Guest iygnim Posted February 5, 2009 Report Posted February 5, 2009 hi everyone, i'm currently using the i900 from singapore. my pda and phone versions are as follows: PDA: i900DXHH3/DZHH3, PHONE: i900DXHH3 i tried to upgrade my firmware according to the latest version available at samsung's website, DZHK3 (singapore), but the error "incorrect software version" popped up. i then tried changing my phone's preconfiguration but it was already set to "singapore". i also tried using the rom from the philippines DXHK3, but again i received the same error message. anyone have any idea what's wrong, and what remedy is there? thanks
Guest iygnim Posted February 6, 2009 Report Posted February 6, 2009 anyone have any ideas? i just tried it again and it still doesn't work with the same error message
Guest laplace Posted February 6, 2009 Report Posted February 6, 2009 anyone have any ideas? i just tried it again and it still doesn't work with the same error message When u tried the Philippines update did you remember to change the phone in the configuration to the Philippines?
Guest Nicholas Kyong Posted February 7, 2009 Report Posted February 7, 2009 hi everyone, i'm currently using the i900 from singapore. my pda and phone versions are as follows: PDA: i900DXHH3/DZHH3, PHONE: i900DXHH3 i tried to upgrade my firmware according to the latest version available at samsung's website, DZHK3 (singapore), but the error "incorrect software version" popped up. i then tried changing my phone's preconfiguration but it was already set to "singapore". i also tried using the rom from the philippines DXHK3, but again i received the same error message. anyone have any idea what's wrong, and what remedy is there? thanks Sorry, my english is not good. what windows version is used when you updated firmware ? Windows XP or Windows Vista ? I recommended you to use windows XP to update the firmware. Because I have seen much thread that inform windows vista is trouble when updated firmware.
Guest nvally Posted February 7, 2009 Report Posted February 7, 2009 I have made the upgrade one hour ago. Because I have windows vista on my laptop and I read that it is better to do that on windows xp, I tried to install vmware but didn't work for me. I download the official firmware from Samsung (Philippines), but before i changed the preconfiguration from Indonesia. To change preconfiguration settings: * Press the "dial" key to the left of the optical pad to bring up the dialer * With the onscreen keypad input *#1546792*# * Select 'Preconfiguration' * Enter code *#81230*# and select OK * Select "Singapore" with the default operator SingTel * Accept this, DEVICE WILL HARD RESET Also, I tried this method , but again no luck for me... maybe is useful, so i I download the official firmware for vista and I start the installation. Before check your usb connection. I bought my Omnia from ebay, so no warranty for me. I live in Canada. now my pda and phone version is: PDA: i900DXHK3/DXHK3, PHONE: i900DXHK3, the old one it was PDA: i900DXHG3/DXHG3, PHONE: i900DXHG3 :)
Guest iygnim Posted February 7, 2009 Report Posted February 7, 2009 Sorry, my english is not good. what windows version is used when you updated firmware ? Windows XP or Windows Vista ? I recommended you to use windows XP to update the firmware. Because I have seen much thread that inform windows vista is trouble when updated firmware. hi there, i only have a windows vista system so i'm afraid i can't use XP to update
Guest iygnim Posted February 7, 2009 Report Posted February 7, 2009 I have made the upgrade one hour ago. Because I have windows vista on my laptop and I read that it is better to do that on windows xp, I tried to install vmware but didn't work for me. I download the official firmware from Samsung (Philippines), but before i changed the preconfiguration from Indonesia. To change preconfiguration settings: * Press the "dial" key to the left of the optical pad to bring up the dialer * With the onscreen keypad input *#1546792*# * Select 'Preconfiguration' * Enter code *#81230*# and select OK * Select "Singapore" with the default operator SingTel * Accept this, DEVICE WILL HARD RESET Also, I tried this method , but again no luck for me... maybe is useful, so i I download the official firmware for vista and I start the installation. Before check your usb connection. I bought my Omnia from ebay, so no warranty for me. I live in Canada. now my pda and phone version is: PDA: i900DXHK3/DXHK3, PHONE: i900DXHK3, the old one it was PDA: i900DXHG3/DXHG3, PHONE: i900DXHG3 :) can i ask, which country's official firmware did you use? my preconfiguration is already set to singapore/singtel.
Guest d1mitrov Posted February 7, 2009 Report Posted February 7, 2009 can i ask, which country's official firmware did you use? my preconfiguration is already set to singapore/singtel. my phone was set to australia...changed preconfiguration to phillipines as i wanted to upgrade to tarril's rom, tried official update from samsung site and it sait incorrect version. than changed to singapore, tried again with the singapore version and it didnt work again....im pretty effin irrorated right about now!
Guest iygnim Posted February 7, 2009 Report Posted February 7, 2009 When u tried the Philippines update did you remember to change the phone in the configuration to the Philippines? i changed it to the philippines, which resulted in a hard reset, and then tried the update. once again, i got the same error message.
Guest iygnim Posted February 7, 2009 Report Posted February 7, 2009 what the.. my omnia's "my storage" folder was wiped when i did the hard reset..
Guest janice45 Posted February 7, 2009 Report Posted February 7, 2009 Help just went into phone withe the numbers to see where I was set (singapore or whatever ) got all the way past the press ok and it didn't bring me up to a selection it asked to continue .did I miss a step has anyone had that pop up I didn't want to go any farther for fear of starting something I could not reverse. This phone was supposedly flashed only for english My pda=i900dxhg3 phone=i908zhhh2
Guest kunheng Posted February 7, 2009 Report Posted February 7, 2009 hey guy, can sometime tell me the way to update rom with vista, i know all u guy usually update with XP, but my pc us vista, so dn't no what to do. my PDA is DXHK3, it's philipinese......... thx
Guest nvally Posted February 7, 2009 Report Posted February 7, 2009 can i ask, which country's official firmware did you use? my preconfiguration is already set to singapore/singtel. I download the official vista firmware from Samsung (Philippines), but before i changed the preconfiguration from Indonesia.
Guest iygnim Posted February 8, 2009 Report Posted February 8, 2009 I download the official vista firmware from Samsung (Philippines), but before i changed the preconfiguration from Indonesia. which means you downloaded the philippines firmware, and successfully updated your omnia with preconfiguration set to indonesia? right now, i've lost all my files on my storage thanks to the hard reset, even though i was assured that my storage card and my storage would be untouched. to make matters worse, i still can't update my firmware, which means the hard resets were pointless to begin with. really hope someone has a solution to this..
Guest d1mitrov Posted February 16, 2009 Report Posted February 16, 2009 anyone find any solution to this problem yet???
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now