zip !!!

Link of CM11 KKbladeV , which is the basic rom , will be change tomorrow.

This is just for test it !!!!!!!

Reporting for duty..

Battery seems ok (lasts about 1 day) but after each reset (if i reset) i lost almost 10%

Default camera gives FC (Using CameraZoom)

Having no external sd card gives error -2 (Please mount sdcard) - i have sd but tested without

In rest its all GooD

Camera works for me , front camera has the problem.

Battery is a bit strange , on next release hope it will go better.

Thanks for feedback, front camera bug allready added at first post , we keep on searching if there are more bugs , still can't find any other but it's too early , will see.

Edited by gkalen

Share this post


Link to post
Share on other sites

I have a question which kernel use this rom?

The kernel from chineze rom , which i extract it with cygwin kitchen , i replace zimage , i did some changes to default.prop and init.rc , added init.d support , repack it , flash it and works ..

Boot.img is now 4.70mb

Edited by gkalen

Share this post


Link to post
Share on other sites

The kernel from chineze rom , which i extract it with cygwin kitchen , i replace zimage , i did some changes to default.prop and init.rc , added init.d support , repack it , flash it and works ..

Boot.img is now 4.70mb

Here is a video with my Blade V running CM11. :D  :D  :D  :D  :D

 

  • Upvote 2

Share this post


Link to post
Share on other sites

Here is a video with my Blade V running CM11. :D :D :D :D :D

Great video man !!!!!

For sure this is a CM11 rom 4.4.4 ( even 4.4.4 gapps packages working great ) and i found also some other CM roms , but i can't download them.

I have a CM11 4.4.2 , it's from KonstaT build for Blade3 , i managed to make it bootable yesterday but it needs more job , i will continue tonight .

I'm still searching to find the best rom to port it , if it's possible to our BladeV.

I hope my new roms will be only for android 4.4 from now on.

Regards !!!!

Share this post


Link to post
Share on other sites

shame that I dropped this phone :(( good looks this ROM

yes.im using first version "clean" and i flashed gapps.works awsome..i dont need nothing more:D

thanks gkalen again!

Share this post


Link to post
Share on other sites

Thanks a lot guys , for testing this rom and for your kind words !!!!

Yesterday i try the 4.4.2 rom build from KonstaT , but unfortunately whatever i did rom is not working properly , though rom is booting , it has no wifi, bluetooth ,camera don't work and i give up with this , probably is related to kernel , our kernel's zimage is not compatible with KonstaT's rom so a lot of things doesn't work.

I was very tired now , because three nights , i'm working continiously on cm11 roms.

I need some rest , and i have a break with KitKat .. .. tonight .

So , tonight i will sleep , yeeeeaaaaah ...

And tomorrow i will start again.

As you can see , i don't have a Donate button , i can understand the difficulty of donating.

But i have to say that the "like" button is totally free , i made a lot of roms but i can count only 8-10 likes ( 2-3 likes on every rom ).

So What The F**k , hit the f*****g "like" button guys , it's FREE ..

Thanks to all of you again !!!!!!!

  • Upvote 7

Share this post


Link to post
Share on other sites

I tested it and still tets it.After installation everything has worked ok,except front camera and something lags.After a few hours of installation,rear camera has not worked and still now do not want to start.I restarted the phone, I took out the battery and still nothing.

 

 

post-1032732-0-31443700-1416044028_thumb

In AirDroid, the camera starts and can take pictures, but only in AirDroid. :blink:

post-1032732-0-80434400-1416045528_thumb

After restart few icons on the home screen missing,I put them back,reboot phone and..missing again and again and again :huh:

Before.

post-1032732-0-81629700-1416044976_thumb

After restart
post-1032732-0-86939400-1416045086_thumb
 

That's all for now.I will test it and will be back with opinions If we discover something errors.

I hope to come as soon as a stable update!

Best regards!

 
 

 

Share this post


Link to post
Share on other sites

For camera

Go to settings/applications/all/... find camera app , and delete data.

That's it , camera will work again.

For airdroid

I don't use it and i don't know , try to do the above ( delete camera data to make it work ) , and test it one more time please.

For launcher lag

I'm trying to to do something... will see...

For dissapearing app shortcut , i didn't face such a problem , i will check it though.

Next Update

Next update hope it will be a little better and avoid some small issues , though front camera it isn't work , you will not face any other problem , except that front camera is disabled now.

Front camera it isn't work but you will not face FC's cause there are no option for front camera.

Thanks for feedback !!!!!

  • Upvote 1

Share this post


Link to post
Share on other sites

For launcher lag

I'm trying to to do something... will see...

 

Seeder APK (From xda-developers) and no lag ..we can install it ..

Share this post


Link to post
Share on other sites

Seeder APK (From xda-developers) and no lag ..we can install it ..

Yes , this is good , but i change default launcher with KKlauncher from playstore and no more lags.

Maybe tomorrow or at least on monday i will update the rom , will see ....

Share this post


Link to post
Share on other sites

Yes , this is good , but i change default launcher with KKlauncher from playstore and no more lags.

Maybe tomorrow or at least on monday i will update the rom , will see ....

i think is not a good ideaa to change the original cm launcher..who want another can simply download 1 from play store!

  • Upvote 2

Share this post


Link to post
Share on other sites

For camera

Go to settings/applications/all/... find camera app , and delete data.

That's it , camera will work again.

For airdroid

I don't use it and i don't know , try to do the above ( delete camera data to make it work ) , and test it one more time please.

For launcher lag

I'm trying to to do something... will see...

For dissapearing app shortcut , i didn't face such a problem , i will check it though.

Next Update

Next update hope it will be a little better and avoid some small issues , though front camera it isn't work , you will not face any other problem , except that front camera is disabled now.

Front camera it isn't work but you will not face FC's cause there are no option for front camera.

Thanks for feedback !!!!!

Camera    -  After deleting data camera works.

App shorcut missing - Resolved.Disappeared app shortcut after reboot only app moved in SD-card,so I moved back to phone and now not missing.

Thanks!

 

 
 
 

Share this post


Link to post
Share on other sites

I have a problem with the ringing and sms it doesn't sound, also i can't change the ringing song :)

Rings are silent , you must change it and you will be fine.

Go to settings/sound/ ... you can change whatever you like.

EDIT

Tomorrow i will upload New update , it seems that works great now.

Edited by gkalen

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.