Jump to content

Created rootedupdate.zip version 1.21.405.2


Recommended Posts

Guest oclock
Posted (edited)

Hi,

I created today a 'rootedupdate.zip' that contains system and boot.img version 1.21.405.2. As far as I know this is not available anywhere else.

Advantages:

* It can be used instead of Paul´s rootedupdate.zip in the rooting guide to update directly to 1.21.405.2

* Get stock SW version 1.21.405.2, without updating hboot and/or radio

* Rooted (superuser apk and su)

* and more...

I tested it with my unbranded, rooted desire SW version 1.15.405.2 (without wiping before or after update).

After update, software info says:

Baseband version 32.30.00.28U_4.05.00.11

Kernel: 2.6.29-0cb9f166 htc-kernel@and18-2 #1

Build: 1.21.405.2 cl174215 release keys

And everything seems to work.

Apps and data preserved.

USE AT YOUR OWN RISK!

All modifications (e.g. fonts) in /system are lost after this update.

in theory A2SD should *NOT* be lost (the symlinks in /data are not touched). However, the startup script is lost. I do not know how this will influence the behaviour of your device. So, please be careful. Do not update, if you do not know what you are doing :(

A couple of users reported now, that this update is working. However, if you use A2SD then after update your device will probably be in a bootloop. In this case reinstall A2SD and everything should be fine.

Downloads:

----------

This is the latest release, called "Four O´Clock A.M.".

http://rapidshare.com/files/399268174/Four-oClock-AM.zip

Mirror: http://i2x.de/~oclock/Four-oClock-AM.zip

md5sum: 155b506ac487e9239ce6c9886cdf1e07

Content:

* SW version 1.21.405.2

* Kernel:

   * loopback device enabled (allows you to do 'mount -o loop ...')

   * iprange & ipowner enabled (for DroidWall compatibility)

* NEW Busybox 1.16.2 in /system/xbin and also already installed in /system/xbin (busybox is the latest version compiled by myself!)

   * Compiled with an optimized toolchain and statically linked against uClibc (50% smaller binary compared to the one in Three O´Clock A.M.!)

   * bbconfig enabled

   * configured cron dir: /data/cron, udhcpd dir: /data/udhcpd, service dir: /data/service 

* Superuser 2.1

* Replaced /system/etc/firmware/fw_bcm4329_ap.bin with the one from HTC Evo 4g to make wifi tethering work

* Android wifi tether 2.0.2 (installed in /system/app)

* Removed annoying boot sound

* flash_image installed in /system/xbin (usefull if you usb bricked your device)
Info:

* Android wifi tether [url="http://code.google.com/p/android-wifi-tether/"]http://code.google.com/p/android-wifi-tether/[/url]

* Description of wifi tether bugfix: [url="http://code.google.com/p/android-wifi-tether/issues/detail?id=330#c66"]http://code.google.com/p/android-wifi-teth...tail?id=330#c66[/url]

* configured busybox dirs have to be created by yourself, if you need these features

* DroidWall can be installed from the market

* You should not get line-3 errors and market should work as always (/data dir is not modified by this rom anymore!)
Additional update:

See post #43 on page 3 for:

* Tuned kernel (probably you will lose loopback with this kernel!)

* A2SD++

----------

This release is called "Three O´Clock A.M.".

http://rapidshare.com/files/396770581/root...te-custom-3.zip

Content:

* SW version 1.21.405.2

* Recompiled stock kernel with loopback device enabled (allows you to do 'mount -o loop ...')

* Busybox 1.16.1 in /system/xbin and also already installed in /system/xbin (busybox is the latest version compiled by myself!)

* Superuser 2.1

* Replaced /system/etc/firmware/fw_bcm4329_ap.bin with the one from HTC Evo 4g to make wifi tethering work

* Android wifi tether 2.0.2-pre14 (installed in /data/app, thus can be removed and/or manually updated!)

Info:

* Android wifi tether http://code.google.com/p/android-wifi-tether/

* Description of wifi tether bugfix: http://code.google.com/p/android-wifi-teth...tail?id=330#c66

Additional update:

See post #43 on page 3 for:

* Tuned kernel (probably you will lose loopback with this kernel!)

