Guest elmariachy Posted April 8, 2009 Report Posted April 8, 2009 hi guys how can i include a new xip files to rom and is this the xip files that only added to the rom or there is a sys files also added plz i need the right stages to cook a new build .
Guest shokka9 Posted April 8, 2009 Report Posted April 8, 2009 (edited) 1. Obtain XIP.bin & SYS folder from wherever to make your build. The same build is the best bet. 2. extract pda.bin from any ROM, also use eboot.nb0, customer.csc & phone parts too to make ROM (in the end) 3. You should now have what you need. 4. Dump xip.bin to get XIP folder. Customise ROM here, then..... 5. To insert xip.bin into os.nb use this command - osnbtool -c os.nb 1 xip.bin 6. Use os.nb.new to buildROM when you are ready Thats it in brief terms. You need the right tools, the right XIP.bin, dump it, insert to os.nb. Customise ROM then build it. I probably missed something, but i am working my real job, in a Bank, so bear with me. There are many guides at xda, the proces is similar. The main problem is getting the SYS to fit (i dont do it :excl:. The bits above might help you? Sztupy's how to in the kitchen tells you how to do it, read that too, it may help. You can update one or the other (XIP & SYS), but it is best to do both. Edited April 8, 2009 by shokka9
Guest Ryrzy Posted April 8, 2009 Report Posted April 8, 2009 yes... but how to make xip.bin if i have only ROM/XIP directory with files in it... and os.nb.payload file...
Guest shokka9 Posted April 8, 2009 Report Posted April 8, 2009 not sure bro :excl: I dont do this, i just use what has already been done... stevenh knows how i think...PM him, say i asked you to :excl: Sorry guys, i am no expert (i will be in 12 months or so), but until then i rely on others to get the stuff i need to that stage. I understand you, but i cannot explain bro, coz i dont know. :excl:
Guest Ryrzy Posted April 8, 2009 Report Posted April 8, 2009 hehe :excl: stevenh dont reply on PMs :excl:
Guest koko5800 Posted April 8, 2009 Report Posted April 8, 2009 1. Obtain XIP.bin & SYS folder from wherever to make your build. The same build is the best bet. 2. extract pda.bin from any ROM, also use eboot.nb0, customer.csc & phone parts too to make ROM (in the end) 3. You should now have what you need. 4. Dump xip.bin to get XIP folder. Customise ROM here, then..... 5. To insert xip.bin into os.nb use this command - osnbtool -c os.nb 1 xip.bin 6. Use os.nb.new to buildROM when you are ready Thats it in brief terms. You need the right tools, the right XIP.bin, dump it, insert to os.nb. Customise ROM then build it. I probably missed something, but i am working my real job, in a Bank, so bear with me. There are many guides at xda, the proces is similar. The main problem is getting the SYS to fit (i dont do it :excl: . The bits above might help you? Sztupy's how to in the kitchen tells you how to do it, read that too, it may help. You can update one or the other (XIP & SYS), but it is best to do both. yes the problem is the sys files :excl: but stevenh get us the xip files thanks to him but from where we can get the Compatible sys files with this xip :excl: I do not know what to doØŸ & this is Some of the ways for porting the xipHow to port a XIP:Extract xip.bin from the build you want to port fromDownload Bepe's XIPPortExtract XIPPort to any folderThe folder should contain XIPPort.exe, pkgcommon.dll, and xip.bin you want to port.Run XIPProt.exePress "Dump xip.bin" - This will create an OUT folderPress "Make Pkgs"Open the OUT folder and you will find two folders: Files and ModulesCopy the contents of MSXIPKernel and MSXIPKernelLTK with each folder (Files and Modules) and paste them to /ROM/XIP folder and replace. (Note: Don't worry about copying the .txt files, they are not needed.)SourceHow to port a SYS folderOpen your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folderGo to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell So what is the path to follow :excl:
Guest s0cks Posted April 8, 2009 Report Posted April 8, 2009 But... again... I don't know where and how to get a new SYS folder... If I try to extract a CUSTOM ROM, I got "BETA, make your own rom"... So, how can I get the SYS for the most recent XIP? I really don't understand it... :excl:
Guest pepech Posted April 9, 2009 Report Posted April 9, 2009 But... again... I don't know where and how to get a new SYS folder... If I try to extract a CUSTOM ROM, I got "BETA, make your own rom"... So, how can I get the SYS for the most recent XIP? I really don't understand it... :excl: you need a donor for the packages XIP/SYS , from Rhodium for instance ; try to get a look at XDA , there are a lot of ported ROM , you have to PM the donor for the files , you can also PM Shokka , Sector , Khuanchai or drddko for theirs files which are already fitted for Omnia resolution
Guest smilegod Posted April 24, 2009 Report Posted April 24, 2009 Hello people im cooking my first rom using shokkas guide, but i cant complete this step :excl: (The CSC.BIN needs to be extracted before you can work on it. Rename CSC.BIN to customer.csc . This is essential. Now run i900_EXEcutor (double click it). You get the below image. Click the Customer_CSC tab as below; then the browse button (…). Locate and click Go.) I renamed CSC.BIN to customer.csc but i cant find it with i900_EXEcutor . Am i doing something wrong? Please reply :excl:
Guest shokka9 Posted April 24, 2009 Report Posted April 24, 2009 (edited) check ur pm bro...dont pm and post too bro...it's a little bit frustrating.. hope it helps u (the pm) :excl: laters take my IP and my info and see if you can get to me...:excl: i doubt it... Edited April 24, 2009 by shokka9
Guest DominikZ Posted June 3, 2009 Report Posted June 3, 2009 It may sound stupid, but how do I extract the xip.bin? Trying now for the fourth or fifth time to build a german 6.5 ROM, but i guess I have to port my own xip.bin. And by the way: Today was released a new German ROM, I extracted it in the meantime, but now I get two customer.csc's. I know that I don't need the second one for 6.5 but what if I want to create the whole original ROM, just without the version check. How to I assemble these two files? Thanks a lot
Guest shokka9 Posted June 13, 2009 Report Posted June 13, 2009 added SYOK to first post.... Dont shoot me if t doesnt work, but it should, please read his thread also....it will help you understand any issue with as removing some stuff can brick your Omnia. YOU HAVE BEEN WARNED!! Shokka9
Guest SilenoZ Posted June 17, 2009 Report Posted June 17, 2009 I set everything, that is indicated on a first page but my SYAKR doesn't start. appears only DOS window on a second... I extract my ROM in a folder \omnia-eng What should I connect to make my program work?
