Can somebody help me to configure WiFi connection with my PC and Qtek8310 ?

[Guest puoyui]

Can any of you guys guide me how to set up a WiFi connection between my desktop PC and Qtek8310.

My desktop is connected to the internet and I'd like to share this connection with my Qtek.

Apprecite your help !

Cheers,

[Guest Parre]

Just turn on the wfi and when it finds your network just made the same setup as you did on your computer.

[Guest jimbouk]

Just turn on the wfi and when it finds your network just made the same setup as you did on your computer.

Depends on whether you are using wifi to connect the laptop to the internet. If not, then you need to set your laptop's wifi connection settings up to share its internet connection, turn your wifi on in ad hoc mode, and then set your device up to connect to any access point or ad hoc network.

[Guest puoyui]

Depends on whether you are using wifi to connect the laptop to the internet. If not, then you need to set your laptop's wifi connection settings up to share its internet connection, turn your wifi on in ad hoc mode, and then set your device up to connect to any access point or ad hoc network.

Tried many things in configuration but failed. My desktop is connected to the internet. I can connect to my desktop via WiFi at least this is the status i can see on my Qtek - "connected".

However when I try to open a web site it says "check your connection settings"?

Can you guys guide me step by step what and how to set up on the desktop side as well as in my Qtek ?

I'd appreciate your help and patience ;-)

Cheers

Edited May 1, 2006 by puoyui

[Guest jimbouk]

Go to network settings and choose your lan connection (the one you connect to your router with). right click it, select properties, then go to advanced tab. Make sure internet connection sharing is enabled.

[Guest puoyui]

Go to network settings and choose your lan connection (the one you connect to your router with). right click it, select properties, then go to advanced tab. Make sure internet connection sharing is enabled.

Done...but now I get such a message while trying to open a web site on my Qtek "the page canot be found please try again later" ?? don't get it ...getting a bit frustrated

[Guest pedroms1]

Try do disable your firewall. If it solves the problem, you need to configure it.

Pedro

[Guest puoyui]

Try do disable your firewall. If it solves the problem, you need to configure it.

Pedro

it woooorks ...it wooorks ! finally....thanks a lot GUYS for all your help and suggestions !

[Guest conan_troutman]

ok ihave a question I have a wireless router conected to my adsl modem which in turn is connected to my laptop via a LAN cable

My qtek 8310 picks up the wifi signal conects for 5 second diss conects for 2 minutes conects for 5 seconds and repeats

I tried the right click on lan conaection select advanced but the only option thre is f or windows firewall no share internet coonnection

so can me phone connect directly to the router or do i need a wifi usb adapter and connect my phone to the adapter

this is really do ing my tree in now

[Guest pavankp]

ok ihave a question I have a wireless router conected to my adsl modem which in turn is connected to my laptop via a LAN cable

My qtek 8310 picks up the wifi signal conects for 5 second diss conects for 2 minutes conects for 5 seconds and repeats

I tried the right click on lan conaection select advanced but the only option thre is f or windows firewall no share internet coonnection

so can me phone connect directly to the router or do i need a wifi usb adapter and connect my phone to the adapter

this is really do ing my tree in now

I am able to connect my SP5 to the wifi router directly -- I don't see why the laptop is required. I remember there was a timeout in the phone wifi settings to conserve battery. That could be the reason for the disconnect. If you have any security/encryption on the wifi router and don't have those entered on the phone, you might get this behavior.

[Guest conan_troutman]

ok i figured it out what i need ed to do was encript the connection and create a pass key reboot both pc and smartphone and then open wifi the connectins was created automatically all i needed to do was authorise with wep key password

and bang up and running with wifi