Guest xdalover Posted August 4, 2009 Report Posted August 4, 2009 IMHO, there is an before and an after of SRS WOW HD in listening music using headphones. As they say, SRS WOW HD provides improved audio for the Pocket PC. Unfortunately, the versions 1.2.1 and 1.4.1.0 doesn't work on TG01. I really miss it. It would be great finding one compatible version.
Guest katopunk Posted August 4, 2009 Report Posted August 4, 2009 IMHO, there is an before and an after of SRS WOW HD in listening music using headphones. As they say, SRS WOW HD provides improved audio for the Pocket PC. Unfortunately, the versions 1.2.1 and 1.4.1.0 doesn't work on TG01. I really miss it. It would be great finding one compatible version. Yes, I'm searching high and low for it also. It seems like all the versions are not able to run properly. It messed up with your phone's sound. After I installed it, there isn't any sound coming out from my phone.
Guest davideuck Posted August 4, 2009 Report Posted August 4, 2009 IMHO, there is an before and an after of SRS WOW HD in listening music using headphones. As they say, SRS WOW HD provides improved audio for the Pocket PC. Unfortunately, the versions 1.2.1 and 1.4.1.0 doesn't work on TG01. I really miss it. It would be great finding one compatible version. Hi, I've tried many versions, checked the reg keys(in many devices they have to be edited), but for now I've not found a working version. There's a video on youtube where SRS works perfectly on the TG01, but I don't know what version it is. A friend of mine has tried to contact the guy that posted that video but he doesn't answer :) So, if someone could try to find other SRS cab versions and post here, we can check the reg keys too and try to make it working.
Guest thespho Posted August 5, 2009 Report Posted August 5, 2009 (edited) hi all SRS WOW is works, but had problem. SRS_WOW_HD_121.A2DP.cab and WOWHD_ARM_CPanel.zip ( works ver.1.21, picked it up from xda. xda > G d > D and H > app SRS ) and u need change regi HKLM > Drivers > BuiltIn > WaveDev change "Flags" = dword:00010000 to "Flags" =dword:00010002 and reset. Problem is Bluetooth relations. ヽ(´Д`;)ノ set Bt headphone sometimes hang-up.. < ( was taught. blogs friend ) Im sorry, :) doesn't answer in youtube. Edited August 5, 2009 by thespho
Guest katopunk Posted August 5, 2009 Report Posted August 5, 2009 hi all SRS WOW is works, but had problem. SRS_WOW_HD_121.A2DP.cab and WOWHD_ARM_CPanel.zip ( works ver.1.21, picked it up from xda. xda > G d > D and H > app SRS ) and u need change regi HKLM > Drivers > BuiltIn > WaveDev change "Flags" = dword:00010000 to "Flags" =dword:00010002 and reset. Problem is Bluetooth relations. ヽ(´Д`;)ノ set Bt headphone sometimes hang-up.. < ( was taught. friend mao ) Im sorry, :) doesn't answer in youtube. hi spho, from japan. =) thanks for the tips. by the way, you got a very nice blog for t01a.
Guest thespho Posted August 5, 2009 Report Posted August 5, 2009 hi spho, from japan. =) thanks for the tips. by the way, you got a very nice blog for t01a. hi katopunk :) thank u to reply, Im counting on you and all !
Guest xdalover Posted August 5, 2009 Report Posted August 5, 2009 hi all - Many thanks dude!! You are the man!! Tested as you said and it Works!!! The second step will be the Bluetooth issue, but at least we can enjoy from "wired" music right now!!
