WinMo 6.5 downgrade to WinMo 6.1

[Guest kahleong888]

I've installed a custom 6.5 rom on my omnia i900

version

pda : i900dxid/28002

phone : i900dxia2

i wished to downgrade back to 6.1

as i did previously , i used dxia5 clear rom to do that on vmware ( from 6.1 custom rom flash back to original rom)

but this time, my phone was stucked at the 1st step "downloading e-boot" and i have to remove the phone battery and reboot the phone..

i have tried several time and still resulted the same

any recommend?

2nd prob, i coundnt open my camera.. when i click on the camera button or menu, the loading screen couldnt proceed to camera screen..

is it my hardware prob or software prob?

looks for recommend and solution please...thanks

[Guest lupus_hegemonia]

I've installed a custom 6.5 rom on my omnia i900

version

pda : i900dxid/28002

phone : i900dxia2

i wished to downgrade back to 6.1

as i did previously , i used dxia5 clear rom to do that on vmware ( from 6.1 custom rom flash back to original rom)

but this time, my phone was stucked at the 1st step "downloading e-boot" and i have to remove the phone battery and reboot the phone..

i have tried several time and still resulted the same

any recommend?

2nd prob, i coundnt open my camera.. when i click on the camera button or menu, the loading screen couldnt proceed to camera screen..

is it my hardware prob or software prob?

looks for recommend and solution please...thanks

Try to "flash" ANOTHER rom, looks like the file's corrupted...

[Guest jms2367]

or alternatively if you can use a winxp machine. flash the rom found in the link below:

http://www.pspmyspace.com/omnia/2009/04/dx...-clean-rom.html

this is the official DXIA5 pda, DXIA2 wm6.1 rom.

much safer to flash in a winxp machine. just make sure that the usual drivers are installed (samsung modem drivers and activesync) and all precautions in flashing a rom are followed,

[Guest lupus_hegemonia]

or alternatively if you can use a winxp machine. flash the rom found in the link below:

http://www.pspmyspace.com/omnia/2009/04/dx...-clean-rom.html

this is the official DXIA5 pda, DXIA2 wm6.1 rom.

much safer to flash in a winxp machine. just make sure that the usual drivers are installed (samsung modem drivers and activesync) and all precautions in flashing a rom are followed,

+1! I didn't thought that, right!

[Guest kahleong888]

thanks, i found my rom installer is corrupted.. problem is solved after i redownload new dxia5 rom <_< :mellow:

[Guest NarutoDKz]

U could also dissasemble a official rom and use GrandPrix.

That's what I did to get my original danish rom back, no problems so far.