HOT HOT HOT Change ur Omnia to iPhone senstivity!

[Guest Sea-Breeze]

hello guys !

while surfing the net i passed by a page describes how to increase Omnia's display senstivity to even superpass the Capacitive screens and iphone touch response

!!!!!!!! i tried and works damn great !!!!!!!!!!!!!

open any regedit program

tab:

Hkey_Local_Machine

then tab

HARDWARE

then tab

TOUCH

in the lower menu

change

Click from 1250 to 3750

DownUp from 256 (or whatever its written) to 1550

then ok

Enjooooooooooooooooooooooooooooooooooooy ur magic touch !!!

SuperPassing iPHONE !!!!!! wooooooooooooooooooooooooooooooooowwwwwwww

MagIc !!! really Omnia rocks now with single smooth touch it RESPONDS !!!!!!!

TRIED AND WORKS LIKE CHARM ...... :angry: ;) :D

Edited August 24, 2009 by Sea-Breeze

[Guest yashgupta25]

Thanks Sea-breeze, but this way's been out since last year

[Guest Cutefox]

i tried this on sector's latest rom.. no difference so far.. possibly sector's rom is already pretty good on sensitivity.. plus you missed out devicemap in your post above..

[Guest euhics]

I tried, nothing changed, still less good than with the iphone...

[Guest gianton]

Tried no big difference in KC's ROM.

[Guest HellboyMC]

I think the updown thingy has to be reduced for better sensitivity, but click, i changed it to 3500 from 2000 and it is much much better, no where near iphone, but much better, a lot less pressure is needed than it used to. But i am sure it is better, maybe not that much cause my screen is getting worse and worse cause the middle needs a lot more pressure than other parts of the screen and i have to press harder and harder and this damages the screen every now or so even more as it already is, but none the less it has improved. Keep in mind that when u change that, u have to wait 30 seconds min and then make a soft reset or the change won't work.

[Guest Jumba]

downup should be set to a lower value. Mine's at 150 and working very well.

[Guest La Traviata]

downup should be set to a lower value. Mine's at 150 and working very well.

+1

[Guest semmtexx]

lol i bet you will still have to use you finger nail to scroll unless you like PRESSING hard on the screen. Quite tired of omnia's touchscreen lately. My thumb hurts...

[Guest HellboyMC]

lol i bet you will still have to use you finger nail to scroll unless you like PRESSING hard on the screen. Quite tired of omnia's touchscreen lately. My thumb hurts...

I can do everything with my fingers, except write messages, which i do with my finger nail, but i don't have to press hard, i have click on 3500 and downup at 100, works very well, except my semi ruined middle of the screen. I can still use my finger but have to press a bit harder.

[Guest shokka9]

my touch is soooo soft...and no finger nail!!

Get a new digitizer!! (aswell as reg hacks)

:D

[Guest semmtexx]

my touch is soooo soft...and no finger nail!!

Get a new digitizer!! (aswell as reg hacks)

:D

Are you using a screen protector?

[Guest HellboyMC]

my touch is soooo soft...and no finger nail!!

Get a new digitizer!! (aswell as reg hacks)

:D

Could you tell us what to change in registry so us with old digitizers can also improve our touch?

[Guest Omniaaddicted]

i was change my digitizer... now i use digitizer with vodafone logo and 8 GB on the top left side...

no big change...still need edit registry.

[Guest cheifkeiff]

Could you tell us what to change in registry so us with old digitizers can also improve our touch?

I had to send my i910 back in because i had to use my finger nail all the time your digitizer went bad from heat if it's still under warranty you can turn it in!

[Guest Sea-Breeze]

hi all again when i increased DownUp value the responce in up down scrolling and zooming through photos is much much faster and smoother also svrolling fotos with just a soft touch

i use original rom

JPIA3/JVHK2

its a new device now !