Guest SinSilla Posted August 5, 2009 Report Posted August 5, 2009 hi spho, from japan. =) thanks for the tips. by the way, you got a very nice blog for t01a. Hey Katopunk, Hey Spho, could you share the Link to the T01A Blog? Or is it t-01a.windows-keitai.com? I´m regulary searching for T01A News as well, and i would love a reliable up-to-date source from japan. Greetings from Berlin, Sin
Guest xdalover Posted August 5, 2009 Report Posted August 5, 2009 Many thanks dude!! You are the man!! Tested as you said and it Works!!! The second step will be the Bluetooth issue, but at least we can enjoy from "wired" music right now!! Not at all!!!!! I've just tested with my Blutooth Headset Plantronics Voyager 855 (Highly recommended) and SRSWOW HD works PERFECTLY. I'm so happy.... Congratulations!!
Guest SinSilla Posted August 5, 2009 Report Posted August 5, 2009 I´m stuck here, what to do with the cpl file? :)
Guest xdalover Posted August 5, 2009 Report Posted August 5, 2009 I´m stuck here, what to do with the cpl file? :) I'm sorry, I don' understand Which cpl file? By the way SinSilla I'm guindos2003 from the spanish forum "todopocketPC" Pleased to hear from you here as well!
Guest katopunk Posted August 5, 2009 Report Posted August 5, 2009 I´m stuck here, what to do with the cpl file? :) At 1st, I'm not sure what to do with the cpl file. But it seems like it's pretty useless for me. As I couldn't load it. I just install the SRS_WOW_HD_121.A2DP.cab and modify the registry. The SRS WOW program is located on the phone system setting area. Not the program area.
Guest thespho Posted August 5, 2009 Report Posted August 5, 2009 (edited) I´m stuck here, what to do with the cpl file? :) hi sin ;) cpl files (/ 'o')/⌒ ○ \windows folder link share its shameful. Regards. ..... don't need cpl files?? ;) Edited August 5, 2009 by thespho
Guest SinSilla Posted August 5, 2009 Report Posted August 5, 2009 (edited) Thanks for the help guys, it worked, even without the .cpl file. :) But as a matter of fact, i had to hard reset my device for the first time after the installation. But that may very well be bad coincidence. I think it was due to my experiments with all the great apps, shells, tweaks and other customizations as well as alpha beta and final software. Today my phone all of a sudden went off several times, the last time it stayed blank after i have entered the pin code. But now i know what i want and need on my TG01 and should have a fine running system again in a couple of hours. Kudos to the TG01 Folks from all over the world. ;) Edited August 5, 2009 by SinSilla
Guest salvy.c.83 Posted August 5, 2009 Report Posted August 5, 2009 Hello thespho! I had post on your youtube channel on behalf of Italian Toshiba development Forum portegeclub.it Thanks for the quick reply!
Guest davideuck Posted August 5, 2009 Report Posted August 5, 2009 (edited) Ok friends, thanks to all(expecially thespo for writing his finding here ;) ), I've modded a new SRS WOW cab file for our TG01, simply install and soft reset :angry: I've used another cab to start becouse I've tried the thespo solution but I had the same problem as Sinsilla, my TG01 didn't exit from stand-by mode, so I had to remove the battery and switch-on it again. With this version I've not encountered this problem yet, so I hope it'll work good for everybody ;) , the only difference is that this version has few options but I've tried to find the right way to increase the volume. Cab file attached, try it and report how it goes <_< , enjoy :)SRS_WOW_HD_121_TG01.CAB Edited August 5, 2009 by davideuck
Guest thespho Posted August 5, 2009 Report Posted August 5, 2009 hi salvy and david, Buona sera! removed my SRS WOW. and try your SRS WOW cab files. It reports neatly here. :) thank you all ( ゚∀゚ )
Guest justj Posted August 5, 2009 Report Posted August 5, 2009 I am using SRS WOW HD 1.5.1 and have no problem what-so-ever. Work great with iTECH Clip R35 Bluetooth Stereo Adaptor. But the position of the usb stereo adaptor on the side of the phone is really stupid. Also sometimes having issue use WIFI and Bluetooth together.
