Guest Sh4d0w940 Posted May 12, 2010 Report Share Posted May 12, 2010 Maybe interesting about vibrate bug: If you wipe after flashing the rom vibrate works again (the phone will be stuck on bootscreen though) Link to comment Share on other sites More sharing options...
Guest blork Posted May 12, 2010 Report Share Posted May 12, 2010 Apart from the restarts I'm really impressed with this release. Definitely seems faster/smoother than MCR 1.7 Vanilla, and there are what almost seem like *hardware* improvements - the camera is so much better, and changing screen brightness doesn't cause a horrible flickering effect any more. If this is just a beta, can't wait for the final! Keep up the good work guys! Link to comment Share on other sites More sharing options...
Guest tido Posted May 12, 2010 Report Share Posted May 12, 2010 Maybe interesting about vibrate bug: If you wipe after flashing the rom vibrate works again (the phone will be stuck on bootscreen though) So if I wipe after install, I won't be able to boot? Link to comment Share on other sites More sharing options...
Guest robertopero Posted May 12, 2010 Report Share Posted May 12, 2010 So if I wipe after install, I won't be able to boot? Yes, same problem here, after wipe the android isn't boot normally. Link to comment Share on other sites More sharing options...
Guest mtoloko Posted May 12, 2010 Report Share Posted May 12, 2010 how many time i need wait !?!? hahahahaha.. my phone still in Android bootscreen more than 30 minutes.. Link to comment Share on other sites More sharing options...
Guest Lizzleeee Posted May 12, 2010 Report Share Posted May 12, 2010 Trying to install navigon from my sd, doesn't work :S Link to comment Share on other sites More sharing options...
Guest ndot Posted May 12, 2010 Report Share Posted May 12, 2010 Nothing is fixing the no vibrate problem. Link to comment Share on other sites More sharing options...
Guest Sh4d0w940 Posted May 12, 2010 Report Share Posted May 12, 2010 how many time i need wait !?!? hahahahaha.. my phone still in Android bootscreen more than 30 minutes.. You need to wipe before installing, it will stay like this unless you wipe and flash rom again. Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 (edited) I tried already different flashing ways. 1. from 1.8 directly to 2.1 without wiping (won't start) 2. wiping everything and then 2.1 r4 after r3 3. 1.8 to r3 to r4 nothing worked What did the users do who got a working and vibrating fon? EDIT: D'you mean only wiping the darvik cache? Edited May 12, 2010 by eckengucker1 Link to comment Share on other sites More sharing options...
Guest MarcusHenrique Posted May 12, 2010 Report Share Posted May 12, 2010 I tried already different flashing ways. 1. from 1.8 directly to 2.1 without wiping (won't start) 2. wiping everything and then 2.1 r4 after r3 3. 1.8 to r3 to r4 nothing worked What did the users do who got a working and vibrating fon? EDIT: D'you mean only wiping the darvik cache? I've wiped and installed r4 directy =D Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 I've wiped and installed r4 directy =D And it's working? Formated SD? Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 I've wiped and installed r4 directy =D And it's working? Formated SD? Link to comment Share on other sites More sharing options...
Guest Spooke Posted May 12, 2010 Report Share Posted May 12, 2010 So can someone quickly tell me if this is right, Nandbackup, wipe Data / Dalvik cache, flash the update.zip, reboot, Im coming from Vanilla 1.7 Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 I've wiped and installed r4 directy =D And it's working? Formated SD? Link to comment Share on other sites More sharing options...
Guest MarcusHenrique Posted May 12, 2010 Report Share Posted May 12, 2010 And it's working? Formated SD? It was working before I format the sd, after formatting it's still working flawless Link to comment Share on other sites More sharing options...
Guest tido Posted May 12, 2010 Report Share Posted May 12, 2010 And it's working? Formated SD? So, if I solve the FlashPuzzle, the steps to boot the 2.1 rom correctly are: 1.Wipe 2.Wipe Dalvik-cache 3.Flash ROM 4.pull out SD-card. 5. Reboot but DO NOT wipe. Is this correct? Link to comment Share on other sites More sharing options...