[Guest Sea-Breeze]

I tried, nothing changed, still less good than with the iphone...

what rom do u use ? may be try non-cooked ones it works great on JPIA3/JVHK2

[Guest jason07]

My screen has never given me any troubles. I changed a few reg value a while back which improved it very slightly (I think), but I've always been able to scroll/click with just a very light brush of the finger (no nail). Apparently the first Omnias came with sub-par digitizers, but there are new ones available on eBay. Have a look at the pinned topic - people have seen some really awesome results by replacing their screens... and you'll get rid of scratches too! :D

[Guest Rob V]

hi all again when i increased DownUp value the responce in up down scrolling and zooming through photos is much much faster and smoother also svrolling fotos with just a soft touch

i use original rom

Sorry for this long post, but wanted to share what I've learned about improving scrolling on my Omnia. First, I really dont think that the UpDown and Click registry settings impact touch sensitivity per se; the hardware digitizer panel determines this. As best I can figure, the registry settings control the delays before touch events occur -- so they affect responsiveness but not sensitivity.

The UpDown setting specifies the wait time (in milliseconds) between the moment your finger touches the screen and when the screen 'unlocks' to begin scrolling. So increasing this value just makes things worse! Like others, I currently run mine at 150 with very good results. The screen feels much more responsive, because you don't have to wait as long for movement to begin. I have experimented with Click as well, but haven't found that it makes any difference that I could notice.

It sounds like some of you are still running 6.1 ROMs? If smooth finger scrolling is important to you, there's just no way it's going to happen with 6.1 because MS didn't include native kinetic scrolling in 6.1. The only exception will be certain third-party apps like Resco's File Explorer that provide their own scrolling as part of the application. But native WM 6.1 menus and apps like Messaging have no kinetic scrolling at all. Samsung apparemtly tried to work around this by layering its own scrolling functionality into the 6.1 ROMs, but it's pretty awful (it's the feature that causes jerky one-lline-at-a-time scrolling, accompanied by loud clicking noises).

In WM 6.5, MS finally introduced true smooth kinetic scrolling system-wide. It's a huge improvement vs. 6.1. The only problem is that the cooked 6.5 ROMs necessarily use the original Samsung 6.1 ROMs as a starting point. Thus, the weird Samsung scrolling is still present -- and it completely overrides the goodness of the new kinetic scrolling. :D Several of us discovered a secret months ago, which is to simply install FTouchSL but do not activate it. When you run the FTouchSL install, it deactivates the Samsung scroller, partly by replacing Samsung's touch driver DLL. Because you're never going to actually use FTouchSL, you don't need to buy it -- just install the trial copy from the FTouchSL website and forget about it. Most of the cooks now burn the FTouchSL trial right into their custom 6.5 ROMs, and also lower the value of UpDown to 150. But remember, this all applies only to WM 6.5, and not to 6.1.

The combination of 6.5's native scrolling with lowering the UpDown registry key value will give you awesome scrolling. You may still find it preferable to use a fingernail (I generally "flick" with the top of my nail, not the edge), but it now requires only the very lightest touch. if I use my fingertip, I have to press a lot harder. Once you've experienced native kinetic scrolling in 6.5, you'll never go back to 6.1 again! :angry:

[Guest kennethchia]

hello guys !

while surfing the net i passed by a page describes how to increase Omnia's display senstivity to even superpass the Capacitive screens and iphone touch response

!!!!!!!! i tried and works damn great !!!!!!!!!!!!!

open any regedit program

tab:

Hkey_Local_Machine

then tab

HARDWARE

then tab

TOUCH

in the lower menu

change

Click from 1250 to 3750

DownUp from 256 (or whatever its written) to 1550

then ok

Enjooooooooooooooooooooooooooooooooooooy ur magic touch !!!

SuperPassing iPHONE !!!!!! wooooooooooooooooooooooooooooooooowwwwwwww

MagIc !!! really Omnia rocks now with single smooth touch it RESPONDS !!!!!!!

TRIED AND WORKS LIKE CHARM ...... ;) ;) :D

Thanks :angry: my screen very senstivity

[Guest ECRodent]

lol i bet you will still have to use you finger nail to scroll unless you like PRESSING hard on the screen. Quite tired of omnia's touchscreen lately. My thumb hurts...

Yea my thumbs hurt after texting a lot on this stinkin phone. Cant wait for the touch pro 2 on verizon.

[Guest Quang05BlkBoxsterS n Omnia]

Thanks :angry: my screen very senstivity

Oh boy here we go again. It IS ALL in your heads OK? NOTHING can make the i900 ALL thumb touch operation with either 6.5 or 6.1 or even the so claimed digitizer. Only replacing with either O HD or 2 will ALMOST do it (better or like a few others Touch HD, X1 or iphone).

