Guest qbus Posted March 4, 2009 Report Posted March 4, 2009 (edited) As promised I've created CAB with Big Volume Control UI from DXIA5 for ROMs that have it removed. 1. Install CAB. 2. Reset Omnia. There are two versions: - http://www.mediafire.com/?yghngk2ko3l - original behaviour - shows full screen volume control when tapping speaker icon on taskbar and on pressing volume hardware buttons - http://www.mediafire.com/?jjd4tmvgnzm - modified behaviour - shows full screen volume control only on pressing volume hardware buttons These CABs work fully only on i900. On i910 after installing them you loose posibility to rotate screen to 180 degrees.Samsung_Volume_Control_Buttons.cabSamsung_Volume_Control_Full.cab Edited April 22, 2009 by qbus
Guest taril Posted March 4, 2009 Report Posted March 4, 2009 As promised I've created CAB with Big Volume Control UI from DXIA5 for ROMs that have it removed (like Taril's). 1. Install CAB. 2. Reset Omnia. I haven't tested this CAB, installing it could cause your screen to stop responding until you do hard-reset. Use it at your own risk!! finally! I forward here a lot of ppl! Thank you! :(
Guest s0cks Posted March 4, 2009 Report Posted March 4, 2009 (edited) Thanks! I asked both of you about this cab! Thanks a lot! :( Edited March 4, 2009 by s0cks
Guest barbs666 Posted March 4, 2009 Report Posted March 4, 2009 As promised I've created CAB with Big Volume Control UI from DXIA5 for ROMs that have it removed (like Taril's). 1. Install CAB. 2. Reset Omnia. I haven't tested this CAB, installing it could cause your screen to stop responding until you do hard-reset. Use it at your own risk!! Thanks for making! but i wonder who will try this and risk hard resetting your phone?
Guest 'CJ' Posted March 5, 2009 Report Posted March 5, 2009 I have installed this cab. It works. Thank you
Guest barbs666 Posted March 5, 2009 Report Posted March 5, 2009 (edited) I have installed this cab. It works. Thank you installed and reboot. Now where do i find the control interface????? Edited March 5, 2009 by barbs666
Guest Michael122w Posted March 5, 2009 Report Posted March 5, 2009 (edited) As promised I've created CAB with Big Volume Control UI from DXIA5 for ROMs that have it removed (like Taril's). 1. Install CAB. 2. Reset Omnia. I haven't tested this CAB, installing it could cause your screen to stop responding until you do hard-reset. Use it at your own risk!! I am using Taril's latest rom at the moment. I have installed, rebooted the machine and still no samsung volume control B) Edit: Rebooted again and it worked perfectly!! Thanks Qbus - another great contribution :( Edited March 5, 2009 by Michael122w
Guest barbs666 Posted March 5, 2009 Report Posted March 5, 2009 installed and reboot. Now where do i find the control interface????? Had to uninstall, reinstall and then for some reason reboot twice, but it now works..... GREAT THX! :( so much better than the samsung version! DXIA5 rom
Guest nickmoutia Posted March 5, 2009 Report Posted March 5, 2009 Had to uninstall, reinstall and then for some reason reboot twice, but it now works..... GREAT THX! :( so much better than the samsung version! DXIA5 rom Will this work for all ROMS? Just before i try an install. I'm on M2D03 passoas rom thanjks nick
Guest MachinateTDK Posted March 5, 2009 Report Posted March 5, 2009 (edited) THANK YOU!!! :( but the soft volume icon, if you press it still show the old volume key. if you press the right edge of it, the bell volume shows up..hmmm B) but the hardware volume works fine. Edited March 5, 2009 by MachinateTDK
Guest khunjj Posted March 5, 2009 Report Posted March 5, 2009 "Reboot" is hard reset or soft reset? Thanks
Guest Michael122w Posted March 5, 2009 Report Posted March 5, 2009 "Reboot" is hard reset or soft reset? Thanks soft reset. :(
Guest MickyMax Posted March 5, 2009 Report Posted March 5, 2009 Thanks it's working fine with my XHIA1 :(
Guest qbus Posted March 5, 2009 Report Posted March 5, 2009 THANK YOU!!! :( but the soft volume icon, if you press it still show the old volume key. if you press the right edge of it, the bell volume shows up..hmmm B) but the hardware volume works fine. yeah - common issue - they don't calculate the volume icon in titlebar correctly. I've resolved this in my ROM but disabling big volume control when tapping volume icon - it only appears when you press volume up/down buttons. I'll probably do the same in the cab - this is the most sensible resolution in my opinion.
Guest qbus Posted March 5, 2009 Report Posted March 5, 2009 yeah - common issue - they don't calculate the volume icon in titlebar correctly. I've resolved this in my ROM but disabling big volume control when tapping volume icon - it only appears when you press volume up/down buttons. I'll probably do the same in the cab - this is the most sensible resolution in my opinion. Update in first post. Now the volume control acts exactly the same as in my ROM - tapping volume icon on taskbar opens standard Windows volume controller and pressing hardware buttons opens Samsung Big Volume Controller.
Guest sector Posted March 5, 2009 Report Posted March 5, 2009 you always keep impressing me bro :(. great job
Guest shokka9 Posted March 5, 2009 Report Posted March 5, 2009 Nice work qbus, you never stop bro!! Think i will add to my archive.... Thanks (again :()
Guest taitienitsa Posted March 5, 2009 Report Posted March 5, 2009 Works fine!!!!Thank you very very very very much qbus!!!
Guest silencer22 Posted March 6, 2009 Report Posted March 6, 2009 hihi is it possible to release the original cab tt launch full screen control from the taskbar? thx
Guest simonk12 Posted March 6, 2009 Report Posted March 6, 2009 As promised I've created CAB with Big Volume Control UI from DXIA5 for ROMs that have it removed (like Taril's). 1. Install CAB. 2. Reset Omnia. The CAB is being tested by users - it is working. thanks qbus!
Guest ktgohdt125 Posted March 7, 2009 Report Posted March 7, 2009 i got problem...... install first time and soft reset... nothing came out :( , try to uninstall but alwasy stuck there with " Samsung Big Volume Control CAB by qbus was not completely remove. Do u want to remove it from the list of install program...?" and still show at the Remove Program application. hope some can help... B) :P thanks & regards
Guest ronaldb3 Posted March 7, 2009 Report Posted March 7, 2009 Great for those who only want the Big Button. But I'll stick with the option to get either one just by going a different path. So I hope Qbus keeps both in his future Roms. IMHO Ron...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now