Jump to content

Update failed and flashing lights...


Recommended Posts

Guest dabelie
Posted

Hi all,I am just having this boring problem when I try any update from a "updata.app",when I put the "dload" folder in my memory card root,I reboot and try to update but it won't work...I heard it's happenning to other people so maybe someone has solved it already,or if someone has some interesting idea,it would be nice!

I did the december update a while ago,I recently tried the chinese update to have vibration on 2.1,and I have been trying the hungarian official 2.1 update,but no way,I am stuck on my (nice) 1.7 MCR.

Thanks.

(I hope you understood my problem,I am not so good in englsih usually.. :( )

Guest Epic-Emodude
Posted
Hi all,I am just having this boring problem when I try any update from a "updata.app",when I put the "dload" folder in my memory card root,I reboot and try to update but it won't work...I heard it's happenning to other people so maybe someone has solved it already,or if someone has some interesting idea,it would be nice!

I did the december update a while ago,I recently tried the chinese update to have vibration on 2.1,and I have been trying the hungarian official 2.1 update,but no way,I am stuck on my (nice) 1.7 MCR.

Thanks.

(I hope you understood my problem,I am not so good in englsih usually.. :( )

Have you still got a old Dload folder on there? If so boot into recovery mode, enable USB and then delete them (If your using linux make sure theyre really gone) and then try again. THat worked for me.

Aaron

Guest dabelie
Posted

Thanks for the help,I tried to delete from recovery,toggle usb and delete any "dload", then put the "dload" again,but it still fails...

Guest gusthy
Posted
Hi all,I am just having this boring problem when I try any update from a "updata.app",when I put the "dload" folder in my memory card root,I reboot and try to update but it won't work...I heard it's happenning to other people so maybe someone has solved it already,or if someone has some interesting idea,it would be nice!

I did the december update a while ago,I recently tried the chinese update to have vibration on 2.1,and I have been trying the hungarian official 2.1 update,but no way,I am stuck on my (nice) 1.7 MCR.

Thanks.

(I hope you understood my problem,I am not so good in englsih usually.. :( )

For some people with chinese update, it happens.

What can yo do is:

- Download Swiss 8230 rom

- Flash it (it will say "update failed" at around 80% of flash, but by that time it repartitions the file system)

- Install amon-ra recovery

- From that point you are on your own, select a ROM in update.zip format and install, or you can split the original ROM and install via fastboot or whatever.

Guest dabelie
Posted (edited)
No, its origin.

You find it on huaweidevice.com

Thanks I just saw it one minute ago! :(

I am going to try that I keep you posted!

Edited by dabelie
Guest dabelie
Posted

I downloaded the update frrom huawei but still the lights flashing and the "update failed" message again and again....grrrr

Guest dabelie
Posted

Can somebody tell me what to do? Because it seems like I can't apply any UPDATA.APP on my pulse...I tried to flash the new MCR 2.1 from Paul on recovery but of course it didn't work,but it didn't do any big damage,I just reapplied my old 1.7 MCR...so I really don't know what is my problem,all the custom roms I have tried previously worked as they should,but when it comes to installing an update,no way...

Thanks

Guest robot1000
Posted
I downloaded the update frrom huawei but still the lights flashing and the "update failed" message again and again....grrrr

Have you made sure the battery is full or plugged in before installing?

Guest dabelie
Posted (edited)

Yes I tried that,and I also removed the battery and tried again,it's written that it could help but still nothing,I can't update at all,but thanks for the support!

I hope I'll find a solution soon,it's frustrating because I was waiting for that update like everyone here!

Edited by dabelie
Guest tetartfred
Posted (edited)

Hi

I have the same problem than you, i try all the same solution as you, and no result !!

Help us please

Edited by tetartfred
Guest dabelie
Posted

Actually I finally solved my problem, but I don't really know what happenned:

I went on the recovery and I wiped everything,I partition my sd card, then I took an other sd card I have and I partitionned it too.

Then I tried the t-mobile hungarian update,and I saw "preparing to update" longer than usually,but then I saw "update failed"

After that I tried the swiss official update for U8230,and it said "preparing etc" then nothing happenned,and after I boot up like usual,but my touchscreen doesnt work anymore lol...

So I reboot and this time the update for U8230 worked,so I install it and as I was warned it stops around 85%;then I remove the battery,and I install amon-ra recovery,and I finally install the 2.1 rbm vanilla rooted update! So now everything is ok for me apparently,thanks everybody for your advices =)

Hi

I have the same problem than you, i try all the same solution as you, and no result !!

Help us please

Si tu as besoin d'aide je peux essayer de t'aider cher compatriote! =)

Bonne chance

Guest syparon
Posted

J'ai le même problème et cela depuis l'installation de la rom "update-U8230V100R001C00B250-rooted-signed", que j'ai réussi à l'insataller, ma carte SD n'est plus reconnue et en plus je n'arrive pas à faire de mis à jour car sois disant l'option de mis à niveau n'a pas été détectée". Je m'arrache les cheveux AIDEZ MOI PAR PITIE.

Je pense qu'il me faudrait un backup avec la rom originale du u8230 .....

I have the same problem and since the installation of the rom "update-U8230V100R001C00B250-rooted-signed" my SD card is not recognized and i try to mount my SD card, but no success !!! Moreover the upgrade option doesn't work ("it hasn't been detected") HELP ME PLEASE !!!!

I think that I have to have an original backup of the rom of my u8230 ....

Guest Philippe Demartin
Posted
J'ai le même problème et cela depuis l'installation de la rom "update-U8230V100R001C00B250-rooted-signed", que j'ai réussi à l'insataller, ma carte SD n'est plus reconnue et en plus je n'arrive pas à faire de mis à jour car sois disant l'option de mis à niveau n'a pas été détectée". Je m'arrache les cheveux AIDEZ MOI PAR PITIE.

Je pense qu'il me faudrait un backup avec la rom originale du u8230 .....

I have the same problem and since the installation of the rom "update-U8230V100R001C00B250-rooted-signed" my SD card is not recognized and i try to mount my SD card, but no success !!! Moreover the upgrade option doesn't work ("it hasn't been detected") HELP ME PLEASE !!!!

I think that I have to have an original backup of the rom of my u8230 ....

Try another SD card or partition it clean on another device

Guest syparon
Posted
Try another SD card or partition it clean on another device

My SD CARD is recognized but "update failed" :)

Guest syparon
Posted

same problem i can't upgrade my software HELP ME PLEAAAASE !!!!!!

Guest gusthy
Posted
same problem i can't upgrade my software HELP ME PLEAAAASE !!!!!!

Did you try w different SD card?

Guest syparon
Posted
same problem i can't upgrade my software HELP ME PLEAAAASE !!!!!!

Yes i think that the problem is my custom rom which don't want install my update

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.