Guest Thykka Posted July 4, 2010 Report Posted July 4, 2010 (edited) Hi! I've been using modaco 1.5 for a while and now that the modaco 2.1 came out, I tried to install it. Installation didn't work (boot loop) so i restored my nandroid backup. Everything seemed to work just fine until I tried to mount the sdcard on my pc with the usb cable; it mounts and dismounts almost right after that. Now there's a notification "damaged sd card" which offers the option to format, but this seems to do absolutely nothing. I also tried with another sdcard, but the very same problem persists (instead of "damaged sd card" it says "blank sd card" though, can't format it either) The next step would prolly be buying a microSD card reader so I can access the card with my PC, but it's Sunday and I can't get one until tomorrow. Also, tried to downgrade to RUU 2.73.405.5, but it failed too. Any ideas or suggestions? Edited July 4, 2010 by Thykka
Guest Lordsmiff Posted July 4, 2010 Report Posted July 4, 2010 My suggestion would be power off your phone, take the SD card out and give the contacts on it wipe or two with your fingers. Then blow into the sd card slot and make sure nothing is in there. Boot back up and give it a try - let us know :lol: Smiffy.
Guest Thykka Posted July 4, 2010 Report Posted July 4, 2010 (edited) My suggestion would be power off your phone, take the SD card out and give the contacts on it wipe or two with your fingers. Then blow into the sd card slot and make sure nothing is in there. Reminds me of the time I played super mario on NES. But it didn't help. I also tried formatting the mc with ADB, but I can't find any file beginning with "sd" in /dev/. Shouldn't there be one? # ls ls adsp keychord ptmx akm8973_aot kmsg pts akm8973_daemon log qmi0 alarm msm_aac qmi1 android_adb msm_audpre qmi2 android_adb_enable msm_mp3 random ashmem msm_pcm_ctl smd0 binder msm_pcm_in smd27 block msm_pcm_out socket bma150 msm_snd tty console mt9p012 ttyHS0 cpu_dma_latency mtd ttyMSM2 device-mapper network_latency ttyfs diag network_throughput uinput diag_arm9 null urandom emapi oncrpc voc_rx_playback full pmem voc_rx_record graphics pmem_adsp voc_tx_playback htc-acoustic pmem_camera voc_tx_record htc-portlist pmem_gpu0 zero hw3d pmem_gpu1 input ppp # Edited July 4, 2010 by Thykka
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now