Jump to content

How to backup the existing/original ROM?


Recommended Posts

Guest super-hornet
Posted

Hi there... New to this forum and still searching this forum to find whether the similar question has being asked and answered before.

The question I'm asking is:

How do I backup my existing ROM?

I just upgraded my Omnia i900 firmware to the latest of i900DXIA5/DZIA5. It is an official release from Samsung. I just read somewhere that it is advisable to backup the original ROM before updating the ROM. I didn't realize it can be backup.

SH

Guest Jedrek
Posted

Good Question,

I have PDA:i900DFHL1 Phone:i900XXHL1 (Australian Version) and I wouldn't mine to backup the ROM before flashing.

Jedrek

Guest lastnikita
Posted (edited)

here is a ROM dumper for i900.

It's only tested on a clean WinXP computer :(

let me know if it works, and I will open a new topic for it.

I'm not sure yet how to reflash properly, but I've already reflashed using another os.nb as a base, I think it should be enough.

I did backup 2 files because I'm not sure yet which one I will use for the flash method. Both should contain your ROM.

Still trying to find how to flash back properly, but I miss time these days..

maybe at this time there will also be some problems with bootloader, because it's changed since the first ROMs..

note that it will only dump your PDA part, I didn't find how to dump the PHONE part nor the CSC

First install the .cab and reboot your device.

Then run the dumper on your PC and follow instructions.

Once done you should remove the cab (or flash your device !), as it adds a shortcut in startup to go to flight mode.

You can even not install it and modify the reg key by yourself.

I can upload a demo video if needed, but I don't think so B)

lastnikita_dumper_1.0.exe

lastnikita_unlocker.cab

Edited by lastnikita
Guest lastnikita
Posted

if you download and try, please leave feedback.

Guest bobobird
Posted

Excellent work there lastnikita, lets test this...

Guest cojox
Posted

Maybe paKo777 could help U with CSC part

Good work.

Guest bt1_bt2
Posted

hello,lastnikita

i have try your dump and it works but now how to flash, did you have a tool to do that?

thanks for your answser.

Guest lastnikita
Posted

hi, no spare time now but I'll try after I've released the new kitchen..

  • 3 weeks later...
Guest Edzz83
Posted

Hey mate, thanks for the dumper works a treat.

I can tell your pretty busy, but wondering if there was any update on restoring the backed up ROM.

Basically ive been having issues with reception on my i900 and tried a few things am thinking it may be hardware, in which case to get warranty i will need to re-flash with the backed up 'vendor' firmware.

No hurry at the moment tho still doing more research into the problem, will probably end up being carrier issues, they have not been to reliable recently.

Cheers ;-)

hi, no spare time now but I'll try after I've released the new kitchen..
  • 4 weeks later...
Guest aaak2000
Posted
if you download and try, please leave feedback.

hi lastnikita,

i have been trying to use your dumper but with no success.

the problem is that my omnia auto disconnecting from my pc after 3-4 min.

i belive that your dumper works fine and it just my omnia problem.

if you have any suggestions about how to make my omnia stay connected via usb

so i can dump it.

10x

Guest lastnikita
Posted

if you intend to flash it with another ROM after backup, then you may want to try a hard-reset.

if not, the first thing I'd try is doing it on another computer !

  • 2 weeks later...
Guest s0cks
Posted

Nice work lastnikita...

But how to extract .raw file? I mean, how to get csc, pda, xip... etc?

Thanks!

Guest apareja
Posted
here is a ROM dumper for i900.

It's only tested on a clean WinXP computer B)

let me know if it works, and I will open a new topic for it.

I'm not sure yet how to reflash properly, but I've already reflashed using another os.nb as a base, I think it should be enough.

I did backup 2 files because I'm not sure yet which one I will use for the flash method. Both should contain your ROM.

Still trying to find how to flash back properly, but I miss time these days..

maybe at this time there will also be some problems with bootloader, because it's changed since the first ROMs..

note that it will only dump your PDA part, I didn't find how to dump the PHONE part nor the CSC

First install the .cab and reboot your device.

Then run the dumper on your PC and follow instructions.

Once done you should remove the cab (or flash your device !), as it adds a shortcut in startup to go to flight mode.

You can even not install it and modify the reg key by yourself.

I can upload a demo video if needed, but I don't think so <_<

First off, thanks for your work.

Once endorsed the rom, as once again put on the OMNIA?

I already have files os.nb and Part02.raw the matter as Flash omnia with these files?

Thanks again

Sorry for my English pesimo :)

Guest erichkooi
Posted

HI,

I able to dump 2 files os.nb and part02. What should I need to do next to make it flashable to my phone back?

Please help.

First off, thanks for your work.

Once endorsed the rom, as once again put on the OMNIA?

I already have files os.nb and Part02.raw the matter as Flash omnia with these files?

Thanks again

Sorry for my English pesimo <_<

Guest lastnikita
Posted
But how to extract .raw file? I mean, how to get csc, pda, xip... etc?

can't remember right now if it's only possible.

I extracted a dumped ROM already, but I'll have to check the steps..

meanwhile, you can check xda-dev for more infos about all this !

ps: as I don't need it, I won't work on flashing the ROMs back unless I get much more spare time.... or good money <_<

  • 3 weeks later...
Guest bt1_bt2
Posted
can't remember right now if it's only possible.

I extracted a dumped ROM already, but I'll have to check the steps..

meanwhile, you can check xda-dev for more infos about all this !

ps: as I don't need it, I won't work on flashing the ROMs back unless I get much more spare time.... or good money ;)

Hello,lastnikita

Did you have any solutions to come back with the original dump (os.bin and Part02.raw) of the i900.Did you have any ideas?

thanks for your reply. :D

  • 1 month later...
Guest nismohks
Posted

the dumping tool crashes on me for some reason! restarted and redownloaded and all. still not working

also, how would i be able to restore the dumped rom back to my phone?

Guest nismohks
Posted

ok i tried another computer and its dumping now :)

however, how are you able to restore this dumped rom back on the phone??

Guest alexspires
Posted

lastnikita will be our super-hero making a "lastnikita_flasher"....

I did the backup and waiting for a solution to flash it back to the i900L.

  • 2 weeks later...
Guest Bl2OCK
Posted (edited)

I backed it up too. waiting for how to flash it.

Edited by Bl2OCK
Guest Mularovsky
Posted

Dear friends, any solution to this problem?? How to flash the dumped rom? Thanks in advance

Guest previa
Posted

Yes, I also need to know how to flash the ROM back to the Phone ? Many thanks :D

  • 2 months later...
Posted

the dumper doesnt work for me as I get astrix after the 0x

so seems like there was no address found.... which cannot be right

  • 5 weeks later...
Posted

Interesting, I have done the dump as well. Worked fine and was easy to do.

However, there is no way to restore it from this dump so far. (I don't see any replay that does it)

Adding a 'restore rom' would be awesome.

Thanks.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.