Guest eViL D: Posted May 26, 2010 Report Share Posted May 26, 2010 I don't think there are any USB altering codes for the desire :rolleyes: (that I know of) Something else to try here: sudo nano /etc/usb_modeswitch.d/05c6\:9002 Paste the following into the nano text editor ######################################################## # Qualcomm device? DefaultVendor= 0x05c6 DefaultProduct=0x9002 TargetVendor= 0x0bb4 TargetProduct= 0x0c87 CheckSuccess=20 MessageContent="5553424360293389fc00000080000a2300000000000000fc00000000000000" press CTRL+X, then Y then return to save the file. then run sudo usb_modeswitch -c /etc/usb_modeswitch.d/05c6\:9002 The MessageContent was sniffed in windows using SniffUSB 2.0. It's for the switch to the standard HTC composite USB device though, so it might not work, and somebody with a bricked device might need to sniff their phone instead. When trying to save "Error writing /etc/usb_modeswitch.d/05c6:9002: No such file or directory " Link to comment Share on other sites More sharing options...
Guest Normola Posted May 26, 2010 Report Share Posted May 26, 2010 When trying to save "Error writing /etc/usb_modeswitch.d/05c6:9002: No such file or directory " You can save it anywhere, as long as you alter -c /etc/usb_modeswitch.d/05c6\:9002 to point to the correct place. eg. save to ~/Desktop/blahfile sudo usb_modeswitch -c ~/Desktop/blahfile Link to comment Share on other sites More sharing options...
Guest r&a Posted May 26, 2010 Report Share Posted May 26, 2010 sudo usb_modeswitch -c /home/usb_modeswitch.d/05c6\:9002 Looking for target devices ... No devices in target mode or class found Looking for default devices ... Found default devices (1) Accessing device 004 on bus 001 ... Using endpoints 0x01 (out) and 0x81 (in) Not a storage device, skipping SCSI inquiry Error: could not get description string "manufacturer" Error: could not get description string "product" USB description data (for identification) ------------------------- Manufacturer: Product: Serial No.: not provided ------------------------- Looking for active driver ... No driver found. Either detached before or never attached Setting up communication with interface 0 ... Trying to send the message to endpoint 0x01 ... OK, message successfully sent Device is gone, skipping any further commands Checking for mode switch (max. 20 times, once per second) ... Original device is gone already, not checking Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... No new devices in target mode or class found Mode switch has failed. Bye. Link to comment Share on other sites More sharing options...
Guest Normola Posted May 26, 2010 Report Share Posted May 26, 2010 Setting up communication with interface 0 ... Trying to send the message to endpoint 0x01 ... OK, message successfully sent Device is gone, skipping any further commands This is interesting. Were there any messages show in dmesg when this happened? Link to comment Share on other sites More sharing options...
Guest xTc is loVe Posted May 26, 2010 Report Share Posted May 26, 2010 sudo usb_modeswitch -c /home/usb_modeswitch.d/05c6\:9002 Looking for target devices ... No devices in target mode or class found Looking for default devices ... Found default devices (1) Accessing device 004 on bus 001 ... Using endpoints 0x01 (out) and 0x81 (in) Not a storage device, skipping SCSI inquiry Error: could not get description string "manufacturer" Error: could not get description string "product" USB description data (for identification) ------------------------- Manufacturer: Product: Serial No.: not provided ------------------------- Looking for active driver ... No driver found. Either detached before or never attached Setting up communication with interface 0 ... Trying to send the message to endpoint 0x01 ... OK, message successfully sent Device is gone, skipping any further commands Checking for mode switch (max. 20 times, once per second) ... Original device is gone already, not checking Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... No new devices in target mode or class found Mode switch has failed. Bye. U mean we stay bricked? Link to comment Share on other sites More sharing options...
Guest r&a Posted May 26, 2010 Report Share Posted May 26, 2010 (edited) not that i saw can we try it under fastboot ? then it apears: Bus 001 Device 005: ID 0bb4:0fff High Tech Computer Corp. ah... tried it - wont find the device sudo usb_modeswitch -c /home/usb_modeswitch.d/0bb4\:0fff Looking for target devices ... No devices in target mode or class found Looking for default devices ... No default device found. Is it connected? Bye. This is interesting. Were there any messages show in dmesg when this happened? Edited May 26, 2010 by r&a Link to comment Share on other sites More sharing options...
