Guest davem1919 Posted October 26, 2008 Report Posted October 26, 2008 Could someone please tell me how to hard reset after ugrading the ROM cheers Dave
Guest Omnia_1 Posted October 26, 2008 Report Posted October 26, 2008 same as pre ROM upgrade, press and hold call+end then stick stylus and SR whilst continuing to press and hold call+end..... sometimes takes 5-10 seconds. Alternatively turn off Omnia, then whilst pressing and holding call+end turn on Omnia. I have also noticed that waiting until splash sceen and then press and hold call+end also works.
Guest Michael122w Posted October 26, 2008 Report Posted October 26, 2008 Could someone please tell me how to hard reset after ugrading the ROM cheers Dave Dave, If you start your phone normally and go through the set up stages, you will be able to use the Hard Reset option under the settings. Alternatively you can try the hardware reset, which is achieved by restarting your omnia, then while the first Samsung is on the screen, try pressing the two phone buttons at the same time. Michael.
Guest BosZMaN :- P Posted January 8, 2009 Report Posted January 8, 2009 Eureka! Yes it does work! 2 x's now and one after a firmware update to version i900DXHK3/DXHK3 (Singapore). Which I did earlier today. I had some how managed to put a pass I could not get right (how who knows). After several attempts and finally an 8 min. mandatory wait. I did it. My final solution was that I had to wait and keep device awake for time to pass. 8 long agonizing minutes~! 1. Wait till reset timer is elapsed and devices is awake. 2. press both call and end button (ie green and red) I didn't press too light or hard just normal. 3. Push stylus on soft reset and within 5-8 secs eureka format screen. 4. hit call button. This may not help every one but those with pass problems mab.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now