Guest Spooke Posted May 12, 2010 Report Share Posted May 12, 2010 So, if I solve the FlashPuzzle, the steps to boot the 2.1 rom correctly are: 1.Wipe 2.Wipe Dalvik-cache 3.Flash ROM 4.pull out SD-card. 5. Reboot but DO NOT wipe. Is this correct? So pullout SD card after the roms flashed, while still in recovery mode?? then just reboot phone option in recovery?? I personally was gonna leave SD in my phone and reboot, whats the difference? Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 (edited) So pullout SD card after the roms flashed, while still in recovery mode?? then just reboot phone option in recovery?? I personally was gonna leave SD in my phone and reboot, whats the difference? You've to pull out the memory card if the fon isn't starting/in a boot loop. The problem is caused by an app called "app2sd". Otherwise you can just leave in the sd-card. Edited May 12, 2010 by eckengucker1 Link to comment Share on other sites More sharing options...
Guest Minus616 Posted May 12, 2010 Report Share Posted May 12, 2010 Just tried it and it works fine :) However it is T-mobile so it's a bit..ewww Also button mix at the bottom is really going to annoy me I'll wait till the vanilla one ;) But great work guys! Link to comment Share on other sites More sharing options...
Guest tido Posted May 12, 2010 Report Share Posted May 12, 2010 So, if I solve the FlashPuzzle, the steps to boot the 2.1 rom correctly are: 1.Wipe 2.Wipe Dalvik-cache 3.Flash ROM 4.pull out SD-card. 5. Reboot but DO NOT wipe. Is this correct? aaaaand YESSS! This is the way to start the ROM. I've just did these steps and my Pulse booted for about 5 minutes. Now I'm gonna try it out ^^ Thanks BoBo and Paul :) Link to comment Share on other sites More sharing options...
Guest giryan Posted May 12, 2010 Report Share Posted May 12, 2010 If you're not trying to use Apps2SD then you don't need to pull the SD card. At least the times I've flashed 2.1 it's been fine, I have no ext partition on the SD because I've not been using Apps2SD because it's causes too many problems. Link to comment Share on other sites More sharing options...
Guest screwface Posted May 12, 2010 Report Share Posted May 12, 2010 If you're not trying to use Apps2SD then you don't need to pull the SD card. At least the times I've flashed 2.1 it's been fine, I have no ext partition on the SD because I've not been using Apps2SD because it's causes too many problems. App2Sd doesn't cause problems? I've been using it all day with over 30 apps installed my phone hasn't rebooted or errored. Link to comment Share on other sites More sharing options...
Guest MarcusHenrique Posted May 12, 2010 Report Share Posted May 12, 2010 Autokiller improved ALOT overall system speed. I's highly recommended! Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted May 12, 2010 Report Share Posted May 12, 2010 App2Sd doesn't cause problems? I've been using it all day with over 30 apps installed my phone hasn't rebooted or errored. only in some cases it isn't working. like the vibrations... the aren't working for me but for others. on the other hand I haven't had any app2sd problems till now Link to comment Share on other sites More sharing options...
Guest le_lutin Posted May 12, 2010 Report Share Posted May 12, 2010 I DO NOT have vibrate working Coming from 1.7 MCR vanilla, here is what I did: - chose the wipe option in recovery mode. - I *tried* to wipe the dalvik cache but got an error saying something about adb - chose to update the phone using the file on the card - phone updated and went back to recovery console - pulled out the sd card - chose the reboot option. As I say, doing the above, vibrate does not work. Not sure what the key step is. Apart from that, the ROM looks quite stable and very fast. Still suffering from the stuttering list scrolling that the T-Mob ROMs suffered from before (the vanilla ROM greatly improved list scrolling). Oh yeah, and the gallery seems to be the same as 1.5 for some reason. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now