s2u2 1.50d - Password Lock and Backlight problems

[Guest GodsGift]

Hi guys,

Hope someone can help me. Just downloaded and installed the new 1.50d version of s2u2 and am loving the new animations and password protection .....BUT ....

on my Omnia i900 when I unlock the phone and the password screen is presented my backlight is off. Then as I press the password numbers it momentarily flashes on for each one.

When the password is accepted s2u2 closes but leave my Omnia with the backlight off and s2u2 still covering the task bar at the top of the screen.

I've tried playing with the s2u2 settings and my power settings but nada.

Cheers,

GG

[Guest Daugvolf]

Hi guys,

Hope someone can help me. Just downloaded and installed the new 1.50d version of s2u2 and am loving the new animations and password protection .....BUT ....

on my Omnia i900 when I unlock the phone and the password screen is presented my backlight is off. Then as I press the password numbers it momentarily flashes on for each one.

When the password is accepted s2u2 closes but leave my Omnia with the backlight off and s2u2 still covering the task bar at the top of the screen.

I've tried playing with the s2u2 settings and my power settings but nada.

Cheers,

GG

Turn off Haptic Feedback. I've noticed with a lot of apps that their vibrate/haptic feedback functions cause the Omnia's backlight to go crazy. I think the Omnia is an oddball in that it's vibrate/backlight ports are interchanged.

[Guest snrsuave]

I am having the exact same issue except I don't use the password lock. I just slide to unlock but the backlight turns off as well. It didn't do this in past versions. I will try and see if turning off the haptic feedback will help, but that is not really the solution that I'm looking for.

Just tried it and it still turns off the backlight with haptic feedback turned off.

[Guest GodsGift]

Turn off Haptic Feedback. I've noticed with a lot of apps that their vibrate/haptic feedback functions cause the Omnia's backlight to go crazy. I think the Omnia is an oddball in that it's vibrate/backlight ports are interchanged.

Genius! ta thanks very much.

Should have sussed that as the backlight was flashing when I would have expected vibration

Cheers.

Now I have a bug free s2u2 (for the moment)

[Guest Jumba]

I've also been experiencing lots of problems.

First, try switching Caller ID off.

If that doesn't work, going back to a previous version seems like the only option until the bugs can be ironed out.

[Guest GodsGift]

I've also been experiencing lots of problems.

First, try switching Caller ID off.

If that doesn't work, going back to a previous version seems like the only option until the bugs can be ironed out.

Its ok, see my previous post ..... Daugvolf fixed it!

[Guest snrsuave]

It looks like the fix Daugvolf posted only works for the i900. I have the Verizon i910 and turning off the haptic feedback did not work for me. Just to be clear, you guys are turning off the setting at Start > Settings > Personal > Vibration > "Disable vibration for touch screen"?

[Guest Daugvolf]

It looks like the fix Daugvolf posted only works for the i900. I have the Verizon i910 and turning off the haptic feedback did not work for me. Just to be clear, you guys are turning off the setting at Start > Settings > Personal > Vibration > "Disable vibration for touch screen"?

I have an i910.

The Haptic Freedback option is under the S2U2 Settings screen.

[Guest Adrynalyne]

That doesn't appear to fix the backlight staying dim after unlocking though :(

[Guest snrsuave]

I have an i910.

The Haptic Freedback option is under the S2U2 Settings screen.

Thanks! I wasn't even aware that there was such a setting in the s2u2 settings! I have turned off the option and it seems to have fixed the issue!

[Guest PuijkeN]

Nice just happend to notice this thread but was having the same problem. Backlight going nuts when using password protection, turned off haptic feedback and works like a charm at the moment! :( Happy me ! B)

[Guest FerdiBorbon]

Is it just me or when you lock and unlock the screen it seems laggy with the new version oppose to the older versions, perhaps its the new animation, also when going to the control panel and sliding up and down it seems laggier.

[Guest PuijkeN]

No problems here, works smooth as hell ! :(

[Guest kiagr]

Hi!

I have a problem with s2u2 to which I cant find a solution.

I´ve installed the app on my device mem, made a hard reset, but when i start it I get the background and status bar but not the actual "slider" to unlock the phone?! I have to make a soft reset to be able to get in to the phone again, and then uninstall it.

Same problem with every version I´ve tried.

I´ve tried google and checked the FAQ's on the download site, but nothing (or I'm just really bad at searching :()

Anyone got an idea of what the problem might be?

Its a i900 16GB

PDA: XBHJ2/XBHJ1

phone: XBHI3

[Guest nickmoutia]

Hi!

I have a problem with s2u2 to which I cant find a solution.

I´ve installed the app on my device mem, made a hard reset, but when i start it I get the background and status bar but not the actual "slider" to unlock the phone?! I have to make a soft reset to be able to get in to the phone again, and then uninstall it.

Same problem with every version I´ve tried.

I´ve tried google and checked the FAQ's on the download site, but nothing (or I'm just really bad at searching :( )

Anyone got an idea of what the problem might be?

Its a i900 16GB

PDA: XBHJ2/XBHJ1

phone: XBHI3

Are you sure you haven't got the "Hide all soft keys" option turned on in the appearance section?

Just a thought.

[Guest Majjo]

hi guys, I have just installed the latest version of s2u2 1.50d and I can't set any other clock than the clockA! I downloaded the other clock fonts from the site but nothing, works only the clockA! Any suggestions? I don't like the clockA!!!!! :(

[Guest kiagr]

Are you sure you haven't got the "Hide all soft keys" option turned on in the appearance section?

Just a thought.

B) Oh I sure feel stupid :( , thank you

[Guest FerdiBorbon]

i think 1.45 was better for me, can some one kidly post the cab here, as i deleted my old version, and the official site only has the latest.

Thanks

[Guest barbs666]

i think 1.45 was better for me, can some one kidly post the cab here, as i deleted my old version, and the official site only has the latest.

Thanks

I am using 1.5d and its pretty good, but does seem buggy when receiving calls and showing caller id..... 1.45 seemed pretty good (its attached)

also you can find most S2U2 versions here...... you may need to sign up???

http://forum.ppcwarez.org/search.php?keywords=s2u2&fid[]=0&sc=1&sr=topics&sf=titleonly

S2U2.zip

Edited March 8, 2009 by barbs666

[Guest Jumba]

Erm, that's a warez site dude.

[Guest barbs666]

Erm, that's a warez site dude.

yes it is, but the link is to FREEWARE and all the versions are there.(some of the link text it is not linked)

No need to panic..... :(