Guest Paul (MVP) Posted March 14, 2007 Report Posted March 14, 2007 [teaser]Just after the launch of Windows Vista, we reported that RUUs (ROM upgrades), do not work on the OS. Now, courtesy of sp3dev @ XDA-Developers, a solution has been found... and i've taken his basic instructions and posted them below with full screenshots and the very latest driver files extracted from ActiveSync 4.5. News page readers can find the 16-step (not as bad as it sounds!) walkthrough after the jump! :D P[/teaser] Before starting: Your device needs to be connected to the PC, and in BOOTLOADER mode. Step 1 of 16: Extract this zip file to a memorable location on your machine (e.g. the desktop). This is the Activesync 4.5 RTM USB driver. VistaRUU.zip Step 2 of 16: Run 'Windows Mobile Device Center', and click 'Connection Settings'. Step 3 of 16: Uncheck the 'Allow USB Connections' box, and select 'OK'. Step 4 of 16: Run 'Services' by clicking the Start Orb and typing 'Services', and ensure the 'Windows Mobile-based connectivity' and Windows Mobile 2003-based connectivity' services are started. If they are not, click the service name and press the 'play' button on the top bar. Step 5 of 16: Load 'Device Manager' by clicking the Start Orb and typing 'Device Manager'. Expand the 'Mobile devices' section and click the 'HTC USB Sync' (or similarly named) item. Step 6 of 16: Click the 'Action' menu and select 'Update Driver Software'. Step 7 of 16: Click 'Browse my computer for driver software'. Step 8 of 16: Click 'Let me pick from a list of device drivers on my computer'. Step 9 of 16: Click 'Have Disk'. Step 10 of 16: Click 'Browse', and browse to the location where you extracted the ZIP file in Step 1. Step 11 of 16: Double click 'wceusbsh.inf'. Step 12 of 16: Select 'HTC USB Sync' from the list, and click 'Next'. Step 13 of 16: Wait while your driver is installed. ;) Step 14 of 16: Run 'Task Manager' by clicking the Start Orb and typing 'taskmgr'. Then find the 'WMDC.EXE' item, and click 'End Process'. Step 15 of 16: Install your update! Everything should now run fine! You just need to bear in mind the final step when you want to start syncing normally again... Step 16 of 16: In 'Windows Mobile Device Center', re-enable the 'allow USB connections' checkbox you disabled in Step 2.
Guest Confucious Posted March 14, 2007 Report Posted March 14, 2007 Great - Now I won't have to use my server! Thanks for the heads up Paul.
Guest smeg36 Posted March 14, 2007 Report Posted March 14, 2007 I got to step 5, but there was no Mobile devices section in my Device Manager.
Guest Confucious Posted March 14, 2007 Report Posted March 14, 2007 I got to step 5, but there was no Mobile devices section in my Device Manager. Was your device plugged in?
Guest Paul (MVP) Posted March 14, 2007 Report Posted March 14, 2007 I got to step 5, but there was no Mobile devices section in my Device Manager. I missed a point! I'll add it now ;) P
Guest Paul (MVP) Posted March 14, 2007 Report Posted March 14, 2007 Added: Before starting: Your device needs to be connected to the PC, and in BOOTLOADER mode. ;) P
Guest dan13l Posted March 19, 2007 Report Posted March 19, 2007 Well, I worked through all the steps, but I just get: ROMUpdateUtility MFC Application has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Any ideas? Might try rebooting and doing it again...
Guest boy_de_ghet Posted March 22, 2007 Report Posted March 22, 2007 (edited) I have try all case this above, but it not work. My Vista is still show message "ROMUpdateUtility MFC Application has stopped working". However, I'm installed Virtual Machine (Parallels or VMWare Machine) on Vista and setup WinXP on this VM and setup MS Async 4.5 and Uprom good work. Note : Don't install Microsoft Virtual PC 2007, it not support USB port. Good Luck ! [email protected] Edited March 22, 2007 by boy_de_ghet
Guest haythams Posted March 27, 2007 Report Posted March 27, 2007 tried the process step by step but i have a err0r message :103 Rom Image file not found
Guest skeggo80 Posted March 30, 2007 Report Posted March 30, 2007 ? is this only for ruu software uppdating or is it for geting wmdc to work on ruu`s cant get this guide to work white my qtek 9000 running wm6 ruu ;)
Guest Monolithix (MVP) Posted April 3, 2007 Report Posted April 3, 2007 Seems to be working fine here.
Guest skeggo80 Posted April 8, 2007 Report Posted April 8, 2007 Seems to be working fine here. ;) whats working to sync in wmdc or update your mobile/pda white a new rom can`t get it to work wmdc don`t find my qtek 9000
Guest Monolithix (MVP) Posted April 8, 2007 Report Posted April 8, 2007 Ah this is just for updating. Theres no official WM6 ROM out for the 9000 yet so that may (possibly) be why you're having compatibility problems.
Guest skeggo80 Posted April 9, 2007 Report Posted April 9, 2007 Ah this is just for updating. Theres no official WM6 ROM out for the 9000 yet so that may (possibly) be why you're having compatibility problems. Thanks
Guest floepie Posted April 9, 2007 Report Posted April 9, 2007 Well, I worked through all the steps, but I just get: ROMUpdateUtility MFC Application has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Any ideas? Might try rebooting and doing it again... Strange...I get the same response with 1 ROM, but with another, it works fine.
Guest joeshaw92 Posted April 27, 2007 Report Posted April 27, 2007 THANKYOU SO MUCH!!! I had tried 2 update my SPV M1000, but i had bricked it, and wouldnt go any further than bootloader. Thanx so much i'm now runnin 2003se, and about to upgrade to 2005! :rolleyes: :P :D
Guest madjokeer Posted May 14, 2007 Report Posted May 14, 2007 i do believe this works for a 32-bit system but not the 64bit.. is there a usb driver for 64bit.. i found one on xda.. heres the link: http://forum.xda-developers.com/showthread...ista+64bit+mtty but the drive gives an error code 39 stating it cant install it
Guest Lorand Posted May 18, 2007 Report Posted May 18, 2007 Hello :P Many thanks for this topic, great ! But I have a little problem. If I uncheck the "Allow USB Connections" (Step 3), I can't see the section "Mobile devices" in my Device Manager (Sept 5) :rolleyes: Thanks for your help :D
Guest hooya Posted May 20, 2007 Report Posted May 20, 2007 I registered for this forum just for this tutorial. Thank you so much for those of you that did the research to make this possible!
Guest haythams Posted May 26, 2007 Report Posted May 26, 2007 thanx alot for this value added topic i've implemnted the steps and it was working fine but sudenly its not working even my PPC icon is vot listed in my computer when i connect the device alret sound is annoincing that my device is connected and even the connection arrows still cyrcling and WMDC screen appears confermiong connection established but after a little while gives me error ? after some search i discovered this in the device manager thanx a lot for ur concerns
Guest fabrr Posted May 28, 2007 Report Posted May 28, 2007 try with differet devices universal,trinity, hermes OK prophet and wizard it does't work many thanks :rolleyes:
Guest charly_mx Posted May 30, 2007 Report Posted May 30, 2007 I cant make it work. My RUU just crashes >(
Recommended Posts