Guest Posted June 16, 2010 Report Share Posted June 16, 2010 Titanium Backup has no issues backing up and restoring SMS messages. How do I use it to do this? As far as I can see it only backs up your apps. Link to comment Share on other sites More sharing options...
Guest Simon O Posted June 16, 2010 Report Share Posted June 16, 2010 Says Sim: Used = 0 and Free = 0.... so seems something has gone wrong :'( How do I tell if A2SD is on and when installing apps will they automatically be installed to the SD card? Again I appreciate all your help! Thank you! Easiest way if you have the Android SDK installed is to use ADB to connect to the phone then you can run adb shell from the command line: adb shell then do: a2sd check which will give you output like: a2sd check Starting Darktremor A2SD version 2.7 update 1 [ ] Mounting /system as read-write [ ] Mounting /data as read-write [ ] Starting A2SD in check mode [ ] Running A2SD Check Program. [ ] Searching for Mount Point... [!] Mount point found..no further action required. [ ] Checking for ext partition /dev/block/mmcblk0p2 /system/sd ext2 rw,noatime,nodiratime,errors=continue 0 0 [*] Ext partition found and already mounted. [ ] Checking A2SD links. A2SD Status Report =============================================================== Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Programs run from SD card To run from internal storage, type a2sd remove Private Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Private Programs run from SD card To run from internal storage, type a2sd remove Dalvik Cache - [*] Linked to SD Card. [*] File .dalvikcache found. [*] Dalvik runs from SD card To run from internal storage, type a2sd nocache Swap - [!] Partition not present. [!] Swap does not start. ZipAlign - [*] Running at boot. Property Patch - Property found. cm.filesystem.ready or dc.filesystem.ready [*] Boot image init.rc patched.[/code] the star means it's OK. Link to comment Share on other sites More sharing options...
Guest igor_anta Posted June 16, 2010 Report Share Posted June 16, 2010 A simple question :( Is LauncherPro acting like a system launcher, as in does Better Cut work and does it show up in Task Killer lists? 'Cause ADW has a system version that completely act like a default system app, not just a pushed apk. Just curious ;) Oh, I almost forgot, is the dalvik for apps2sd stored by default on SD or internal? What are you're experiences with both possibilities and I never figured out how much space it takes to install apps with dalvik on internal storage? Cheers, keep up the good work! Link to comment Share on other sites More sharing options...
Guest Bendolfc Posted June 16, 2010 Report Share Posted June 16, 2010 How do I use it to do this? As far as I can see it only backs up your apps. It also backs up system apps and data. Make sure you backup the mms/sms one (can't remember it's exact name), then restore it's data. Worked for me going from 1.5 to 2.1. You need to reboot after the restore. Link to comment Share on other sites More sharing options...
Guest Posted June 16, 2010 Report Share Posted June 16, 2010 It also backs up system apps and data. Make sure you backup the mms/sms one (can't remember it's exact name), then restore it's data. Worked for me going from 1.5 to 2.1. You need to reboot after the restore. Hmm, could you look up the exact name? I'm getting confused. Will it work now that it is a different messaging app? Link to comment Share on other sites More sharing options...
Guest Richard van Nieuwenhuizen Posted June 17, 2010 Report Share Posted June 17, 2010 Is there any good way to backup and restore your text messages? I always use "SMS Backup & Restore" from the Market. Has worked great for me after every update. Link to comment Share on other sites More sharing options...
Guest vassk Posted June 17, 2010 Report Share Posted June 17, 2010 (edited) I always use "SMS Backup & Restore" from the Market. Has worked great for me after every update. I also use "SMS Backup & Restore" and "Call logs Backup & Restore" by Ritesh Sahu from market :-) Edited June 17, 2010 by vassk Link to comment Share on other sites More sharing options...
