Guest Yuking Posted March 30, 2010 Report Posted March 30, 2010 I found SetCPU may cause Liquid reboot frequently. When using its default setting (min:245,max:768), LCR-1.2.2/1.2.3/eclair-1.8.7/1.9 are all unstable according to my experience. I am told that SetCPU can save battery, so ... What do you think about it? are you using it? and what is your configuration? THX.
Guest emerald7086 Posted March 30, 2010 Report Posted March 30, 2010 been using the basic setting (min:245,max:768) with set on boot and on-demand profile, but so far no reboot and there's an option: powersaving, maybe you could give it a try
Guest Yuking Posted March 30, 2010 Report Posted March 30, 2010 been using the basic setting (min:245,max:768) with set on boot and on-demand profile, but so far no reboot and there's an option: powersaving, maybe you could give it a try Which rom are you using? Are you using memory mananger (such as advanced task manager/autokiller)?
Guest emerald7086 Posted March 30, 2010 Report Posted March 30, 2010 on LCR 1.2.3, with advanced task killer free and autokiller :P
Guest Yuking Posted March 30, 2010 Report Posted March 30, 2010 on LCR 1.2.3, with advanced task killer free and autokiller :( It is the same with mine exactly, but why my system is so unstable? Other software cause it? :P
Guest linuxluver Posted March 30, 2010 Report Posted March 30, 2010 (edited) I found SetCPU may cause Liquid reboot frequently. When using its default setting (min:245,max:768), LCR-1.2.2/1.2.3/eclair-1.8.7/1.9 are all unstable according to my experience. I am told that SetCPU can save battery, so ... What do you think about it? are you using it? and what is your configuration? THX. No stability problems here with SetCPU. It's kind of obvious how to set it up.....do you really need to ask? You choose liquid as your phone, then fill in the profiles - if you want to use them - and set CPU speeds for each being aware of what each is trying to achieve: Low power? Go slower. Charging? Charge faster by going slower. Battery too hot? Slow down. Actually using the phone right now with full battery? GO FAST. You need people to tell you this? *sigh*..... Also remember.....not much point slowing the CPU down if you run your screen at 100% brightness and have every wifi / GPS / bluetooth / 3G service running. There is more to battery than just CPU. Edited March 30, 2010 by linuxluver
Guest linuxluver Posted March 30, 2010 Report Posted March 30, 2010 It is the same with mine exactly, but why my system is so unstable? Other software cause it? :P Did you wipe before flashing LCR v1.2.3? Some people flash it over the top of the LiquidE bin without wiping...and then it WILL be very unstable. This was my experience. You flash the LiquidE just to get the radio installed....then wipe the data and dalvik...and flash LCR.
Guest Yuking Posted March 30, 2010 Report Posted March 30, 2010 No stability problems here with SetCPU. It's kind of obvious how to set it up.....do you really need to ask? You choose liquid as your phone, then fill in the profiles - if you want to use them - and set CPU speeds for each being aware of what each is trying to achieve: Low power? Go slower. Charging? Charge faster by going slower. Battery too hot? Slow down. Actually using the phone right now with full battery? GO FAST. You need people to tell you this? *sigh*..... Also remember.....not much point slowing the CPU down if you run your screen at 100% brightness and have every wifi / GPS / bluetooth / 3G service running. There is more to battery than just CPU. Thank you for your advises. I need them, but they are not the cores of my question. I want to solve the problem of abnormal rebooting using with SetCPU - I guessed it is caused by SetCPU, maybe I am wrong - I did not want to write such a title "SetCPU makes my liquid crashed", because I am not able to ensure it is SetCPU's problem.
Guest Yuking Posted March 30, 2010 Report Posted March 30, 2010 Did you wipe before flashing LCR v1.2.3? Some people flash it over the top of the LiquidE bin without wiping...and then it WILL be very unstable. This was my experience. You flash the LiquidE just to get the radio installed....then wipe the data and dalvik...and flash LCR. I flashed 1.2.3 over the top of 1.2.1. Factory reset again. This time, I just installed SetCPU, Advanced task manager. 6 hours passed, everything is OK.
Guest bonbondude Posted January 22, 2011 Report Posted January 22, 2011 I flashed 1.2.3 over the top of 1.2.1. Factory reset again. This time, I just installed SetCPU, Advanced task manager. 6 hours passed, everything is OK. Hi, you might find this detailed guide posted here useful. I believe that it could have been better if there were more screenshots etc.
Guest Vyker Posted February 22, 2011 Report Posted February 22, 2011 Can someone tell me what I need to do to just set the CPU higher for when playing intensive games like Angry Birds? I don't want to set profiles, or what such..... i just want to leave it as standard, and then before I play, I up the CPU... is that possible? Thanks
Guest monoxide.tryst Posted February 23, 2011 Report Posted February 23, 2011 Can someone tell me what I need to do to just set the CPU higher for when playing intensive games like Angry Birds? I don't want to set profiles, or what such..... i just want to leave it as standard, and then before I play, I up the CPU... is that possible? Thanks That seems like a really annoying type of thing to have to do before playing a game O.o
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now