Guest twrock Posted December 19, 2010 Report Share Posted December 19, 2010 (edited) same thing happens can clockwork install improperly? i had to click twice or three time when i tried to install it. and if so can it be fixed somehow? can i remove it, installing the stock recovery than trying it again? i tried flashing stock 2.1 but it didnt help Yes, you can try to flash the stock recovery through fastboot (if you have it) or try AmonRA Recovery and then return to ClockWork Recovery. If all else fails, you can reflash a stock /dload/updata.app rom and it will return you to the stock recovery image, but you will lose everything else that way. (And of course, always back things up before messing with any part of your rom.) Edit: my apologies, I had not noticed that you had a broken USB port. But I don't see anything wrong with your thinking "in theory". (I.e. I have not done anything like that, so I can't be sure; all my flashing of recovery has been done through fastboot.) Edited December 19, 2010 by twrock Link to comment Share on other sites More sharing options...
Guest margariins Posted December 30, 2010 Report Share Posted December 30, 2010 Fixed clockworkmod recovery to support ext3 so people with ext3 partitions can backup sd-ext http://flibblesan.co.uk/android/flbmod/rec...5.0.4-pulse.zip Few questions, Does this work for u8220-6? Also, when I attach my huawei to PC in volume down+red+power, PC reacts, but shows that there is no sowftware for this device. Will then running instal.recovery.windows.bat have any effect? thanks Link to comment Share on other sites More sharing options...
Guest jeddy1 Posted December 31, 2010 Report Share Posted December 31, 2010 (edited) Few questions, Does this work for u8220-6? Also, when I attach my huawei to PC in volume down+red+power, PC reacts, but shows that there is no sowftware for this device. Will then running instal.recovery.windows.bat have any effect? thanks Yes it should work and what effect u mean?pushing that is going to install the recovery image.if u install the drivers 2.1 of pulse on ur pc it will recognize it. Edited December 31, 2010 by jeddy1 Link to comment Share on other sites More sharing options...
Guest margariins Posted January 1, 2011 Report Share Posted January 1, 2011 Yes it should work and what effect u mean?pushing that is going to install the recovery image.if u install the drivers 2.1 of pulse on ur pc it will recognize it. Ok, I installed clockwork, all went well, works fine. New problem - I'm trying to make backup, but it stops in the middle. looks like this : backing up boot... backing up recovery... backing up system... HwIME.apk stays like that Link to comment Share on other sites More sharing options...
Guest gege001 Posted January 22, 2011 Report Share Posted January 22, 2011 i can't install it from rom manager. when i select "Flash clockworkMod Recovery" nothing happens. under "Flash clockworkMod Recovery" i can see the text "current recovery: clockworkMod unknown" but when i reboot into recovery it's still the AmonRA recovery. what should i do? has anyone the same problem? or am i just stupid? Link to comment Share on other sites More sharing options...
Guest gege001 Posted January 22, 2011 Report Share Posted January 22, 2011 i can't install it from rom manager. when i select "Flash clockworkMod Recovery" nothing happens. under "Flash clockworkMod Recovery" i can see the text "current recovery: clockworkMod unknown" but when i reboot into recovery it's still the AmonRA recovery. what should i do? has anyone the same problem? or am i just stupid? Ok i managed to install the recovery menu. i had to download a newer version of ROMManager cus mine was included in the rom so it wasn't updated. Link to comment Share on other sites More sharing options...
Guest beneix Posted January 23, 2011 Report Share Posted January 23, 2011 I have used FLB for several months but something's wrong so I needed to rebuild. I had Clockworkmod 2.5.0.4 already on my Pulse so I set about installing FLB-Mod 1.7. However, I can't seem to find the "partition SD card" option anywhere in the Clockworkmod menus; I want to have A2SD so this really stops me in my tracks. What am I missing? I have a "partitions menu" but that only contains options to mount and format, and when I format my SD card there that's all it does -- it doesn't give me any options to partition the card. I must be missing something fundamental because I remember partitioning the card when I installed FLB in September... Link to comment Share on other sites More sharing options...
