help my liquid is dead

[Guest rmaf]

when i was flashing the 100.39bin i wrongly selected install fastboot and after that I can´t turn on flash new bin and my pc don't detect the usb :(

help me please

[Guest HustlinDaily]

Tried booting into recovery?

Make sure USB is disconnected

Remove and replace battery

At the same time, hold down Camera+Volume Down+Power

Phone should vibrate 2-3 times

Let go of all 3 buttons

Press power like you would when you are normally turning on the phone

Once it boots into recovery, try seeing if PC can recognize it there.

[Guest rmaf]

Tried booting into recovery?

Make sure USB is disconnected

Remove and replace battery

At the same time, hold down Camera+Volume Down+Power

Phone should vibrate 2-3 times

Let go of all 3 buttons

Press power like you would when you are normally turning on the phone

Once it boots into recovery, try seeing if PC can recognize it there.

the phone vibrate but don't boot in recovery and the usb don't recognize. PLEASE HELP

[Guest HustlinDaily]

Might be risky but try booting into bootloader/fastboot:

1. Remove battery and replace battery.

2. plug in PC-connected USB cable

3. Camera button + "<" then Power.

[Guest rmaf]

Might be risky but try booting into bootloader/fastboot:

1. Remove battery and replace battery.

2. plug in PC-connected USB cable

3. Camera button + "<" then Power.

COOL :(

After doing what you said. the USB as been detected

Flashed the 100.39 bin and the liquid is back from the deads

PROBLEM SOLVED

Many thanks to all who helped me. And thanks to this great community