No bluetooth hardware is installed on this device

[Guest Thomas_Ice]

Hello

I have problem. I bought a spv 200 and bluetooth not work. Start--Settings--Bluetooth-- and I see "No bluetooth hardware is installed on this phone". What's wrong?? Anyone help me?

[Guest mavisdavis]

try a hard reset mate by holding the record button whilst turning the device on..

Then select number 8 option (i think) its been a while since I owned an E200.

All the software is hard coded into the phone so it should re install itself.

Then grab hold of Smart explorer to be able to send stuff by bluetooth.

Oh welcome to the site:)

[Guest rodrigoperu]

hi, the hard reset should fix the problem like mavis said, however, the complete steps for a hard reset are as follows:

1: Power Off Phone

2: Hold down record button (for audio notes)

3: Power on Phone

message comes up: "press any key to enter boot loader"

4: Let go of record button

5: Push and hold down the joystick button

At this point, you're looking at a menu with 1->8 on it, select 8 and the phone should hard-reset.

If you end up at a red/green/blue screen, you've got it wrong, and you'll need to whip the battery off and start from scratch!

make sure you have your mms and gprs settings saved somewhere (or that they are available to download from somewhere, i.e. clubimate.com) and also your contacts... since all data will be lost from your phone.

Finally, after the hard reset the phone takes a little long to boot up again, don't get nervous and just give it time. After it reboots, it will then ask your permission to restart once again to finish the process. Do it, and then check for the bluetooth again. Good luck!

Edited May 7, 2005 by rodrigoperu

[Guest gpcarreon (MVP)]

Basically the same instructions on Tanager hard reset. Check out this video guide:

http://ccc.domaindlx.com/sp2002/hr.html

[Guest Thomas_Ice]

Ok. Very thanks!!! Bluetooth working now