Guest kankle123 Posted June 17, 2010 Report Share Posted June 17, 2010 Easiest way if you have the Android SDK installed is to use ADB to connect to the phone then you can run adb shell from the command line: adb shell then do: a2sd check which will give you output like: a2sd check Starting Darktremor A2SD version 2.7 update 1 [ ] Mounting /system as read-write [ ] Mounting /data as read-write [ ] Starting A2SD in check mode [ ] Running A2SD Check Program. [ ] Searching for Mount Point... [!] Mount point found..no further action required. [ ] Checking for ext partition /dev/block/mmcblk0p2 /system/sd ext2 rw,noatime,nodiratime,errors=continue 0 0 [*] Ext partition found and already mounted. [ ] Checking A2SD links. A2SD Status Report =============================================================== Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Programs run from SD card To run from internal storage, type a2sd remove Private Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Private Programs run from SD card To run from internal storage, type a2sd remove Dalvik Cache - [*] Linked to SD Card. [*] File .dalvikcache found. [*] Dalvik runs from SD card To run from internal storage, type a2sd nocache Swap - [!] Partition not present. [!] Swap does not start. ZipAlign - [*] Running at boot. Property Patch - Property found. cm.filesystem.ready or dc.filesystem.ready [*] Boot image init.rc patched. the star means it's OK. Confusing haha I don't have the Android SDK installed either, no matter! Cheers again. Link to comment Share on other sites More sharing options...
Guest MaToNeo Posted June 17, 2010 Report Share Posted June 17, 2010 Easiest way if you have the Android SDK installed is to use ADB to connect to the phone then you can run adb shell from the command line: adb shell then do: a2sd check which will give you output like: a2sd check Starting Darktremor A2SD version 2.7 update 1 [ ] Mounting /system as read-write [ ] Mounting /data as read-write [ ] Starting A2SD in check mode [ ] Running A2SD Check Program. [ ] Searching for Mount Point... [!] Mount point found..no further action required. [ ] Checking for ext partition /dev/block/mmcblk0p2 /system/sd ext2 rw,noatime,nodiratime,errors=continue 0 0 [*] Ext partition found and already mounted. [ ] Checking A2SD links. A2SD Status Report =============================================================== Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Programs run from SD card To run from internal storage, type a2sd remove Private Apps - [*] Linked to SD Card. [*] File .noa2sd not found. [*] Private Programs run from SD card To run from internal storage, type a2sd remove Dalvik Cache - [*] Linked to SD Card. [*] File .dalvikcache found. [*] Dalvik runs from SD card To run from internal storage, type a2sd nocache Swap - [!] Partition not present. [!] Swap does not start. ZipAlign - [*] Running at boot. Property Patch - Property found. cm.filesystem.ready or dc.filesystem.ready [*] Boot image init.rc patched. the star means it's OK. There is no other way to find out if A2SD is working properly? Link to comment Share on other sites More sharing options...
Guest vassk Posted June 17, 2010 Report Share Posted June 17, 2010 There is no other way to find out if A2SD is working properly? But it can be. Listing in the /system/sd/app directory, and if it APK, then you use app2sd. Link to comment Share on other sites More sharing options...
Guest goce.nakov Posted June 17, 2010 Report Share Posted June 17, 2010 There is no other way to find out if A2SD is working properly? Install Terminal Emulator from the market type su in it type a2sd check in it if it gives you the same results as Fbl posted it means is working Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2010 Report Share Posted June 17, 2010 I always use "SMS Backup & Restore" from the Market. Has worked great for me after every update. I used this too. But I guess it got messed up due to me using it before all my google contacts had been synced. I'll try it again! ;) Link to comment Share on other sites More sharing options...
Guest biron_w Posted June 17, 2010 Report Share Posted June 17, 2010 Beta4 doesn't work for me. I did a full wipe of everything but once it's booted I get a few force closes(market,messaging,gallery) and then constant launcher pro force closes as well. Link to comment Share on other sites More sharing options...
