Guest trevormuk Posted June 10, 2008 Report Posted June 10, 2008 Anyone else having problems witht the small LED in the earpiece? Mine does not seem to be working at all.. is there a menu option to switch it on/off? Could this be one of the bugs being fixed? Thanks
Guest Simon Desser Posted June 10, 2008 Report Posted June 10, 2008 Anyone else having problems witht the small LED in the earpiece? Mine does not seem to be working at all.. is there a menu option to switch it on/off? Could this be one of the bugs being fixed? Thanks Apparently that's not an LED, it's the auto backlight sensor :D Missed calls and texts show as a snazzy swirly light around the action button :o Unfortunately, though it seems there's no flashing signal for "in service" or bluetooth on :( Cheers Simon
Guest trevormuk Posted June 10, 2008 Report Posted June 10, 2008 Thank you very much .... Shame there is no led ...especially when charging. Cheers
Guest flight23 Posted June 11, 2008 Report Posted June 11, 2008 Thank you very much .... Shame there is no led ...especially when charging. Cheers Sorry but there is an LED. You got the diamond already? Then look into the manual (as PDF on the CD). Page 41: 1.11 LED alerts The buttons below the touch screen and the exterior edge of the Navigation Control which is an LED ring will light up in the following situations: Controls Light Behavior SEND button Light flashes when there is an incoming call. END button Light stays solid when there is an incoming call. Navigation Control The LED ring shows a “breathing” white light when the battery is being charged. The LED ring shows a solid white light when the battery is fully charged. The LED ring flashes a white light once when the battery level is low and reaches down to about 10%. The top and bottom parts of the LED ring flashes a white light twice when there is a new e-mail, voice mail, or meeting reminder. A white light goes around the LED ring counterclockwise twice starting from the top when there is a missed call or new SMS or MMS message. • • • • • The LED ring, HOME, BACK, SEND, and END buttons will flash a white light once when one of the buttons or Navigation Control is pressed.
Guest ateyercheese Posted June 12, 2008 Report Posted June 12, 2008 Yeah, they're not fantastically obvious or bright. still my task bar tells my all I need at a glance.
Guest shootydogthing Posted June 14, 2008 Report Posted June 14, 2008 Apparently that's not an LED, it's the auto backlight sensor :D Missed calls and texts show as a snazzy swirly light around the action button :o Unfortunately, though it seems there's no flashing signal for "in service" or bluetooth on :( Cheers Simon Wait what? I'm almost CERTAIN that Gears at Coolsmartphone's Touch Diamond review model had a network/bluetooth/GPS/wifi notification in the earpeice. Just the one. I could be wrong, and that WAS a pre production model, but still... try putting WiFi on and see what happened.
Guest Paul (MVP) Posted June 18, 2008 Report Posted June 18, 2008 Thank GOD if there is no annoying flashing LED! P
Guest Confucious Posted June 18, 2008 Report Posted June 18, 2008 but I like annoying flashing LEDs.....
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now