i900 Phone Service does not start! PLS HELP!

[Guest downjones]

Guys I got a big problem!

I tried to flash my phone part with the phone.bin then when it was almost at 100% my pc screwed up and restarted!! Well the pda starts but it can not start the phone process anymore! I click on turn phone "on" and it nothing happens, it trys but thats all....

Now if I use originally extracted pda.bin; eboot.nb0; customer.csc and phone.bin from the official DXIA5.....open them with UMDL Grandprix v1.8.6 for XP, diactivate the "Allow USB connections" in ActiveSync and get following:

OnDeviceChange:DBT_DEVTYP_DEVICEINTERFACE

(1) Device name:6&22194588&0&1

PDA Device 1 detected.

---------------------------------------------------------------------------------------

PDA 1 starts downloading...

---------------------------------------------------------------------------------------

EBOOT will be written.

Total 1 PDA region(s) will be written .

PHONE will be written.

Don't plug it out until the label becomes blue!!!

---------------------------------------------------------------------------------------

(1) FlashImage : success!!

(1) Re-Boot device and Close USB port

(1) Wait for Re-Connecting Device.

(1) Wait for Re-Connecting Device.

(1) Wait for Re-Connecting Device.

(1) Device is Re-Connected.

(1) Re-Init. Success.

(1) FlashImage : success!!

(1) file handle (3b794c)

(1) FlashImage.PDA : success!!

(1) DownloadImagePDA.PDA : success

Downloading CSC...

CSC finished.

(1) Now Port is Matched id:0, g_nOpenPhonePort:0

(1) Change usb Success

(1) DL_MSG_PORT_OPEN_FAILURE- cnt <= 0 ---PORT OPEN FAILED! :D

PLEASE, WHO CAN HELP? :D

[Guest downjones]

AND THIS IS WHAT I GET WITH USDL Grandprix v1.5.2 for XP:

OnDeviceChange: DBT_DEVICEARRIVAL

-------------------------------------------------------------------------------------

PDA Device 1 ready to download!

-------------------------------------------------------------------------------------

PDA 1 starts downloading...

Don't plug it out until the label becomes blue!!!

-------------------------------------------------------------------------------------

PHONE will be written.

-------------------------------------------------------------------------------------

Downloading PHONE...

OnDeviceChange: DBT_DEVICEARRIVAL

KW.KIM Create retry(25)

KW.KIM Create retry(24)

KW.KIM Create retry(23)

KW.KIM Create retry(22)

KW.KIM Create retry(21)

KW.KIM Create retry(20)

KW.KIM Create retry(19)

KW.KIM Create retry(18)

KW.KIM Create retry(17)

KW.KIM Create retry(16)

KW.KIM Create retry(15)

KW.KIM Create retry(14)

KW.KIM Create retry(13)

KW.KIM Create retry(12)

KW.KIM Create retry(11)

KW.KIM Create retry(10)

KW.KIM Create retry(9)

KW.KIM Create retry(8)

KW.KIM Create retry(7)

KW.KIM Create retry(6)

KW.KIM Create retry(5)

KW.KIM Create retry(4)

KW.KIM Create retry(3)

KW.KIM Create retry(2)

KW.KIM Create retry(1)

KW.KIM Create retry(0)

Download failed!!

[Guest dannych99]

You should flash phone.bin part with Grandprix under XP with a laptop.

It seems the com port cannot be found!

Try use a phone.exe.

Hope you do not brick it. :D

[Guest downjones]

You should flash phone.bin part with Grandprix under XP with a laptop.

It seems the com port cannot be found!

Try use a phone.exe.

Hope you do not brick it. :D

so it doesn't work on VMware with WinXP? Thanks for the tip with the laptop, I will try and hope it works... :D

[Guest barbs666]

You should flash phone.bin part with Grandprix under XP with a laptop.

It seems the com port cannot be found!

Try use a phone.exe.

Hope you do not brick it. :D

hey mate could you detail how to use a phone.bin file and flash my phone part.

THANKS

[Guest dannych99]

so it doesn't work on VMware with WinXP? Thanks for the tip with the laptop, I will try and hope it works... :D

Yes, you can. I use VMware under Windows 7.

What i mean is that you could flash phone.bin only (donot need csc something).

hey mate could you detail how to use a phone.bin file and flash my phone part.

THANKS

Read this:

http://www.modaco.com/content/i900-general...00-omnia-phone/

:D

[Guest downjones]

Yes, you can. I use VMware under Windows 7.

What i mean is that you could flash phone.bin only (donot need csc something).

Read this:

http://www.modaco.com/content/i900-general...00-omnia-phone/

:D

Thanks, but I am not flashing now anything besides the PHONE.BIN ....and it does not work...it shows always this:

OnDeviceChange: DBT_DEVICEARRIVAL

-------------------------------------------------------------------------------------

PDA Device 1 ready to download!

-------------------------------------------------------------------------------------

PDA 1 starts downloading...

Don't plug it out until the label becomes blue!!!

-------------------------------------------------------------------------------------

PHONE will be written.

-------------------------------------------------------------------------------------

Downloading PHONE...

OnDeviceChange: DBT_DEVICEARRIVAL

KW.KIM Create retry(25)

KW.KIM Create retry(24)

KW.KIM Create retry(23).........

I also tried with my laptop, which has XP....but still the same error...it just does not recognize it as Samsung CDMA Modem.....not as any modem by fact.....it always says PDA Detected and when it trys to change usb to COM0 it restarts and gives an error (((

guys what now?! :D :lol:

1. ActiveSync is installed

2. Samsung Drivers installed

3. All apps are closed

[Guest dannych99]

I think you bricked your phone already according your first post.

Flashing phone part, lost power during flashing...

Have to send to service.

It's a pity.

[Guest downjones]

I think you bricked your phone already according your first post.

Flashing phone part, lost power during flashing...

Have to send to service.

It's a pity.

damn it.... this is what I was thinking......f***.........is there any force flash mode through SD memory hard???

[Guest g3n3ral]

try installing samsung modem driver find on modaco

[Guest downjones]

try installing samsung modem driver find on modaco

I already tried 5 different packages of Samsung CDMA USB modem drivers...and none of them recognizes my omnia.........does anyone know how to enter force flash mode by SD Card?

[Guest Mr. Sergey]

I had very similar trouble with you, I could not flash my phone part had the same reports of mistake. Than I open Activesync and checked thе check box "allow USB connection" (not sure about English version, I have Russian one). As a result I have successfully flashed my new Phone part. Hope my case helps you.