Guest Normola Posted May 26, 2010 Report Share Posted May 26, 2010 (edited) not that i saw can we try it under fastboot ? then it apears: Bus 001 Device 005: ID 0bb4:0fff High Tech Computer Corp. As far as I can tell, this is the correct device id for fastboot usb anyway. Will fastboot.exe communicate with it? Have you tried this (from an earlier post) *****Ubuntu 9.10+ ***** sudo echo 'SUBSYSTEM=="usb|usb_device", SYSFS{idVendor}=="0bb4", MODE="0660", GROUP="plugdev"' > /lib/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", SYSFS{idVendor}=="05c6", MODE="0660", GROUP="plugdev"' > /lib/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="05c6", ATTR{idProduct}==""9002", SYMLINK+="android_adb"' > /lib/udev/rules.d/11-android.rules suco echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", SYMLINK+="android_fastboot"' > /lib/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0c02", SYMLINK+="android_adb" ' > /lib/udev/rules.d/11-android.rules ***** Ubuntu 9.04 ***** sudo echo 'SUBSYSTEM=="usb|usb_device", SYSFS{idVendor}=="0bb4", MODE="0660", GROUP="plugdev"' > /etc/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", SYSFS{idVendor}=="05c6", MODE="0660", GROUP="plugdev"' > /etc/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="05c6", ATTR{idProduct}==""9002", SYMLINK+="android_adb"' > /etc/udev/rules.d/11-android.rules suco echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", SYMLINK+="android_fastboot"' > /etc/udev/rules.d/11-android.rules sudo echo 'SUBSYSTEM=="usb|usb_device", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0c02", SYMLINK+="android_adb" ' > /etc/udev/rules.d/11-android.rules If you don't have a persistent linux installation, you can try to restart udev like this: sudo /etc/init.d/udev stop sudo /etc/init.d/udev start Edited May 26, 2010 by Normola Link to comment Share on other sites More sharing options...
Guest r&a Posted May 26, 2010 Report Share Posted May 26, 2010 i have no 11-android.rules and command responds: permission denied As far as I can tell, this is the correct device id for fastboot usb anyway. Will fastboot.exe communicate with it? Have you tried this (from an earlier post) *****Ubuntu 9.10+ ***** sudo echo 'SUBSYSTEM=="usb|usb_device", SYSFS{idVendor}=="0bb4", MODE="0660", GROUP="plugdev"' > /lib/udev/rules.d/11-android.rules sudo /etc/init.d/udev start Link to comment Share on other sites More sharing options...
Guest Normola Posted May 26, 2010 Report Share Posted May 26, 2010 (edited) i have no 11-android.rules and command responds: permission denied Try creating it with nano first For ubuntu 9.10+ sudo nano /lib/udev/rules.d/11-android.rules CTRL+C then Y to save If you boot into recovery mode (with the red triangle) and run modeswitch with the following file (using sudo usb_modeswitch -c /NEWFILELOCATION), do you get any effect (dmesg or adb/fastboot detection)? ######################################################## # Change to recovery device? DefaultVendor= 0x05c6 DefaultProduct=0x9002 TargetVendor= 0x0bb4 TargetProduct= 0x0c87 CheckSuccess=20 MessageContent="55534243107c35062400000080000612000000240000000000000000000000" Edited May 26, 2010 by Normola Link to comment Share on other sites More sharing options...
Guest r&a Posted May 26, 2010 Report Share Posted May 26, 2010 (edited) just like before all the lines and then Mode switch has failed. Bye. Edited May 26, 2010 by r&a Link to comment Share on other sites More sharing options...
Guest Normola Posted May 26, 2010 Report Share Posted May 26, 2010 No default vendor/product ID given. Aborting. That doesn't sound right. Could you paste the command you used. Also check to make sure the config file was written correctly. Link to comment Share on other sites More sharing options...
Guest r&a Posted May 26, 2010 Report Share Posted May 26, 2010 missed filename but corrected and no go as i edited the answer That doesn't sound right. Could you paste the command you used. Also check to make sure the config file was written correctly. Link to comment Share on other sites More sharing options...
Guest xTc is loVe Posted May 27, 2010 Report Share Posted May 27, 2010 missed filename but corrected and no go as i edited the answer Any brickes out there with the r5 Rooting Method and the new Recovery Console? Link to comment Share on other sites More sharing options...
Guest nicandris Posted May 27, 2010 Report Share Posted May 27, 2010 ok wont buy a desire... :rolleyes: ordering my N1 now from expansys!! anyone that used em both has something to say about comparance? Link to comment Share on other sites More sharing options...
Guest adi90 Posted May 27, 2010 Report Share Posted May 27, 2010 no new idea ? Link to comment Share on other sites More sharing options...
Guest SonicArt77 Posted May 27, 2010 Report Share Posted May 27, 2010 last night I got the drivers for the three qualcomm devices, and after installing them on a x86 windows machine, they're listed as: Qualcomm HS-USB Modem 9002 Qualcomm HS-USB Diagnostics 9002 (COMx) Qualcomm HS-USB NMEA 9002 (COMx) (assuming for GPS) Seeing that the they're COM ports, we might have some hope... Link to comment Share on other sites More sharing options...
