Did I just brick my phone? please give advice

[Guest Nrond]

Hi there I am pretty new to this and afraid I got what you call a USB brick.

so here is what I did.

got a new desire with

HBOOT 0.80

O2 germany branded

Cause of the need to have VPN/IPSEC funtionallty I decided root, following your guide.

after this installed custom rom r3.1-bravo-desire-modacocustomrom-withadditions-a2sd+-signed.zip

did this twice once with ext2 then with ext3 partition. because I read about QuickOffice problems in here.

both did not work with quick office so decided to flash with r3.1-bravo-desire-modacocustomrom-withadditions-signed.zip to give it a try.

still in recovery i partitionen new with out ext partition. The phone boot up but had some SD Card errors (missng something but access to it).

So i partioned new with 512mb ext. Startet new and everithing was fine. But still no quick office. and I decided to flash r3.1-bravo-desire-modacocustomrom-withadditions-a2sd+-signed.zip again.

So this was last stable version

r3.1-bravo-desire-modacocustomrom-withadditions-signed.zip

partioned with 512mb ext2 rest Fat32 on 4gb card

went to recovery to upgrade ext2 > ext3

there was a message on screen very short, but looked like something went wrong (couldn't read fast enough)

But then it upgraded correctly (seemed to)

then I booted to move new image to card

But now the phone come up with message that it cant find SD card and there is no connection to my phone provider. Wifi is still fine.

Back to bootloader I cant connect the device anymore, getting the screen with red triangle but adb shows "error: device not found" and window ask me for

Qualcomm drivers (for the first time)

hoping for, I just messed up my SD card, I formatted (FAT32 under Windwows Vista) the card i used as gold card (2gb), but its the same behavior.

clear storage in fastboot, clears data but still no better work

are there any advices? Did i brick it? and if so, what are my option?

some one got any experiences with guarantee services of O2 germany in that case?

hopefully looking for your advice

Nrond

[Guest abc27]

Yes the phone is bricked unfortunately.

I have no experience with O2 Germany but your best bet is to find an update RUU for O2 Germany and boot into fastboot and flash the stock O2 rom. Then try your luck with O2 germany.

[Guest scotch whisky]

Sorry - I am afraid you are "USB bricked".

[Guest Nrond]

update RUU for O2 Germany and boot into fastboot and flash the stock O2 rom

any sources?

what i just managed ist to restart

In the terminal window, enter either 'step1-windows.bat', './step1-mac.sh' or './step1-linux.sh' as appropriate.

of root prozess

would this be the produre to flash a stock rom?

after this starting recovery comes up with a green picture

[Guest craigcrawford1988]

update RUU for O2 Germany and boot into fastboot and flash the stock O2 rom

any sources?

what i just managed ist to restart

In the terminal window, enter either 'step1-windows.bat', './step1-mac.sh' or './step1-linux.sh' as appropriate.

of root prozess

would this be the produre to flash a stock rom?

after this starting recovery comes up with a green picture

The green picture usually means it's updating.

[Guest Nrond]

The green picture usually means it's updating.

cant reproduce this :(

found this link wit an update

http://www.o2online.de/nw/support/download...e/htc/htcdesire

the exe file contains a rom.zip

tried to flash this via step1-windows.bat file name in bat change to rom.zip

gives me: FAILED <remote: 43 signature verify fail>

compared rom.zip with testimage.zip and exchanged hboot_8x50_0.80.0000_20100329.nb0

rezipped with winrar :(

now getting gives me: FAILED <remote: 12 signature verify fail>

anything I can to to make device look like it has factory setting?

Edited May 30, 2010 by Nrond

[Guest xTc is loVe]

cant reproduce this :(

found this link wit an update

http://www.o2online.de/nw/support/download...e/htc/htcdesire

the exe file contains a rom.zip

tried to flash this via step1-windows.bat file name in bat change to rom.zip

gives me: FAILED <remote: 43 signature verify fail>

compared rom.zip with testimage.zip and exchanged hboot_8x50_0.80.0000_20100329.nb0

rezipped with winrar :(

now getting gives me: FAILED <remote: 12 signature verify fail>

anything I can to to make device look like it has factory setting?

02 Germany wont repair it! Ive testet it =(

[Guest Nrond]

02 Germany wont repair it! Ive testet it =(

telling me I got a new paperweight with Wifi function?

[Guest stevebrush]

telling me I got a new paperweight with Wifi function?

You are very lucky as the fix has been released a few minutes ago...

[Guest Nrond]

You are very lucky as the fix has been released a few minutes ago...

wow thanks probably would read teh fix post

:(

give it a try now