Guest Fusion0306 Posted January 23, 2011 Report Share Posted January 23, 2011 I have used FLB for several months but something's wrong so I needed to rebuild. I had Clockworkmod 2.5.0.4 already on my Pulse so I set about installing FLB-Mod 1.7. However, I can't seem to find the "partition SD card" option anywhere in the Clockworkmod menus; I want to have A2SD so this really stops me in my tracks. What am I missing? I have a "partitions menu" but that only contains options to mount and format, and when I format my SD card there that's all it does -- it doesn't give me any options to partition the card. I must be missing something fundamental because I remember partitioning the card when I installed FLB in September... You can do it through Rom Manager Link to comment Share on other sites More sharing options...
Guest beneix Posted January 24, 2011 Report Share Posted January 24, 2011 You can do it through Rom Manager OK, please help me understand what you mean. Following this guide, I read that I should "Return to the Main menu in the Custom recovery Image and select 'Partition SD Card'". Isn't this the menu on the device itself, headed up "Clockworkmod Recovery v2.5.0.4"? Is the "Rom Manager" that you refer to something different? Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted January 24, 2011 Report Share Posted January 24, 2011 For that you've to install armon-ra-recovery. Has not as many options as CWM have but you can format your card with it. Link to comment Share on other sites More sharing options...
Guest avenn Posted January 28, 2011 Report Share Posted January 28, 2011 (edited) I can not get Clockwork Recovery installed. I followed the method: -------- Download recovery-clockwork-2.5.0.4-pulse.zip Extract the archive. Put your device in bootloader mode - turn if off, then tap the power-button while holding the 'Volume Down' and 'End (Red)' keys Run the bat file to install recovery. ------- The bootloader mode is a blue screen where at the top is written in white "usb Fastboot: v0.5" Then i connect the phone to the PC. Then I run the "install-recovery-windows.bat" file. When i do this a black window pups up for 2 short sec. First it says in the black window: sending 'recovery' 3070 kb... OKAY Next it says: writing 'recovery'... OKAY Then the black window closes automatically. (all this happens in just 2 short seconds) Now during or after these steps i did NOTHING changes on the blue screen of the pulse I'm running windows XP and i have installed the PC suite from the 2.1 update. When i plug in the pulse while the phone is running it recognizes it perfectly (4devices). When i connect the phone to my PC in bootloader mode it i get a popup in the right corner of my pc that says "android 1.0" Edited January 28, 2011 by avenn Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted January 28, 2011 Report Share Posted January 28, 2011 is your phone already rooted? I guess not. Otherwise root it first, flash CWR again, remove battery and insert again, press menu+red+power on. Works 1000 percent :lol: Link to comment Share on other sites More sharing options...
Guest Boony123 Posted January 28, 2011 Report Share Posted January 28, 2011 press menu+red+power on. Works 1000 percent ;) think you need do that, an install a custom rom to get root access. once that is done you can update the CWR to 3.0.0.7 via the app. Link to comment Share on other sites More sharing options...
Guest avenn Posted January 28, 2011 Report Share Posted January 28, 2011 is your phone already rooted? I guess not. Otherwise root it first, flash CWR again, remove battery and insert again, press menu+red+power on. Works 1000 percent ;) Oh my god... This is it!!! I had to "press menu+red+power on" to boot clockwork... Thank you soooooo much eckengucker1 & Boony123, you made my day, no you made my month!!!! Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted January 28, 2011 Report Share Posted January 28, 2011 But if you fllash CWR 3 you wont be able to flash the Pulse roms. The common update script used by our roms isn't compatible with CWR 3! Link to comment Share on other sites More sharing options...
Guest AntonioPT Posted January 28, 2011 Report Share Posted January 28, 2011 But if you fllash CWR 3 you wont be able to flash the Pulse roms. The common update script used by our roms isn't compatible with CWR 3! The CM update script is the new update-script + update-binary, so it is compatible with cwr 3. Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted January 28, 2011 Report Share Posted January 28, 2011 ah good to know Link to comment Share on other sites More sharing options...
Guest eckengucker1 Posted January 28, 2011 Report Share Posted January 28, 2011 Ok, thats not true. v6 isn't working correct with CWR 3 Link to comment Share on other sites More sharing options...
Guest Boony123 Posted February 2, 2011 Report Share Posted February 2, 2011 Ok, thats not true. v6 isn't working correct with CWR 3 indeed the cw3 dont work with cm6 ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now