* A2SD++

md5sum: 1da858275abe35512fd87bdb8dfb3f86

----------

This release is called "Two O´Clock A.M.".

http://rapidshare.com/files/396471606/root...te-custom-2.zip

Content:

* SW version 1.21.405.2

* Recompiled stock kernel with loopback device enabled (allows you to do 'mount -o loop ...')

* Busybox 1.16.1 in /system/xbin and also already installed in /system/xbin (busybox is the latest version compiled by myself!)

* Superuser 2.1

Info:

To use loopback devices, you first have to create the loopback device like this:

mkdir /dev/loop

mknod -m640 /dev/loop/0 b 7 0

Afterwards you can loop mount an image like this:

mount -t ext2 -o loop /somewhere/file.img /mymountpoint

Additional update:

See post #43 on page 3 for:

* Tuned kernel (probably you will lose loopback with this kernel!)

* A2SD++

md5sum: 9e8bb9eee0179b83bfb116944cc8b982

----------

http://rapidshare.com/files/395319842/root...-2.1-signed.zip

Content:

* SW version 1.21.405.2

* Superuser 2.1

Additional update:

See post #43 on page 3 for:

* Tuned kernel

* A2SD++

md5: 0ac29a464255fe37d119232c24874de8

----------

The following is obsolete and replaced by the update above with SU 2.1. There should be no reason that you want this anymore!

http://rapidshare.com/files/395105265/root...05.2-signed.zip

Mirror #1: http://dl.dropbox.com/u/7474062/rootedupda...05.2-signed.zip

(brought to you by: https://www.dropbox.com/referrals/NTc0NzQwNjI5 (250mb extra space))

Content:

* SW version 1.21.405.2

* Older Superuser version (the version found in Paul´s rootedupdate.zip)

Additional update:

See post #43 on page 3 for:

* Tuned kernel

* A2SD++

md5: bbdcd3f1eb0e16b95a294defd932f89e

----------

Best wishes,

oC

Edited by oclock
Guest jedininja666
Posted
Hi,

I created today a 'rootedupdate.zip' that contains system and boot.img version 1.21.405.2. As far as I know this is not available anywhere else.

Advantages:

* It can be used instead of Paul´s rootedupdate.zip in the rooting guide to update directly to 1.21.405.2

* Get stock SW version 1.21.405.2, without updating hboot and/or radio

* Rooted (superuser apk and su, like Paul´s rootedupdate.zip)

I tested it with my unbranded, rooted desire SW version 1.15.405.2 (without wiping before or after update).

After update, software info says:

Baseband version 32.30.00.28U_4.05.00.11

Kernel: 2.6.29-0cb9f166 htc-kernel@and18-2 #1

Build: 1.21.405.2 cl174215 release keys

And everything seems to work.

Apps and data preserved.

How can I share it with you (dont have experience with that)?

Best wishes,

oC

Fantastic!! You could get a free Dropbox account and make the file shared? Or maybe put it on Rapidshare or Megaupload?

Guest _Dejan_
Posted

Great.

Im waiting this :( How if you have installed APP2SD? Will effect it? Please upload it on some free hosting site and someone will make mirrors...

Guest oclock
Posted (edited)

DL link is in first post. Please create mirrors.

Edited by oclock
Guest Café King
Posted
DL link is in first post. Please create mirrors.

Do I copy this file into my normal sdcard or what to do? Still tired from last nights work on my Desire...

Guest masi0
Posted
Do I copy this file into my normal sdcard or what to do? Still tired from last nights work on my Desire...

read the rooting guide u can find on this very forum :(

Guest Heppieboeddah
Posted

Really need more info on this. If you have a working rooted Desire with apps2sd, sw 1.15*** will this update.zip, update to 1.21***, without loosing apps2sd, settings, applications etc..?

Guest _Dejan_
Posted
Really need more info on this. If you have a working rooted Desire with apps2sd, sw 1.15*** will this update.zip, update to 1.21***, without loosing apps2sd, settings, applications etc..?