Guest NOFX Posted May 27, 2010 Report Share Posted May 27, 2010 Guys, This might be a really crazy idea, but it just struck me: In this link: http://android.modaco.com/content/google-n...en-final-alpha/, the final alpha port of Desire ROM to N1, I just noticed under 'known bugs'. Known Issues * Bluetooth does not work reliably * FM Radio finds stations but does not produce any sound * Footprints camera view is rotated 90 degrees * USB mount notification does not fire - use 'USB Mount' application from menu. Is it just a coincidence that BT, FM and USB all have problems? And can this fact in some way be related (or maybe solved) in the Desire case as well? Don't hang me if it's rediculous - it's worth a shot right :rolleyes: Link to comment Share on other sites More sharing options...
Guest jamlam Posted May 27, 2010 Report Share Posted May 27, 2010 (edited) last night I got the drivers for the three qualcomm devices, and after installing them on a x86 windows machine, they're listed as: Qualcomm HS-USB Modem 9002 Qualcomm HS-USB Diagnostics 9002 (COMx) Qualcomm HS-USB NMEA 9002 (COMx) (assuming for GPS) Seeing that the they're COM ports, we might have some hope... Have you tried connecting to them with HyperTerminal? There may be a menu or something... EDIT: Also found this link to a post about someone using this device for debugging https://brewmobileplatform.qualcomm.com/bmp...s/list/887.page Edited May 27, 2010 by jamlam Link to comment Share on other sites More sharing options...
Guest adi90 Posted May 27, 2010 Report Share Posted May 27, 2010 Guys, This might be a really crazy idea, but it just struck me: In this link: http://android.modaco.com/content/google-n...en-final-alpha/, the final alpha port of Desire ROM to N1, I just noticed under 'known bugs'. Known Issues * Bluetooth does not work reliably * FM Radio finds stations but does not produce any sound * Footprints camera view is rotated 90 degrees * USB mount notification does not fire - use 'USB Mount' application from menu. Is it just a coincidence that BT, FM and USB all have problems? And can this fact in some way be related (or maybe solved) in the Desire case as well? Don't hang me if it's rediculous - it's worth a shot right :rolleyes: Like this idea ... SonicArt77 , can you share those drivers please ? Link to comment Share on other sites More sharing options...
Guest SonicArt77 Posted May 27, 2010 Report Share Posted May 27, 2010 Like this idea ... SonicArt77 , can you share those drivers please ? They don't work on x64Qualcomm_CDMA_T919_USB_Driver_2.0.3.9.zip Link to comment Share on other sites More sharing options...
Guest adi90 Posted May 27, 2010 Report Share Posted May 27, 2010 will try what is possible with that as soon as i reboot under window Link to comment Share on other sites More sharing options...
Guest madmic Posted May 27, 2010 Report Share Posted May 27, 2010 Just a thought - been doing some reading around the qualcom debugging mode theory and found this http://forum.gsmhosting.com/vbb/f286/samsu...problem-897528/ Basically, you can enter a diagnostic mode on the Samsung phone for unlocking, but this points to the phone being locked in a debug mode... just a thought... Link to comment Share on other sites More sharing options...
Guest r&a Posted May 27, 2010 Report Share Posted May 27, 2010 maybe one of these files? http://www.filecrop.com/Qualcomm-QXDM.html Link to comment Share on other sites More sharing options...
Guest kubino Posted May 27, 2010 Report Share Posted May 27, 2010 last night I got the drivers for the three qualcomm devices, and after installing them on a x86 windows machine, they're listed as: Qualcomm HS-USB Modem 9002 Qualcomm HS-USB Diagnostics 9002 (COMx) Qualcomm HS-USB NMEA 9002 (COMx) (assuming for GPS) Seeing that the they're COM ports, we might have some hope... seems like you are locked in debug mode. the good think is you will propably be able to access device at low level. Has anybody tried to use QXDM / QPST ? QPST (Qualcomm Product Support Tool) is an windows application developed by Qualcomm for cellular phones that feature Qualcomm chipsets. It features a file explorer, factory test tools, low level communication settings, RF calibration tools, roaming list editor, service programming tool, and more. Link to comment Share on other sites More sharing options...
Guest Biliskner Posted May 28, 2010 Report Share Posted May 28, 2010 seems like you are locked in debug mode. the good think is you will propably be able to access device at low level. Has anybody tried to use QXDM / QPST ? QPST (Qualcomm Product Support Tool) is an windows application developed by Qualcomm for cellular phones that feature Qualcomm chipsets. It features a file explorer, factory test tools, low level communication settings, RF calibration tools, roaming list editor, service programming tool, and more. Yeh I've got those tools. But can't get it to connect to my phone on COM ports. Anyone want them - I can upload.... (if it's not against forum rules) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now