Guest K Woodhead Posted February 11, 2008 Report Posted February 11, 2008 I have an un-locked TyTn II that has an annoying screen problem. Two to three time per week, the touch screen will stop working. The device continues to function normally using buttons and/or the keyboard, but the touch screen function is dead. In every case, I have been able to revive the touch screen by using buttons to navigate to the screen alignment settings and then use my finger to scroll around the screen till it comes back to life. Once the screen alignment program comes back to life, I align the screen and go about my business. I have a fair amount of Spb software installed, but I had the same problem before installing any of the Spb software, so on the surface, I'm ruling that stuff out. I have Kaiser Tweak and Paul's Tweak installed. Any idea's would be greatly appreaciated.
Guest dolbe666 Posted February 12, 2008 Report Posted February 12, 2008 (edited) I have an un-locked TyTn II that has an annoying screen problem. Two to three time per week, the touch screen will stop working. The device continues to function normally using buttons and/or the keyboard, but the touch screen function is dead. In every case, I have been able to revive the touch screen by using buttons to navigate to the screen alignment settings and then use my finger to scroll around the screen till it comes back to life. Once the screen alignment program comes back to life, I align the screen and go about my business. I have a fair amount of Spb software installed, but I had the same problem before installing any of the Spb software, so on the surface, I'm ruling that stuff out. I have Kaiser Tweak and Paul's Tweak installed. Any idea's would be greatly appreaciated. its best to start uninstalling programs untill your problem is solved. but in your case you cant be sure when its going to happen next so all i can say is try remember what was the last thing you installed before it went like that. If you cant figure it out then it would be best to hard reset and try with less tweaking untill you figure out what made it go wrong in the first place. finding bugs within software compatibility issues can take time and its alot of trial and error untill you figure it out Edited February 12, 2008 by dolbe666
Guest mandt Posted February 12, 2008 Report Posted February 12, 2008 its best to start uninstalling programs untill your problem is solved. but in your case you cant be sure when its going to happen next so all i can say is try remember what was the last thing you installed before it went like that. If you cant figure it out then it would be best to hard reset and try with less tweaking untill you figure out what made it go wrong in the first place. finding bugs within software compatibility issues can take time and its alot of trial and error untill you figure it out Just to add to this, which I agree with, the last programs you installed will be at the top of the list in 'Remove Programs'
Guest K Woodhead Posted February 12, 2008 Report Posted February 12, 2008 Thanks for your responses. This problem, albiet not as frequent, was happening before I installed any Spb software. In fact, it happened when I only had both "Tweaks" installed on a "out-of-the-box" base system. You know, at first I thought it might be a hardware thing, because the first couple of times it happened, even a soft reset would not bring the touch screen back to life. But going into the screen alignment program has worked every time. This has to fall into the "head-scratcher" category.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now