Guest kriskin Posted May 30, 2004 Report Posted May 30, 2004 spv e200 how do u get back to factory settings to remove security such as phone lock
Guest martin Posted May 30, 2004 Report Posted May 30, 2004 Try a hard reset which should also clear the device lock :) Note that phone will take longer to boot after a hard reset (several minutes). Also make sure your battery is not to low before the reset.
Guest kriskin Posted May 30, 2004 Report Posted May 30, 2004 Try a http://smartphone.modaco.com/viewtopic.php?p=97945#97945>Hard Reset which should also clear the device lock :) Note that phone will take longer to boot after a http://smartphone.modaco.com/viewtopic.php?p=97945#97945>Hard Reset (several minutes). Also make sure your battery is not to low before the reset. 7. Turn off the SPV. 8. Hold the 'Voice Memo' button down while turning on the SPV. 9. Press and hold the Action button (joystick middle button) for 2 seconds as instructed. 10. Press 8 to select 'Erase IPSM data'. done this on screen its just come uo with smart phone v1.03 doc in red green blue at bottom its say serial
Guest Disco Stu Posted May 30, 2004 Report Posted May 30, 2004 On the E200 you can use the Clear Storage function which does the same thing. Posted from my SmartPhone!
Guest martin Posted May 30, 2004 Report Posted May 30, 2004 On the E200 you can use the Clear Storage function which does the same thing. Do you have to get passed the device lock to activate Clear Storage ?
Guest kriskin Posted May 30, 2004 Report Posted May 30, 2004 Do you have to get passed the device lock for this ? yes m8
Guest Disco Stu Posted May 30, 2004 Report Posted May 30, 2004 Umm....X-( That's my second stupid post today ! Posted from my SmartPhone!
Guest martin Posted May 30, 2004 Report Posted May 30, 2004 Press 8 to select 'Erase IPSM data'. done this on screen its just come uo with smart phone v1.03 doc in red green blue at bottom its say serialThat's the canary screen which means you have failed to get into the bootloader menu. Only when you see 'Press any key to enter bootloader' do you press and hold the action key down. If you accidently press any other key or press the action key too early then you will get the canary screen. Some people find it easier with the SD card inserted. Umm....X-( That's my second stupid post today ! Hee Hee, Blame it on the sun 8)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now