Guest pcbinternet Posted October 18, 2008 Report Posted October 18, 2008 Hello, Installed IGO 8 on my omnia and overall like it, but been using TOm Tom for quite a while now and use to the way it works. Having a problem with POIS, if i press the position button and then the info button it shows local POI'S which is what i expect, so for example it shows a shell petrol station close by and it also shows its on the map because i have set petrol stations to show, if however i go into the manage POI'S and then select shell it shows No Items. Is this normal? How can i delete a POI that is no longer there? Thanks Paul
Guest Neil5459 Posted October 19, 2008 Report Posted October 19, 2008 What you are seeing is normal! When you are in Manage POI/ Petrol/ Shell and you tap Edit, iGO looks for subfolders in the Shell POI group, not individual entries. As there are no subfolders, you get the 'No Items' message As far as I know, you cannot edit/remove the built-in POIs, so if you want to remove one of the supplied Shell stations, I think you are out of luck. You can only edit your own User POIs. I'm not sure if there are any external tools for removing redundant entries.
Guest pcbinternet Posted October 19, 2008 Report Posted October 19, 2008 Thanks very much for the reply Paul
Guest teixeira.vh Posted October 21, 2008 Report Posted October 21, 2008 Hi there, Im having problems on how ti running iGO 8 in Omnia, i install everything in sd card, but when i run iGO exe, it appears and disapears the image , and the program wont run... Any advice? Tryed also in landscape mode and dont work... I run iGO exe directly from the microsdcard, it returns: "a problem has occurred with iGO.exe" "Please tell Microsoft about this problem, at nos cost to you"?? Thanks in advance. teixeira.vh
Guest datafanatic Posted October 21, 2008 Report Posted October 21, 2008 (edited) Hi there, Im having problems on how ti running iGO 8 in Omnia, i install everything in sd card, but when i run iGO exe, it appears and disapears the image , and the program wont run... Any advice? Tryed also in landscape mode and dont work... I run iGO exe directly from the microsdcard, it returns: "a problem has occurred with iGO.exe" "Please tell Microsoft about this problem, at nos cost to you"?? teixeira.vh let me see your sys.txt file as that is the main cause of iGO8 issues. You also must ensure you have the correct data.zip for the Omnia's resolution. Unzip the data.zip and see if you have a folder called 400_240 and 240_400 in the ui_igo8 folder. If you don't, thats where your problem lies. Let me know if you need any more help Laterz DF :lol: Edited October 21, 2008 by datafanatic
Guest teixeira.vh Posted October 23, 2008 Report Posted October 23, 2008 let me see your sys.txt file as that is the main cause of iGO8 issues. You also must ensure you have the correct data.zip for the Omnia's resolution. Unzip the data.zip and see if you have a folder called 400_240 and 240_400 in the ui_igo8 folder. If you don't, thats where your problem lies. Let me know if you need any more help Laterz DF :lol: Hi there, Have unziped the "data.zip" and have to folders 400_240 and 240_400, but still wont run.. See please Sys.txt to find where the problem is. Thanks for your help. teixeira.vhSYS.TXT
Guest datafanatic Posted October 23, 2008 Report Posted October 23, 2008 Hi there, Have unziped the "data.zip" and have to folders 400_240 and 240_400, but still wont run.. See please Sys.txt to find where the problem is. Thanks for your help. teixeira.vh Ah, i see your problem. If you look at your sys.txt file, the application is looking for the folder 320_240 which is the wrong one for the Omnia's resolution. Change your sys.txt file to look like mine and you should be ok. This is how my sys.txt file is set out: [interface] skin="ui_igo8" resolution_dir="400_240" maxzoom2d=6000000 show_exit=1 vga=0 [rawdisplay] screen_x=400 screen_y=240 class="landscape" [map] 3d_max_tiltlevel=9000 [poi] enable_pois_before_080217=1 [debug] skip_eula=1 smart_2d=1 enable_roadshadow=1 [msnd] msnd.start=0 With this sys.txt file, iGO8 will always run in landscape mode. If you want it to run in either orientation, remove the lines in red. Hope this solves your problems (it should!) Laterz DF :lol:
Guest teixeira.vh Posted October 23, 2008 Report Posted October 23, 2008 Ah, i see your problem. If you look at your sys.txt file, the application is looking for the folder 320_240 which is the wrong one for the Omnia's resolution. Change your sys.txt file to look like mine and you should be ok. This is how my sys.txt file is set out: [interface] skin="ui_igo8" resolution_dir="400_240" maxzoom2d=6000000 show_exit=1 vga=0 [rawdisplay] screen_x=400 screen_y=240 class="landscape" [map] 3d_max_tiltlevel=9000 [poi] enable_pois_before_080217=1 [debug] skip_eula=1 smart_2d=1 enable_roadshadow=1 [msnd] msnd.start=0 With this sys.txt file, iGO8 will always run in landscape mode. If you want it to run in either orientation, remove the lines in red. Hope this solves your problems (it should!) Laterz DF :lol: Hello again, Still dont work... Look for my Sys.txt file, its just like yours. teixeira.vhSYS.TXT
Guest Mig-L - Bell Posted October 23, 2008 Report Posted October 23, 2008 I've installed Igo8 and it works fine... Just havo to launch it on portrait mode... If not it will give an error on some .bmp image...