Can't wait for Stantum to use its patent in resistive phone screen. What the hell taking them forever :D ?

[Guest ichkhan]

hello everyone please help me

I did as indicated

(HKEY_LOCAL_MACHINE)

(HARDWARE)

(TOUCH)

(and i changed 1250 to 3750)

I restart spa is

they the Does not Start

pleas help me pleas

thank you

[Guest ichkhan]

hello guys !

while surfing the net i passed by a page describes how to increase Omnia's display senstivity to even superpass the Capacitive screens and iphone touch response

!!!!!!!! i tried and works damn great !!!!!!!!!!!!!

open any regedit program

tab:

Hkey_Local_Machine

then tab

HARDWARE

then tab

TOUCH

in the lower menu

change

Click from 1250 to 3750

DownUp from 256 (or whatever its written) to 1550

then ok

Enjooooooooooooooooooooooooooooooooooooy ur magic touch !!!

SuperPassing iPHONE !!!!!! wooooooooooooooooooooooooooooooooowwwwwwww

MagIc !!! really Omnia rocks now with single smooth touch it RESPONDS !!!!!!!

TRIED AND WORKS LIKE CHARM ...... :angry: ;) :D

hello please help me

I did as indicated

(HKEY_LOCAL_MACHINE)

(HARDWARE)

(TOUCH)

(and i changed 1250 to 3750)

I restart spa is

they the Does not Start

pleas help me pleas

thank you

[Guest Sea-Breeze]

Sorry for this long post, but wanted to share what I've learned about improving scrolling on my Omnia. First, I really dont think that the UpDown and Click registry settings impact touch sensitivity per se; the hardware digitizer panel determines this. As best I can figure, the registry settings control the delays before touch events occur -- so they affect responsiveness but not sensitivity.

The UpDown setting specifies the wait time (in milliseconds) between the moment your finger touches the screen and when the screen 'unlocks' to begin scrolling. So increasing this value just makes things worse! Like others, I currently run mine at 150 with very good results. The screen feels much more responsive, because you don't have to wait as long for movement to begin. I have experimented with Click as well, but haven't found that it makes any difference that I could notice.

It sounds like some of you are still running 6.1 ROMs? If smooth finger scrolling is important to you, there's just no way it's going to happen with 6.1 because MS didn't include native kinetic scrolling in 6.1. The only exception will be certain third-party apps like Resco's File Explorer that provide their own scrolling as part of the application. But native WM 6.1 menus and apps like Messaging have no kinetic scrolling at all. Samsung apparemtly tried to work around this by layering its own scrolling functionality into the 6.1 ROMs, but it's pretty awful (it's the feature that causes jerky one-lline-at-a-time scrolling, accompanied by loud clicking noises).

In WM 6.5, MS finally introduced true smooth kinetic scrolling system-wide. It's a huge improvement vs. 6.1. The only problem is that the cooked 6.5 ROMs necessarily use the original Samsung 6.1 ROMs as a starting point. Thus, the weird Samsung scrolling is still present -- and it completely overrides the goodness of the new kinetic scrolling. :D Several of us discovered a secret months ago, which is to simply install FTouchSL but do not activate it. When you run the FTouchSL install, it deactivates the Samsung scroller, partly by replacing Samsung's touch driver DLL. Because you're never going to actually use FTouchSL, you don't need to buy it -- just install the trial copy from the FTouchSL website and forget about it. Most of the cooks now burn the FTouchSL trial right into their custom 6.5 ROMs, and also lower the value of UpDown to 150. But remember, this all applies only to WM 6.5, and not to 6.1.

The combination of 6.5's native scrolling with lowering the UpDown registry key value will give you awesome scrolling. You may still find it preferable to use a fingernail (I generally "flick" with the top of my nail, not the edge), but it now requires only the very lightest touch. if I use my fingertip, I have to press a lot harder. Once you've experienced native kinetic scrolling in 6.5, you'll never go back to 6.1 again! :angry:

Sir with respect to ur opinion

but still increasind DownUp value and i repeat increasing makes better effect ! i made mine 1000 ! and the page runs soooo fast even least scrolling makes move ..

am usin Wm6.1 IA3