I would like get this confirmation too :(

Guest DLDarklink
Posted

phone keeps rebooting after update :S

Guest oclock
Posted (edited)
Really need more info on this. If you have a working rooted Desire with apps2sd, sw 1.15*** will this update.zip, update to 1.21***, without loosing apps2sd, settings, applications etc..?

* you will lose a2sd!

* applications and settings are not lost (because only /system is overwritten)

After update your device will have a rooted stock rom version 1.21.405.2.

However, use at your own risk!

I tested this update only with my own device. No confirmation that it worked for others yet.

Edited by oclock
Guest _Dejan_
Posted
phone keeps rebooting after update :S

My too...

Guest oclock
Posted (edited)
My too...

My device was rooted using Paul´s method. I had no a2sd or other additional modifications.

Then I copied my update zip to the sd card, started recovery again and selected the zip file.

After a few minutes it was done. Rebooted. Worked.

How did you update?

What was on your device before update?

Was a2sd installed?

In this thread is an alternative update.zip by user mountnorth:

http://android.modaco.com/content-page/310...-405-2/page/20/

Maybe you can give it a try. I quickly looked into it and seems pretty much the same besides that he used SU 2.1, while I used the one in Pauls 1.15.405.4 rootedupdate.zip.

Edited by oclock
Guest jedininja666
Posted
My device was rooted using Paul´s method. I had no a2sd or other additional modifications.

Then I copied my update zip to the sd card, started recovery again and selected the zip file.

After a few minutes it was done. Rebooted. Worked.

How did you update?

What was on your device before update?

Was a2sd installed?

In this thread is an alternative update.zip by user mountnorth:

http://android.modaco.com/content-page/310...-405-2/page/20/

Maybe you can give it a try. I quickly looked into it and seems pretty much the same besides that he used SU 2.1, while I used the one in Pauls 1.15.405.4 rootedupdate.zip.

I can confirm that I flashed your ROM and it worked beautifully! Many thanks!

The only other thing I did was to re-flash my Busybox, but that was easy to do from the instructions here:

http://android.modaco.com/content/htc-desi...-rooted-desire/

Guest _Dejan_
Posted (edited)
My device was rooted using Paul´s method. I had no a2sd or other additional modifications.

Then I copied my update zip to the sd card, started recovery again and selected the zip file.

After a few minutes it was done. Rebooted. Worked.

How did you update?

What was on your device before update?

Was a2sd installed?

In this thread is an alternative update.zip by user mountnorth:

http://android.modaco.com/content-page/310...-405-2/page/20/

Maybe you can give it a try. I quickly looked into it and seems pretty much the same besides that he used SU 2.1, while I used the one in Pauls 1.15.405.4 rootedupdate.zip.

Hi,

I have generic/unbranded HTC Desire

Im root it by windows methode.

Im update it: Copy file to SD card boot into recovery mode(back + power button) and then select recovery and run .bat file on pc. Select update from sd card and wait after complete Im press restart from menu.

Yes APP2SD has been installed.

Now I have original 1.15.405.4 on it and dooing FOTA...

Edited by _Dejan_
Guest oclock
Posted
Yes APP2SD has been installed.

Now I have original 1.15.405.4 on it and dooing FOTA...

The problem could be because of A2SD.

But because I dont use A2SD, I sont know it for sure.

Good luck with OTA!

Guest dreamdealer
Posted
My device was rooted using Paul´s method. I had no a2sd or other additional modifications.

Then I copied my update zip to the sd card, started recovery again and selected the zip file.

After a few minutes it was done. Rebooted. Worked.

How did you update?

What was on your device before update?

Was a2sd installed?

In this thread is an alternative update.zip by user mountnorth:

http://android.modaco.com/content-page/310...-405-2/page/20/

Maybe you can give it a try. I quickly looked into it and seems pretty much the same besides that he used SU 2.1, while I used the one in Pauls 1.15.405.4 rootedupdate.zip.

Can't u install the apps2sd from a separate zip after you have installed the main stock rooted Rom like you could during the r1 rooting method to get it to work will try this tonnight but would be nice to know if possible before if someone could test it.

Guest oclock
Posted
Can't u install the apps2sd from a separate zip after you have installed the main stock rooted Rom like you could during the r1 rooting method to get it to work will try this tonnight but would be nice to know if possible before if someone could test it.