Guest civilmanx Posted October 23, 2008 Report Posted October 23, 2008 Ah, i see your problem. If you look at your sys.txt file, the application is looking for the folder 320_240 which is the wrong one for the Omnia's resolution. Change your sys.txt file to look like mine and you should be ok. This is how my sys.txt file is set out: [interface] skin="ui_igo8" resolution_dir="400_240" maxzoom2d=6000000 show_exit=1 vga=0 [rawdisplay] screen_x=400 screen_y=240 class="landscape" [map] 3d_max_tiltlevel=9000 [poi] enable_pois_before_080217=1 [debug] skip_eula=1 smart_2d=1 enable_roadshadow=1 [msnd] msnd.start=0 With this sys.txt file, iGO8 will always run in landscape mode. If you want it to run in either orientation, remove the lines in red. Hope this solves your problems (it should!) Laterz DF :lol: I had the same problem and edited my sys file like yours datafanatic and sort out the problem. Thanks for sharing :D
Guest datafanatic Posted October 23, 2008 Report Posted October 23, 2008 (edited) Hello again, Still dont work... Look for my Sys.txt file, its just like yours. teixeira.vh Which sys.txt file did you modify, as there are TWO!! 1 is in the folder iGO8 on the storage card or My Storage, the 2nd is within Program Files/iGO8. Ensure that you change BOTH. If it still doesn't work PM me and we can sort it out without hogging a topic. Laterz DF :lol: Edited October 23, 2008 by datafanatic
Guest truce Posted October 23, 2008 Report Posted October 23, 2008 (edited) Here's the data.zip and the sys.txt: http://rapidshare.com/files/138505390/i900.rar with it you can start iGo8 in landscape or normal mode - you wont get an error! Greets.. Edited October 23, 2008 by truce
Guest robertut Posted November 6, 2008 Report Posted November 6, 2008 http://navngo.com/pages/global/eng/news_an...ng_eng_20081008
Guest ivanxxx Posted November 9, 2008 Report Posted November 9, 2008 Here's the data.zip and the sys.txt: http://rapidshare.com/files/138505390/i900.rar with it you can start iGo8 in landscape or normal mode - you wont get an error! Greets.. VERY NICE !! this one worked for me thank you! it is simpe, only I have changed files with rar included and it opens.. But 1 problem.. It finds gps on port 3 and also I am able to use google maps but on igo8, in main menu "route" is not active, also I dont have GPS statistics.. What is the problem, shoud I use GPS split kinda program?
Guest mementomori Posted January 10, 2009 Report Posted January 10, 2009 Here's the data.zip and the sys.txt: http://rapidshare.com/files/138505390/i900.rar with it you can start iGo8 in landscape or normal mode - you wont get an error! Greets.. ialso had the wrong data file and sys. so i tried and it seemed to work but then after startupscreen when loading main screen load fatal error occured in main tread... doesnt sound good adress: 0x000edfb4 exception: 0x80000002 does anyone have a solution?
Guest shadow_styled Posted January 17, 2009 Report Posted January 17, 2009 Hi i have instaled Igo8 my rom is DXHL3 and i have a smal problem when i enter the navigation menu in portrait mode on the top a litle space remains empty its black it dosen't fill in the screen in the settings menu it's in fullscreen just in the navigation menu it isn't dose somone know the problem? THX
Guest MrJoneswii Posted January 17, 2009 Report Posted January 17, 2009 ialso had the wrong data file and sys. so i tried and it seemed to work but then after startupscreen when loading main screen load fatal error occured in main tread... doesnt sound good adress: 0x000edfb4 exception: 0x80000002 does anyone have a solution? Do you have animation enabled in the IGO settings? If yes, turn it off
Guest Dante252 Posted January 18, 2009 Report Posted January 18, 2009 Hi! I have an Omnia, and an original Igo 8, which only has Eastern European maps in it... I'd like to expand my Igo's map library with some new ones, so could you help me how to do it? I have every map file on my PC, but simply copying them is not working... Thanks guys!
Guest artonio Posted February 5, 2009 Report Posted February 5, 2009 Do you have animation enabled in the IGO settings? If yes, turn it off How to turn it off? I get error just before main screen loaded. And it goes to today screen after click "ok" on error popup.
Guest MrJoneswii Posted February 5, 2009 Report Posted February 5, 2009 How to turn it off? I get error just before main screen loaded. And it goes to today screen after click "ok" on error popup. What's the error? did you download the SYS.txt file and data.zip file from this topic? http://rapidshare.com/files/138505390/i900.rar Also, make sure your change the SYS.txt file to match the destination of your IGO8 folder.
Guest artonio Posted February 5, 2009 Report Posted February 5, 2009 (edited) What's the error? did you download the SYS.txt file and data.zip file from this topic? http://rapidshare.com/files/138505390/i900.rar Also, make sure your change the SYS.txt file to match the destination of your IGO8 folder. Yes I changed SYS.txt in both locations, and data.zip file, but still before main screen load i get: Fatal error ocured in main thread. Address:0x000f481c Exception: 0x80000002 I checked folder name and it's ok. Edited February 5, 2009 by artonio
Guest MrJoneswii Posted February 5, 2009 Report Posted February 5, 2009 Yes I changed SYS.txt in both locations, and data.zip file, but still before main screen load i get: Fatal error ocured in main thread. Address:0x000f481c Exception: 0x80000002 I checked folder name and it's ok. Can you copy your sys file here?
Guest artonio Posted February 5, 2009 Report Posted February 5, 2009 Can you copy your sys file here? Here is my sys file.sys.txt
Guest MrJoneswii Posted February 5, 2009 Report Posted February 5, 2009 Here is my sys file. Change: [folders] app="%SDCARD%/iGO8" into: [folders] app="%SDCARD%\iGO8" This is only if you have the app installed on an SD card of course.
Guest bobobird Posted February 5, 2009 Report Posted February 5, 2009 It could be due to a wrong license file
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now