(help)Camera problem

[Guest omnikers]

Guys,

Can u help me, what's going on my Omnia Camera application problem?

I press the shortcut button or try to klik it at Program menu, the Camera doesn't open, it is appera and keep it 'loading...' and then it back to home screen again..

What is the problem, can anyone tell me?

My Omnia version : DXHG3

[Guest awarner (MVP)]

Try a soft reset, it could be that you are low on system memory.

[Guest omnikers]

Try a soft reset, it could be that you are low on system memory.

I already try soft reset, but it still keep same like that..

Which did you mean system memory?

The memory for main is still 15 mb free and for program is still 54 mb free..

Any suggestion?

[Guest unwichtig]

i have this problem many times .. ;)

and many firmware s too ..

[ i not think that is the memory because : i have all the time + / - main : 91MB and program: 45 MB free ]

.. i have no idee what thats problem is .. put i make this ..

Omnia off - sim and sd cart remove .. cleaning the contacts .. put the parts back and restart .. ..

in 85% it works for me ..- an the last 15 % .. i repeat this till it works .. * ggg

its very strange und i not unterstand it

at last 3 days with new firmware : XGIC3 / BHICIL1 and phne part XXIB2 i have till this time no problems .. so i hope it comes no one more --.

( sorry for my very bad english ) :)

Edited December 29, 2009 by unwichtig

[Guest omnikers]

i have this problem many times .. ;)

and many firmware s too ..

[ i not think that is the memory because : i have all the time + / - main : 91MB and program: 45 MB free ]

.. i have no idee what thats problem is .. put i make this ..

Omnia off - sim and sd cart remove .. cleaning the contacts .. put the parts back and restart .. ..

in 85% it works for me ..- an the last 15 % .. i repeat this till it works .. * ggg

its very strange und i not unterstand it

at last 3 days with new firmware : XGIC3 / BHICIL1 and phne part XXIB2 i have till this time no problems .. so i hope it comes no one more --.

( sorry for my very bad english ) :)

I try what u did last couple minutes ago, but it still not work..

Any else any suggestion?

[Guest unwichtig]

:mellow: :( :D

Update :

I have the same fail as before -.-

I will start the camera .. it starts with blackscreen with "laden " [ german rom] and nothing hapens -.- One touch of the Power Bottom or the Sensor field , it will fall back the the main screen -.- a littel window open and no text inside .. all black --

I replaced the camera.exe , *.dll , and so one -.- but nothing changes

( sorry for my bad bad englisch .. <_< )

have one any idee ?

[Guest InsaneBG]

I have the solution for you. This issue has to do with a connector on the mobo of the phone - for some reason it partially disconnects, and causes the camera and/or speaker not to work. If it completely disconnects, you won't be even able to start the phone, but when partially disconnected - it only causes some hardware of the phone not to work - imagine physically removing those parts.

To fix it, you'll need to open the phone. Here's what I suggest you to do before actually doing that - only remove the back conver of the phone, and press hard where the SD card slot is - then try starting the camera while pressing that spot. If it starts, then you can be 100% sure this is the way to correct it. Even if it doesn't, you could still try opening the phone and trying to manually adjust the connector. In my case, it just won't stay put, so I banded some thin rubber on top of it, which gets pushed toward the connector by the back part of the phone (the one with the screws) which goes on top of it. This is what did it for me.

You should look for the "Omnia service manual". There, in the part "Disassembly and Assembly Instructions" (disassembly particularly), you only need to follow the first 4 steps, not further. If you are unsure which connector I am talking about, it is pointed in step 7.

[Guest unwichtig]

Thanks ..

I have tried this .. and over the conector a thin rubber for " more Pressing" . Cam is runing .. :P :(

Edited March 29, 2010 by unwichtig