I see no reason why it should not work. If you try it, please let us know!

Guest ldti
Posted

installed it on a unbranded UK Desire , Previously had the 1.15 generic rooted version.

installed fine , but deleted Hebrew fonts, so i had to reinstall them.

Guest Heppieboeddah
Posted

Update:

I had 1.15*** rooted with apps2sd on a nonbranded Desire. Tried to apply the update.zip as provided in the first post. My phone went into a bootloop. So the only thing remaining was from the recovery:

a full wipe

apply the update.zip

reboot till the login-screen

powerdown

back to recovery

apply the apps2sd-fresh.zip

reboot

Now i have a rooted Desire 1.21*** with apps2sd fully working.

Only thing I now have to do is, re-installing all my apps....

So just simpel updating from 1.15 to 1.21 with the provided update.zip is a nogo.

Anyway, thanks for OP's for sharing.....

Guest dreamdealer
Posted (edited)

Installed from recovery no-problem (no wipe)

Installed apps2sd dalvik version used in the r1 root method no-problem (no ext wipe) - if your having boot-loop its probably because the kernel does not support ext4 partition so you need to convert back to ext3.

Checked via adb (adb shell ls -l /data) to see if apps2sd is installed correctly and it is.

Didn't install busybox forgot to copy the file to my sd card lol

Rebooted, bit of a small wait after the quietly brilliant (which normal after a flash)

Everything worked ok, apart from wifi. doesn't seem to turn on, i am sure there's a workaround in this forum somewhere, so off to find a solution now. other than that probably go back on pauls r3.1 rom, but have a sneeky feeling it might not work on that, (have to confess though did this off a previous r3.1 install to test to see if it works) probably why wifi may not work even though it was working on r3.1 and may of worked, if i went from previous stock rooted rom to this update rather than pauls r3.1 rom.

Turned off phone (volume down + power) reboot can confirm its HBOOT 075 still.

Edited by dreamdealer
Guest dreamdealer
Posted
Installed from recovery no-problem (no wipe)

Installed apps2sd dalvik version used in the r1 root method no-problem (no ext wipe) - if your having boot-loop its probably because the kernel does not support ext4 partition so you need to convert back to ext3.

Checked via adb (adb shell ls -l /data) to see if apps2sd is installed correctly and it is.

Didn't install busybox forgot to copy the file to my sd card lol

Rebooted, bit of a small wait after the quietly brilliant (which normal after a flash)

Everything worked ok, apart from wifi. doesn't seem to turn on, i am sure there's a workaround in this forum somewhere, so off to find a solution now. other than that probably go back on pauls r3.1 rom, but have a sneeky feeling it might not work on that, (have to confess though did this off a previous r3.1 install to test to see if it works) probably why wifi may not work even though it was working on r3.1 and may of worked, if i went from previous stock rooted rom to this update rather than pauls r3.1 rom.

Turned off phone (volume down + power) reboot can confirm its HBOOT 075 still.

couldn't find any info on how or why the wifi does not work gone back to Pauls r3.1 rom and wifi working again, if someone finds a fix for this then i will come back to using this particular stock rom again. All i can do is give you a run down of my specification.

Tried this rom using: HTC Desire Unbranded HBOOT 075 on Vodafone (UK) sim deal, flashing from Pauls r3.1 rom.

Guest oclock
Posted (edited)
Tried this rom using: HTC Desire Unbranded HBOOT 075 on Vodafone (UK) sim deal, flashing from Pauls r3.1 rom.

Which radio version?

My wifi is working without problems using this update.

Found this thread @xda-developers about this topic:

http://forum.xda-developers.com/showthread.php?t=693628

Maybe you find a solution there.

Edited by oclock
Guest dreamdealer
Posted
Which radio version?

My wifi is working without problems using this update.

32.30.00.28U_405.00.11

if that's any help.

Guest DigitalC
Posted
Which radio version?

My wifi is working without problems using this update.

Did you flash from Stock yourself?

Im on rooted stock - HBOOT 075, gonna test this out in a bit and see how i get on.

Is the gold card needed, i assume not but dont want to do this until im positive i know what im at :(

Many thanks in advance

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.