Guest salvy.c.83 Posted August 5, 2009 Report Posted August 5, 2009 (edited) I am using SRS WOW HD 1.5.1 and have no problem what-so-ever. Work great... why yuo not post here yuor cab? so we can try if there are difference and in improvment into this newest relase こんにちは Thespho! :) Edited August 5, 2009 by salvy.c.83
Guest davideuck Posted August 5, 2009 Report Posted August 5, 2009 (edited) Hi all again, I've done a second cab, I've updated the .cpl file, in this way we have new options and much improvements! Install the cab file, soft reset then go into settings > SRS WOW > TrueBass tab and set: Imput Gain = 0 Output Gain = 0 In this way your TG01 will ring really loooooud!! :)SRS_WOW_HD_121_TG01_V_2.CAB Edited August 5, 2009 by davideuck
Guest thespho Posted August 6, 2009 Report Posted August 6, 2009 (edited) hi こんにちは thank u david to new cab files :) I have a regrettable thing to say, ver2.cab had problem software runway. device.exe capture pic lnk. < non capisco niente my stuff is T-01A. (sorry justj ;) ) TG01.cab it works! ;) Buona giornata! thank u all (・∀・) Edited August 6, 2009 by thespho
Guest justj Posted August 6, 2009 Report Posted August 6, 2009 why yuo not post here yuor cab? so we can try if there are difference and in improvment into this newest relase こんにちは Thespho! :) Is it allowed here?
Guest davideuck Posted August 6, 2009 Report Posted August 6, 2009 (edited) hi こんにちは thank u david to new cab files :) I have a regrettable thing to say, ver2.cab had problem software runway. device.exe capture pic lnk. < non capisco niente my stuff is T-01A. (sorry justj ;) ) TG01.cab it works! <_< Buona giornata! thank u all (・∀・) Hi, this is strange, I don't have that problem on mine device. Does it appen always after installing the cab or does it appen sometimes?? On mine TG01, device.exe stays at 0.00 and the idle process stays around 86.00 that is absolutely normal. It could be another installed app in contrast with this cab. The only problem I've seen until now is that my TG01 rebooted itself some minutes after the cab installation, but it appened only one time, now it's running fine from this night. EDIT: anyway, I'm trying to find the best combination, I've downloaded other SRS cabs and I'm testing them now. I'll let you know how it'll go and if it'll be good I'll post here, obviously ;) Edited August 6, 2009 by davideuck
Guest katopunk Posted August 6, 2009 Report Posted August 6, 2009 hi こんにちは thank u david to new cab files :) I have a regrettable thing to say, ver2.cab had problem software runway. device.exe capture pic lnk. < non capisco niente my stuff is T-01A. (sorry justj ;) ) TG01.cab it works! ;) Buona giornata! thank u all (・∀・) Sorry off topic. thespho, based on the picasa picture you posted. May I know what theme are you using? I like the clean black look of it.
Guest thespho Posted August 6, 2009 Report Posted August 6, 2009 Hi, this is strange, I don't have that problem on mine device. Does it appen always after installing the cab or does it appen sometimes?? On mine TG01, device.exe stays at 0.00 and the idle process stays around 86.00 that is absolutely normal. It could be another installed app in contrast with this cab. The only problem I've seen until now is that my TG01 rebooted itself some minutes after the cab installation, but it appened only one time, now it's running fine from this night. EDIT: anyway, I'm trying to find the best combination, I've downloaded other SRS cabs and I'm testing them now. I'll let you know how it'll go and if it'll be good I'll post here, obviously ;) hi david and katopunk :) and all yes strangeeee <_< but Its ok now. I'm looking forward to future development and I can't wait to thats!! Sorry off topic. thespho, based on the picasa picture you posted. May I know what theme are you using? I like the clean black look of it. sorry off topic too. Of course, my theme is free from microsoft windows mobile site JP. theme name is METAL. go to microsoft windows mobile jp this site IE recommended. and you need Windows Live ID and WVGA Theme Helper. フリーテーマ free theme, ダウンロード download, サイン イン Sign in, If you like try it! in many free themes. dont forget! T-01A is TG01 enjoy ;) thank you all
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now