Guest shokka9 Posted June 17, 2009 Report Posted June 17, 2009 do you get an error?? It should work....if not....delete all of it SYAKR and download from the site...(sztupy's)
Guest dutchwii Posted June 17, 2009 Report Posted June 17, 2009 when use cab2pkg where to place the folder (named with various numbers and letters) when copy into the rom apps folder i get error can not find the folder when use makeROM.cmd
Guest SilenoZ Posted June 17, 2009 Report Posted June 17, 2009 (edited) do you get an error?? It should work....if not....delete all of it SYAKR and download from the site...(sztupy's) not work ;) I download from the site and again the same problem :D i've tried on my old computer and again the same problem... can it be because of using Windows XP, not Vista or 7 ??? Edited June 17, 2009 by SilenoZ
Guest SilenoZ Posted June 18, 2009 Report Posted June 18, 2009 who has some variants of solution of the problem?
Guest shokka9 Posted June 18, 2009 Report Posted June 18, 2009 try google, i am not responsible for the upkeep of his website. and the working of anything attached to it. The kitchen can be got from other sources. Please try to use some other forms of resources bro....people will not answer you and i have tried as much as i can. :D Good luck
Guest Nicklashidegard Posted June 25, 2009 Report Posted June 25, 2009 Just wanted to say thankyou to Shokka9 for a great guide and SztupY for some amazing tools (and everyone else involved !!!).. Just managed to to dissemble and re-assemble a rom , then dissembled and removed a few bits (only apps, not any core stuff).. Flashed the "new" rom and it works perfectly !!!!! :D Can't wait to start adding stuff, but i'm taking it one step at a time... following the guides word by word.. Thanks again, and i'll keep you posted on the progress...
Guest shokka9 Posted June 25, 2009 Report Posted June 25, 2009 thats the spirit Nicklas... start the way you going...learn to disassemble and reassemble...then remove stufff.... then add stuff. Progression....the problem with most noob chefs is they try to do what we can do for their first ROM... It is impossible, without getting help, the correct files, knowledge etc. Start simple and work up. The more you do it, the more you learn. I now have a kitchen for every build i do (21815, 21046, etc etc). So if i ever need a ROM no matter what build, the kitchen is ready to go! Good work bro....you can carry on for me :D M2D ROMs.....
Guest Nicklashidegard Posted June 25, 2009 Report Posted June 25, 2009 yeah, be a while before i'm there though ;) .. only done one 6.1 rom so far...with nothing added yet...lol Just gotto convince the wife to spend less time with her and more with the omnia (and she's not quite understanding :D )..
Guest shokka9 Posted June 25, 2009 Report Posted June 25, 2009 tru that.... thats one of the reasons i dont cook as much....to be honest i would rather spend time with my GF & kids than cook ;) But cooking is coolio...its a case of prioritise your life. :D
Guest DominikZ Posted June 27, 2009 Report Posted June 27, 2009 (edited) Is anybody else getting now a Virus alert concerning PKGTool.exe? :D It worked fine My Antivirus (Free-AV) says that the file hast some regocnition patterns of the Worm: WORM/Hteibook.D It's pretty annoying. Edited June 27, 2009 by DominikZ
Guest Nicklashidegard Posted June 30, 2009 Report Posted June 30, 2009 i'm getting an error (on two consecutive rom's!!). When dumping os.nb onto buildrom.cmd, it "builds" the rom ok, but at the end (before you get done and close the grey window to start building the rom) i keep getting "external component has thrown an exeption" (this is when it says "creating initflashfiles.dat" in the grey window, after all the customizing).. Any idea what i'm doing wrong? Never had it before but all of a sudden it's started..
Guest omniacwazy Posted July 1, 2009 Report Posted July 1, 2009 Building ROMs for Dummies (i900 Omnia). See attached file for full guide Requirements .net framework 1.1 SP1; http://www.microsoft.com/downloads/details...;displaylang=en .net framework 2.0 SP1; http://www.microsoft.com/Downloads/details...;displaylang=en .net framework 3.5 SP1; http://www.microsoft.com/downloads/details...;displaylang=en MV C++ 2005 redistributable; http://www.microsoft.com/downloads/details...;displaylang=en MV C++ 2008 redistributable; http://www.microsoft.com/downloads/details...;displaylang=en * * Good luck. Hi guys...i would like some help with learning to cook a ROM. I have done many flashes of ROMs onto my OMNIA i900 and the first time was really a leap into the dark, but ever since that, there was no turning back for me. Re the Net Framework, it is indicated as requirement to download all the above...my qn is...are they to be downloaded and then all to be installed? or downloaded and put into a folder for later use, eg to be included when finalising my own custom ROM? Wd appreciate all and any help rendered. Thanks.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now