[solved]help!

[Guest natostanco]

Tried flashing 2.000.16 bin, it said fastboot succesfull then ended with error server connection failed and stucked with the phone image and the triangle, unplugged and replugged and tried flashing again and same error. I can enter bootloader, what I have to flash through bootloader?

Edited June 9, 2010 by natostanco

[Guest umair9001]

Tried flashing 2.000.16 bin, it said fastboot succesfull then ended with error server connection failed and stucked with the phone image and the triangle, unplugged and replugged and tried flashing again and same error. I can enter bootloader, what I have to flash through bootloader?

From recovery mode, you should be able to upload the bin file again from acer tool.

[Guest natostanco]

From recovery mode, you should be able to upload the bin file again from acer tool.

is there a command through i can switch to recovery from bootloader mode? i am keeping the phone in bootloader mode, Don't know if i turn it off and then try recovery it will work so if there is a command to do this like fastboot -i 0x0502 ecc? Btw it successfull flashed images so maybe i can try turning it off and going recovery? or flash malez recovery and then thourgh recovery start flashing bin again?

Edited June 9, 2010 by natostanco

[Guest mirox3m]

Tried flashing 2.000.16 bin, it said fastboot succesfull then ended with error server connection failed and stucked with the phone image and the triangle, unplugged and replugged and tried flashing again and same error. I can enter bootloader, what I have to flash through bootloader?

Do you have Acer Liquid drivers installed on your Comp? If not install them and start Acer tool, it will continue automatically.

[Guest natostanco]

Do you have Acer Liquid drivers installed on your Comp? If not install them and start Acer tool, it will continue automatically.

yep i have them i flashed many times, but this time it stucked twice with server connection failed after i replugged the usb without switching it off. So i removed battery and entered in bootloader. But can't flash bin through bootloader, acer tools says it's not connected, so i have to flash malez recovery (to be sure there is a recovery image on the phone) and go recovery, and then acer tools will say the phone is connected to flash again?

Or if i just try to boot the phone? it succesfully flashed the image, maybe just the end it failed to restart the phone, but maybe the job was done..?

Edited June 9, 2010 by natostanco

[Guest natostanco]

Or if i just try to boot the phone? it succesfully flashed the image, maybe just the end it failed to restart the phone, but maybe the job was done..?

This :)

in bootloader just flashed malez recovery to be sure there was a recovery image on the phone, then just reboot and it was all ok stock 1.6 2.00016 build

so if the error is "server connection failed" after succesful flashed images, it just fails to restart the phone -.-

[Guest Toystory]

for my case

When I flash the phone, the computer is out of power supply

now the phone stuck in the bootloader with message usb_init

when boot with usb unplug, the phone show poweroff charging in the bootloader

anything I can do or do I have break the phone