Guest Richard van Nieuwenhuizen Posted June 17, 2010 Report Share Posted June 17, 2010 (edited) Beta4 doesn't work for me. I did a full wipe of everything but once it's booted I get a few force closes(market,messaging,gallery) and then constant launcher pro force closes as well. Had that too. After I pulled the battery and booted up again the problem was gone, and hasn't appeared since. Give it a try. Hang in there. It's worth while!! Edited June 17, 2010 by Richard van Nieuwenhuizen Link to comment Share on other sites More sharing options...
Guest biron_w Posted June 17, 2010 Report Share Posted June 17, 2010 Had that too. After I pulled the battery and booted up again the problem was gone, and hasn't appeared since. Give it a try. Hang in there. It's worth while!! That has worked for me as well. Cheers ;) Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2010 Report Share Posted June 17, 2010 (edited) Had that too. After I pulled the battery and booted up again the problem was gone, and hasn't appeared since. Give it a try. Hang in there. It's worth while!! I'm currently having that too... Rebooting now. EDIT: It worked, phone is running smoothly! ;) Edited June 17, 2010 by Guest Link to comment Share on other sites More sharing options...
Guest T045Tbr0T Posted June 17, 2010 Report Share Posted June 17, 2010 (edited) Had that too. After I pulled the battery and booted up again the problem was gone, and hasn't appeared since. Give it a try. Hang in there. It's worth while!! Yesterday this worked for me, too. Edited June 17, 2010 by T045Tbr0T Link to comment Share on other sites More sharing options...
Guest flip360 Posted June 17, 2010 Report Share Posted June 17, 2010 it seems that the espresso framework doesnt work quite well on beta4 the clock is black Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2010 Report Share Posted June 17, 2010 it seems that the espresso framework doesnt work quite well on beta4 the clock is black Yeah, Flibblesan has told us it causes problems. Known Issues: - Use of a dark framework theme will result in some application text being unreadable. Stick with vanilla. - Android Keyboard still has weird spaces to the left and right. Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2010 Report Share Posted June 17, 2010 Fibblesan, I don't know if you're aware of this but people in the photothread has found the source of the lines-bug when taking pictures and found a solution, maybe you could implement this in the next release. ;) http://android.modaco.com/index.php?s=&...t&p=1309961 Link to comment Share on other sites More sharing options...
Guest Pipe Merchant Posted June 17, 2010 Report Share Posted June 17, 2010 I finally got around to installing this last night and I must say, this is by far the most stable and usable rom yet! Up until now I was kind of regretting ever having gotten a pulse, but I can see that maybe not all is lost! For the first time I've been able to play music relatively reliably! Link to comment Share on other sites More sharing options...
Guest flip360 Posted June 17, 2010 Report Share Posted June 17, 2010 Yeah, Flibblesan has told us it causes problems. it worked for me in beta3, does it have something to do with build.prop or huawei customizations? Link to comment Share on other sites More sharing options...
Guest brack Posted June 17, 2010 Report Share Posted June 17, 2010 I finally got around to installing this last night and I must say, this is by far the most stable and usable rom yet! Up until now I was kind of regretting ever having gotten a pulse, but I can see that maybe not all is lost! For the first time I've been able to play music relatively reliably! sorry, tried beta4 rebooted several times, keep getting messages app fc. Decided to go back to beta3 and wait for fix release. Cannot call it most stable rom. Link to comment Share on other sites More sharing options...
Guest Simon O Posted June 17, 2010 Report Share Posted June 17, 2010 sorry, tried beta4 rebooted several times, keep getting messages app fc. Decided to go back to beta3 and wait for fix release. Cannot call it most stable rom. The initial release of beta4 was bugged. I re-uploaded it but kept the same name (stupidly). Are you having problems with the latest beta4? Link to comment Share on other sites More sharing options...
Guest dodge-167 Posted June 17, 2010 Report Share Posted June 17, 2010 I have an Android Commander (its ADB, just simpler) and can i just put the defaul launcher on my system/app or i must do something before? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now