After changing the rom , i got deferent " adjust volume levels "menu , how to deal with it ??

[Guest MimomaN]

Hello ,

i am talking about the " adjust volume levels " menu

that appears when you enter the code ( *#0002*28346# ) , ok ?

in the past i was using OCK's rom , the screen was normal as i know it

it was like this as you all know :

but now i am using JN Foundation's ROM

when i enter the same cod the menu changed with that rom

it became like this :

so how can i deal with it please ?

please i need a description about it , which option for which part ?

for headphone speakers is , for loudspeaker is , for radio is , and so on ..

please help me

this was the old settings that i used it in the old rom :

please tell me , and tell me how to compare it with the new one

i don't know how to deal with it ;)

Edited April 22, 2010 by MimomaN

[Guest MimomaN]

Friends , where are you ? ;)

[Guest magawa]

I will help as I can

download the cab made by me and soft reset the device

then do the *#0002* ........

it will open the old menu

كان احسن لو سألتني في cearab ومنتظر ردك

MaGaWa_audio_control.cab

[Guest MimomaN]

Thanx a lot ma friend

unfortunately it doesn't work , still the old one ;)

i tried to install it twice , on My storage and then in my device , but it didn't work on both ;)

any help ?

مع الأسف حاولت مرتين ومازالت القائمه القديمه ;)

هل من حل ؟

عذراً أخي لإني لم اضع السؤال في الكفي .. لإني لم اضمن إن هناك الكثير الذي يعرف الإجابه

Edited April 21, 2010 by MimomaN

[Guest magawa]

Thanx a lot ma friend

unfortunately it doesn't work , still the old one ;)

i tried to install it twice , on My storage and then in my device , but it didn't work on both ;)

any help ?

مع الأسف حاولت مرتين ومازالت القائمه القديمه ;)

هل من حل ؟

عذراً أخي لإني لم اضع السؤال في الكفي .. لإني لم اضمن إن هناك الكثير الذي يعرف الإجابه

did U do a soft reset ??

if it doesnt work after soft reset sorry its about the rom

the file name is ( sound tester.exe)

hope I helped

[Guest MimomaN]

did U do a soft reset ??

if it doesnt work after soft reset sorry its about the rom

the file name is ( sound tester.exe)

hope I helped

yup , but didn't work ;)

ملحوظه

وجدت ملف بالإسم المذكور في مجلد ويندوز

قمت بفتحه ومحاولة التعديل على القيم كما كنت افعل بالروم السابق

لكن للأسف يبدو إنه غير مُفعل

حيث قمت بضبط الإعدادات به لكنها لا تؤثر على الهاتف كذلك القيم تعود للقديمه التي وجدتها عليه عندما فتحته

اي إني كلما قمت بعمل تعديل عاد كما كان .. بالإضافه إلى إني عندما اضغط ابلاي لا يتأثر الصوت ولا يتغير

[Guest ock]

Soundtester won't work with zuif2 ;) You can only use AudioGainControl.

You can try looking at this liads' guide (scroll down all the way) to see if it helps.

[Guest MimomaN]

yeah yeah , we finally got something

the new menu is called " Audio Gain Control " , and this program is great , and even easier than Soundtester

it's good so far

BUT

i tried to play with it , i got good results so far , not bad at all

i made the sound little bet louder , but i need more and i can't choose another value

i choose " NotInCall_Headset --> Common Part --> Speaker Volume "

and i changed the numbers to 0 , i got little bet louder sound

but i need more and there is no more numbers above 0 to choose

look at this pic :

there's no values more than 0 , and i want to choose higher number to make the volume louder , what can i do ??

please any one tell me , and also if there is any guide or topic about this program " Audio Gain Control " tell me about it please

i need to know more about it

[Guest virgoman]

yeah yeah , we finally got something

the new menu is called " Audio Gain Control " , and this program is great , and even easier than Soundtester

it's good so far

BUT

i tried to play with it , i got good results so far , not bad at all

i made the sound little bet louder , but i need more and i can't choose another value

i choose " NotInCall_Headset --> Common Part --> Speaker Volume "

and i changed the numbers to 0 , i got little bet louder sound

but i need more and there is no more numbers above 0 to choose

look at this pic :

there's no values more than 0 , and i want to choose higher number to make the volume louder , what can i do ??

please any one tell me , and also if there is any guide or topic about this program " Audio Gain Control " tell me about it please

i need to know more about it

How to set Volume with Tools\AudioGainControl: by chokia

[Guest MimomaN]

EDIT : sorry for double post

i got it my friends , i was supposed to modify that option as well " NotInCall_Headset --> Common Part --> Dac PGA Volume / Routing "

it works now , in that option i have a lot of value to choose from , thanks god ;)

now i will play with it to find more and explore it myself

but so far i have just 2 questions no more

1st . which one i can control the speaker when i am talking to some one , i need to hear the voice louder of the one i am talking with

" i mean in the normal speaker not in the headphone "

2nd . i made the values in those 2 options is 0 " Speaker Volume " and " Dac PGA Volume / Routing " , i made those " 0 "

is it good , bad or normal , i mean will this effect the speaker it self or damage it " don't care about my ears lol " ;)

Edited April 22, 2010 by MimomaN